Abstract:Photonic crystal (PhC) cavities have drawn plenty of attentions during the past several decades for the advantages of ultra-high Q factor and small mode volume. PhC cavities have various applications such as quantum information processing, low threshold lasers, optomechanics, and nonlinear optics. PhC cavities based on silicon material have been heavily investigated due to their compatibility with complementary metal-oxide-semiconductor (CMOS) technology, small feature size and low cost. However, apart from the advantage of high Q factor, silicon based PhC cavities suffer from the drawbacks of high insertion loss because of the mode mismatch with fiber and relatively low sensitivity especially for the sensing application. On the other hand, silicon dioxide (silica) waveguide experience relatively smaller loss and owns a similar refractive index to numerous liquid materials to be detected, which will leads to high sensitivity for a silica based PhC cavity sensor. In this paper, we propose a high Q factor (Q = 15500) silica based PhC nanobeam cavity with high sensitivity (the wavelength shift per refractive index unit (RIU) is S = 338 nm/RIU) at the telecommunication wavelength (1550 nm). Since the refractive index contrast for silica waveguide is low for the realization of the photonic bandgaps, it is essential to utilize a silica waveguide suspended in free space. The PhC nanobeam cavity is then formed by etching a series of elliptical holes, whose dimensions linearly decrease from the center to both ends, directly into the silica waveguide. For the sake of high transmission on-resonance wavelength while maintaining high Q factor, it's important to etch partly into the waveguide, which results in a low-refractive-index perturbation structure. The calculated on-resonance transmission is about 0.26. The novel proposed PhC nanobeam cavity shows a sensitivity 3 times larger than the one based on silicon counterparts and outperforms other low index-contrast PhC cavities by a higher on-resonance transmission. Such a structure can also be used in spectrally filtering system and nonlinear optics.

High-Performance Microcavity Optical Sensor Connected With A Waveguide

Optical Waveguide Double-Ring Sensor Using Intensity Interrogation with a Low-Cost Broadband Source

Silicon optical waveguides using photonic bandgap for bioparticle sensing

Coupled Optical Microcavities: an Enhanced Refractometric Sensing Configuration

Intensity-Interrogated Sensor Based on Cascaded Fabry–Perot Laser and Microring Resonator

Experimental Investigation of Waveguide Sensor Based on Cascaded-Microring Resonators with Vernier Effect

Analysis and Design of Refractive Index Biosensors Based on Single Silicon Nanobeam Cavity

Highly-sensitive Optical Waveguide Sensor Based on SiON Using Two Cascaded-Microring Resonators

High-Q Weakly Modulated Nanobeam Cavity Based On A Suspended Silicon Dioxide Waveguide

Ultracompact refractive index sensor based on microcavity in the sandwiched photonic crystal waveguide structure

Study on the Nanosensor Based on a MIM Waveguide with a Stub Coupled with a Horizontal B-Type Cavity

Sense High Refractive Index Sensitivity with Bragg Grating and MIM Nanocavity

Dual Waveguide Coupled Microring Resonator Sensor Based on Intensity Detection

Highly Sensitive Sensor Based on an Ultra-High-Q Mach-Zehnder Interferometer-Coup Led Microring

Highly Sensitive Optical Fiber Micro-Cavity Sensors

A High-Performance Refractive Index Sensor Based on Hybrid Resonance Modes in a Square Nanocavity Coupled with Metal–Insulator–Metal Plasmonic Waveguide

Micro Sensors Based on Planar Microtoroid Cavities

Tunable Nanosensor With a Horizontal Number Eight-Shape Cavity in a MIM Waveguide System

Highly Sensitive Si Nanowire-Based Optical Sensor Using A Mach-Zehnder Interferometer Coupled Microring

High-mechanical-frequency Characteristics of Optomechanical Crystal Cavity with Coupling Waveguide.

Integrated High-Q Optomechanical Nanobeam Cavity for Refractive Index Sensing