Abstract:To verify the effect of oxygen vacancy on gas sensitivity, we have systematically investigated the gas-sensing performance of copper oxide/substoichiometric tungsten oxide (CuO/WO3-x) nanocomposite sensors. Oxygen deficiency in WO3-x facilitates the reaction of hydrogen sulfide (H2S) gas with chemisorbed oxygen species (i.e., O2-, O-, and O2-) at low temperature. The oxygen/sulphur exchange reaction between CuO and H2S in the sensing process can achieve room temperature operation of gas sensors. After the WO3-x nanorods were modified by a low content of CuO nanoparticles (Cu:W = 1:20), the sensors present an n-type sensing behavior. Their best working temperatures drop from 289 °C (or 386 °C) to 99 °C (or 70 °C) at which the responses are improved by 14 to 163 times for different x values. Among them, CuO(L)/W5O14 shows the highest sensitivity of 1575.7 to 10 ppm H2S at 99 °C and 171.5 to 10 ppm H2S at room temperature. Once WO3-x were loaded with a high concentration of CuO nanoparticles (Cu:W = 1:2), they exhibit a p-type behavior, and the optimal working temperatures reduce suddenly to room temperature at which CuO(H)/W18O49 displays the most sensitive response of 7.2 even toward trace amounts of H2S as low as 100 ppb. In addition, p-type CuO weakens the metal-like characteristics of W18O49 and such weakening effect enhances with an increase in the CuO content. Therefore, the sensing performance of the CuO/W18O49 composite is the best among the four CuO/WO3-x sensors. The two designs for low and high Cu/W molar ratios all achieve enhanced room-temperature H2S gas response, with a fast recovery time of ∼60 s under heating pulse, as well as an excellent selectivity, which makes the sensors a promising candidate for practical applications. Moreover, the micro-Raman spectra confirmed CuS formation and the thermal effect on the decomposition of CuS in the sensing process was studied.

Effect of Growth Temperature and Time on Morphology and Gas Sensitivity of Cu2O/Cu Microstructures

Nanocomposites of Carbon Nanotube (cnts)/cuo with High Sensitivity to Organic Volatiles at Room Temperature

Praparation Of Cuo With Wing-Like Morphology Of Cicada And Its Absorption Properties To Organic Volatiles

Effect of Solution Concentration on Surface Morphology, Chemical Composition and Photoresponse of CuO/Cu2O Composite Thin Films Grown by Hydrothermal Synthesis

Morphology Investigation of Hydrothermally Prepared ZnO Micro-Crystals Influenced by Cu2+ Ions

Morphology-Dependent Gas Sensing Properties of CuO Microstructures Self-Assembled from Nanorods

Hydrothermal Synthesis and Annealing Effect on the Properties of Gas-Sensitive Copper Oxide Nanowires

Enhanced performance of the tangerines-like CuO-based gas sensor using ZnO nanowire arrays

Synthesis of flower-like CuO nanostructures as a sensitive sensor for catalysis

Studies on Sensing Properties and Mechanism of CuO Nanoparticles to H2S Gas

Enhancement of Low-Temperature Gas-Sensing Performance Using Substoichiometric WO 3– x Modified with CuO

Preparation of CuO Nanowires by Simple Thermal Oxidation and Their Gas-Sensing Property

Enhancement of Low-Temperature Gas-Sensing Performance Using Substoichiometric WO3-x Modified with CuO.

Microwave-assisted hydrothermal synthesis of copper oxide-based gas-sensitive nanostructures

High Performance Gas Sensor Based on ZnO/CuO Heterostructures

Cu2O–CuO Composite Microframes with Well-Designed Micro/nano Structures Fabricated Via Controllable Etching of Cu2O Microcubes for CO Gas Sensors

CO gas sensors based on p-type CuO nanotubes and CuO nanocubes: Morphology and surface structure effects on the sensing performance

Star-Fruit-Shaped CuO Structures for High Performance Ethanol Gas Sensor Device

Facile wet chemical synthesis of Al doped CuO nanoleaves for carbon monoxide gas sensor applications

Highly sensitive ethanol gas sensor based on CuO/ZnSnO3 heterojunction composites

Morphology-dependent formaldehyde detection of porous copper oxide hierarchical microspheres at near-room temperature