Abstract:Soft pneumatic actuators have been explored for endoscopic applications, but challenges in fabricating complex geometry with desirable dimensions and compliance remain. The addition of an endoscopic camera or tool channel is generally not possible without significant change in the diameter of the actuator. Radial expansion and ballooning of actuator walls during bending is undesirable for endoscopic applications. The inclusion of strain limiting methods like, wound fibre, mesh, or multi-material molding have been explored, but the integration of these design approaches with endoscopic requirements drastically increases fabrication complexity, precluding reliable translation into functional endoscopes. For the first time in soft robotics, we present a multi-channel, single material elastomeric actuator with a fully corrugated design (inspired by origami); offering specific functionality for endoscopic applications. The features introduced in this design include i) fabrication of multi-channel monolithic structure of 8.5 mm diameter, ii) incorporation of the benefits of corrugated design in a single material (i.e., limited radial expansion and improved bending efficiency), iii) design scalability (length and diameter), and iv) incorporation of a central hollow channel for the inclusion of an endoscopic camera. Two variants of the actuator are fabricated which have different corrugated or origami length, i.e., 30 mm and 40 mm respectively). Each of the three actuator channels is evaluated under varying volumetric (0.5 mls-1 and 1.5 mls-1 feed rate) and pressurized control to achieve a similar bending profile with the maximum bending angle of 150°. With the intended use for single use upper gastrointestinal endoscopic application, it is desirable to have linear relationships between actuation and angular position in soft pneumatic actuators with high bending response at low pressures; this is where the origami actuator offers contribution. The soft pneumatic actuator has been demonstrated to achieve a maximum bending angle of 200° when integrated with manually driven endoscope. The simple 3-step fabrication technique produces a complex origami pattern in a soft robotic structure, which promotes low pressure bending through the opening of the corrugation while retaining a small diameter and a central lumen, required for successful endoscope integration.

Corrugated V-fold soft actuator with large deformation and high force density

Multi-chamber Pneumatic Actuator for Peristaltic Soft Robot

A Single-Chamber Pneumatic Soft Bending Actuator With Increased Stroke-Range by Local Electric Guidance

Effective Enhanced Model for a Large Deformable Soft Pneumatic Actuator

Large-Displacement Micro Pneumatic Actuators Based on Corrugated Parylene Film

A finger-inspired pneumatic network actuator based on rigid-flexible coupling structure for soft robotic grippers

Design, Modeling, and Application of Reinforced-Airbag-Based Pneumatic Actuators with High Load and Cellular Rearrangement

An ultra-large deformation bidirectional actuator based on a carbon nanotube/PDMS composite and a chitosan film.

Design And Modeling Of A Hydraulic Soft Actuator With Three Degrees Of Freedom

Corrugated Diaphragm Actuator for Soft Robotic Applications

Fabrication of Soft Pneumatic Network Actuators with Oblique Chambers.

Tunable Folding Assembly Strategy for Soft Pneumatic Actuators

Design and Optimize of a Novel Segmented Soft Pneumatic Actuator

Investigation of the State Transition and Moving Boundary in a Pneumatic–Hydraulic Coupled Dielectric Elastomer Actuator

Design And Experiment Of A Fast-Soft Pneumatic Actuator With High Output Force

Self-Sustaining Pneumatic Micro Actuator for Large Deformation and 3D Morphology

Corrugated Diaphragm Actuator for Soft Robotic and Exoskeleton Applications

Topology Optimization Design and Experiment of a Soft Pneumatic Bending Actuator for Grasping Applications

A Pneumatic Novel Combined Soft Robotic Gripper with High Load Capacity and Large Grasping Range

An Origami-Based Soft Robotic Actuator for Upper Gastrointestinal Endoscopic Applications

Symmetrical Modeling of Physical Properties of Flexible Structure of Silicone Materials for Control of Pneumatic Soft Actuators