Abstract:Development of miniaturized electronics has stimulated demand for integration of energy storage units with electronic circuits. Micro-supercapacitors can be a promising strategy for future application in microelectric devices because of their properties of high power density, high-rate capability, long lifetime and high-frequency response. Progress in micro-fabrication technology has enabled on-chip micro-supercapacitors in an interdigitated planar form be compatible with integrated circuit. From a material perspective, nanostructured carbon-based materials are commonly used in electric double-layer micro-supercapacitors. In addition, transition metal oxides such as ruthenium oxide and manganese oxide, and some conducting polymers such as polypyrrole and polyaniline have been used as electrodes for pseudo-capacitive micro-supercapacitors. MnO2-based pseudocapacitive electrodes have been considered as a promising candidate because of their high theoretical specific capacitance (1,370 F/g), environmentally friendly nature and low cost of raw materials. The main drawback of MnO2 is that the poor conductivity may limit the charge/discharge rate for high-power applications. However, Lang et al. have show that hybrid structures made of nanoporous gold and nanocrystalline MnO2 have enhanced conductivity, resulting in a specific capacitance close to the theoretical value (~1,145 F/g)[1]. The nanoporous gold not only plays a role as a double-layer capacitor, but also promotes electron transport through the MnO2 and benefits fast ion diffusion between the MnO2 and the electrolytes. Besides, the excellent mechanical properties enable nanoporous gold to be amenable to micro-fabrication processes[2]. The high specific capacitances and charge/discharge rates offered by such nanoporous gold/MnO2 hybrid structures make them promising candidates as electrodes in micro-supercapacitors. Herein, we make our efforts in preparing high-performance nanoporous gold/MnO2 hybrid electrodes by electrodepositon method and fabricating micro-supercapacitors in interdigitated planar form. Our electrodeposited nanoporous gold/MnO2hybrid electrodes also have a specific capacitance close to the theoretical value (>1,000 F/g). The preparation and performance of hybrid electrodes and micro-supercapacitors will be presented. 1. Lang, X.Y., et al., . Nature Nanotechnology, 2011. 6(4): p. 232-236. 2. Jin, H.J. and J. Weissmüller, Science, 2011. 332: p. 1179-1182.

Rapid, All Dry Microfabrication Of Three-Dimensional Co3o4/Pt Nanonetworks For High-Performance Microsupercapacitors

Silicon-nanoforest-based solvent-free micro-supercapacitors with ultrahigh spatial resolution <i>via</i> IC-compatible <i>in situ</i> fabrication for on-chip energy storage

Fabrication of A 3d Micro/Nano Dual-Scale Carbon Array and Its Demonstration As the Microelectrodes for Supercapacitors

Direct prototyping of 3D micro supercapacitors based on in-situ fabricated nanoporous carbon electrodes

High-performance, Flexible, Solid-State Micro-Supercapacitors Based on Printed Asymmetric Interdigital Electrodes and Bio-Hydrogel for On-Chip Electronics

Scalable Fabrication Of Mno2 Nanostructure Deposited On Free-Standing Ni Nanocone Arrays For Ultrathin, Flexible, High-Performance Micro-Supercapacitort

Solid-State Flexible Micro Supercapacitors by Direct-Write Porous Nanofibers

On-chip High-Energy Interdigital Micro-Supercapacitors with 3D Nanotubular Array Electrodes

Ultra-fine CuO Nanoparticles Embedded in Three-dimensional Graphene Network Nano-structure for High-performance Flexible Supercapacitors

Micro Supercapacitors for Energy Storage, On-Chip Devices Based on Prototyping of Patterned Nanoporous Carbon

On-Chip Micro-supercapacitors Based on Nanoporous-Gold/ MnO2 Hybrid Electrodes

Carbon Nanotube@Nickel Hydroxide Nanosheets Core–Shell Nanostructures Enabling Thermally Assisted 3d‐printed Solid‐State Microsupercapacitors

Fabrication of MnO2/carbon Micro/nanostructures Based on Carbon-MEMS Technique on Stainless Steel Substrate for Supercapacitive Microelectrodes

Three-Dimensional Reduced Graphene Oxide/Poly(3,4-Ethylenedioxythiophene) Composite Open Network Architectures for Microsupercapacitors

3D Printing of Interdigitated Electrode for All-Solid-state Microsupercapacitors

A Study of Nano-Structured Manganese Dioxides and Their Composites As Electrode Materials for Micro Supercapacitors

Thin Co 3 O 4 Nanosheet Array on 3D Porous Graphene/nickel Foam As a Binder-Free Electrode for High-Performance Supercapacitors

High-Performance Microsupercapacitors based on Bio-Inspired Graphene Microfibers.

Cu(I)/Cu(II) Partially Substituting the Co(II) of Spinel Co3O4 Nanowires with 3D Interconnected Architecture on Carbon Cloth for High-Performance Flexible Solid-State Supercapacitors

Direct Electrodeposition of Electrically Conducting Ni3(HITP)2 MOF Nanostructures for Micro‐Supercapacitor Integration

Constructed Uninterrupted Charge-Transfer Pathways In Three-Dimensional Micro/Nanointerconnected Carbon-Based Electrodes For High Energy-Density Ultralight Flexible Supercapacitors