Abstract:Most traditional rigid grippers can cause damage to the surface of objects in actual production processes and are susceptible to factors such as different shapes, sizes, materials, and positions of the product. This article studies a flexible finger for flexible grippers, more commonly described as PneuNet, designs the structure of the finger, discusses the processing and manufacturing methods of the flexible finger, and prepares a physical model. The influence of structural parameters such as the thickness of the flexible finger and the angle of the air chamber on the bending performance of the finger was analyzed using the Abaqus simulation tool. An RBF-PID control algorithm was used to stabilize the internal air pressure of the flexible fingers. A flexible finger stabilization experimental platform was built to test the ultimate pressure, ultimate bending angle, and end contact force of the fingers, and the simulation results were experimentally verified. The results show that when the thickness of the flexible finger is 2 mm and the air chamber angle is 0 deg, the maximum bending angle of the flexible finger can reach about 136.3°. Under the same air pressure, the bending angle is inversely correlated with the air chamber angle and finger thickness. The experimental error of the bending angle does not exceed 3%, which is consistent with the simulation results as a whole. When the thickness is 2 mm, the maximum end contact force can reach about 1.32 N, and the end contact force decreases with the increase in the air chamber angle. The RBF-PID control algorithm used has improved response speed and a better control effect compared to traditional PID control algorithms. This article provides a clear reference for the application of flexible fingers and flexible grippers, and this research method can be applied to the analysis and design optimization of other soft brakes.

A finger-inspired pneumatic network actuator based on rigid-flexible coupling structure for soft robotic grippers

Design and Simulation Experiment of Rigid-Flexible Soft Humanoid Finger

A Bioinspired Gripper with Sequential Motion and Mutable Posture Enabled by Antagonistic Mechanism

Pneumatic Bionic Hand with Rigid-Flexible Coupling Structure

Three-Fingered Soft Pneumatic Gripper Integrating Joint-Tuning Capability

Design and Fabrication of a Variable Stiffness Soft Pneumatic Humanoid Finger Actuator

Bioinspired Robotic Fingers Based on Pneumatic Actuator and 3D Printing of Smart Material

Design of Humanoid Robotic Hand Based on Link Underactuation

A 3D printed Two DoF Soft Robotic Finger With Variable Stiffness

Bioinspired Multimodal Multipose Hybrid Fingers for Wide-Range Force, Compliant, and Stable Grasping

Design of a Soft Pneumatic Robotic Gripper Based on Fiber-reinforced Actuator

3D Printed, Modularized Rigid-Flexible Integrated Soft Finger Actuators for Anthropomorphic Hands

Study on the Articulated Finger Based on Pneumatic Soft Joint

Anthropomorphic Soft Pneumatic Fingers Towards Full Dexterity of Human Hand

Soft Humanoid Hands with Large Grasping Force Enabled by Flexible Hybrid Pneumatic Actuators.

Structural Design and Control Performance Study of Flexible Finger Mechanisms for Robot End Effectors

Soft Pneumatic Gripper Integrated with Multi‐configuration and Variable‐stiffness Functionality

An Anthropomorphic Robotic Hand with a Soft-Rigid Hybrid Structure and Positive- Negative Pneumatic Actuation

A Two-Finger Soft-Robotic Gripper with Enveloping and Pinching Grasping Modes

Stiffness-Tunable Soft Gripper with Soft-Rigid Hybrid Actuation for Versatile Manipulations

Universal soft pneumatic robotic gripper with variable effective length