Abstract:Interfacial trap-assisted non-radiative recombination and residual stress impede the further increase of power conversion efficiency (PCE) and stability of the methylammonium-free (MA-free) perovskite solar cells (PSCs). Here, we report an interfacial defect passivation and stress release strategy through employing the multi-active-site Lewis base ligand (i.e., (5-mercapto-1,3,4-thiadiazol-2-ylthio)acetic acid (MTDAA)) to modify the surface and grain boundaries (GBs) of MA-free perovskite films. Both experimental and theoretical results confirm strong chemical interactions between multiple active sites in the MTDAA molecule and undercoordinated Pb2+ at the surface or GBs of perovskite films. It is demonstrated theoretically that multi-active-site adsorption is more favorable thermodynamically as compared to single-active-site adsorption, regardless of PbI2 termination and formamidinium iodide (FAI) termination types. MTDAA modification results in much reduced defect density, increased carrier lifetime, and almost thoroughly released interfacial residual stress. Upon MTDAA passivation, the PCE is boosted from 20.26% to 21.92%. The unencapsulated device modified by MTDAA maintains 99% of its initial PCE after aging under the relative humidity range of 10–20% for 1776 h, and 91% after aging at 60 °C for 1032 h.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsenergylett.1c00794?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsenergylett.1c00794</a>.Experimental Section (including materials, device fabrication, and characterization), J–V curves, XRD patterns, UV–vis absorption spectra, Tauc plot, SEM images, FTIR spectra, PL spectra, Nyquist plots, equivalent circuit, Mott–Schottky plot, statistical diagrams of photovoltaic parameters, chemical structures of the single-active-active passivation molecules, stability data, photovoltaic performance of the devices based on different MA-free perovskite compositions, TRPL fitting results, summary of champion and average photovoltaic parameters of the devices modified by different concentrations of MTDAA, summary of photovoltaic performance of reported high-efficiency CsFA-based MA-free PSCs to date, and photovoltaic performance of the devices based on different modifiers (<a class="ext-link" href="/doi/suppl/10.1021/acsenergylett.1c00794/suppl_file/nz1c00794_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Interfacial Modification of Perovskite Solar Cells using an Ultrathin MAI Layer Leads to Enhanced Energy Level Alignment, Efficiencies, and Reproducibility.

Interfacial Defect Passivation and Stress Release via Multi-Active-Site Ligand Anchoring Enables Efficient and Stable Methylammonium-Free Perovskite Solar Cells

Methylammonium halide salt interfacial modification of perovskite quantum dots/triple-cation perovskites enable efficient solar cells

Dual‐Interface Modification for Inverted Methylammonium‐Free Perovskite Solar Cells of 25.35% Efficiency with Balanced Crystallization

Enhanced Optoelectronic Quality of Perovskite Films with Excess CH3NH3I for High-Efficiency Solar Cells in Ambient Air

Interfacial Modulation through Mixed‐Dimensional Heterostructures for Efficient and Hole Conductor‐Free Perovskite Solar Cells

Controlled Crystallization and Enhanced Performance of γ‐CsPbI3 Perovskite Through Methylammonium Iodide‐Assisted Coevaporation

2D PEA 2 PbI 4 –3D MAPbI 3 Composite Perovskite Interfacial Layer for Highly Efficient and Stable Mixed-Ion Perovskite Solar Cells

Performance Enhancement of Perovskite Solar Cells Via Material Quality Improvement Assisted by MAI/IPA Solution Post-Treatment

Effects of Methylammonium Acetate on the Perovskite Film Quality for the Perovskite Solar Cell

Enhancing the Efficiency and Stability of Triple-Cation Perovskite Solar Cells by Eliminating Excess PbI2 from the Perovskite/Hole Transport Layer Interface

Regulated Film Quality With Methylammonium Bromide Addition In A Two-Step Sequential Deposition To Improve The Performance Of Perovskite Solar Cells

Effects of Formamidinium and Bromide Ion Substitution in Methylammonium Lead Triiodide Toward High-Performance Perovskite Solar Cells

Suppressing Ion Migration by Synergistic Engineering of Anion and Cation towards High‐Performance Inverted Perovskite Solar Cells and Modules

Ionic-liquid Induced Enhanced Performance of Perovskite Light-Emitting Diodes

Surface-Orientation Elimination of Vapor-Deposited PbI 2 Flakes for Efficient Perovskite Synthesis on Curved Solar Cells

Modulation of Ionically Generated Space Charge Effects at Hybrid Perovskite and Oxide Interfaces via Surface Modification

Reducing surficial and interfacial defects by thiocyanate ionic liquid additive and ammonium formate passivator for efficient and stable perovskite solar cells

Interface Modification for Efficient and Stable Inverted Inorganic Perovskite Solar Cells

Molecularly Tailored Surface Defect Modifier for Efficient and Stable Perovskite Solar Cells

High-Efficiency Perovskite Solar Cells with Improved Interfacial Charge Extraction by Bridging Molecules