Abstract:In the oil-injection compressor system, it is necessary to separate the lubricating oil by sequentially applying the mechanical separator and the separating filter element, however, the oil-gas separation filter has disadvantages such as short service life, high cost, and great environmental pollution. In this paper, a porous plate separator is proposed to achieve the coalescence of small oil droplets, and then the larger droplets can be removed by mechanical collisions driven by turbulence flow in the separator. This device is designed to be used after the primary separator, in the hope of replacing the separation filter element. The structure of the porous plate oil-gas separator is constructed through the staggered arrangement of two porous plates, and the two-phase flow characteristics in the separator are simulated through the Euler-Lagrangian method with the droplet's behavior of collision and breakup considered. The hole diameter, hole distance, plate distance, and inlet velocity are the key parameters of the separator, and these parameters are combined through the orthogonal design method to form several different structures and working conditions. The results of range analysis and pressure difference distribution under different layers are analyzed comprehensively, so the best combination is determined in terms of particle size growth rate, oil separation efficiency, and pressure loss. The designed structure is machined, and a test bench is set up, so the performance of the porous plate separator is experimentally tested. It is found that the simulation results are in good agreement with the experimental data, and the best simulated conditions are also verified by the experiment. When the inlet velocity is 0.2 m & sdot;s- 1, the optimal scheme is suggested as follows: Hole diameter = 1.5 mm; Hole distance = 3 mm; Plate distance = 1 mm; plate layers = 40.

Foam metal filtering spiral type oil separator

A FACILE WAY TO PREPARE A SPONGE/CELLULOSE FIBER COMPOSITE AND ITS APPLICATION IN OIL/WATER SEPARATION

Tubular oil-water separator and spiral flow generator therefor

Design and Optimization of a Novel Porous Plate Oil–gas Separator

Oil gas separation device

Gas-oil-water three-phase separating device

Oil tank with cellular metal foam structure for vehicle

Carbon nanofiber based superhydrophobic foam composite for high performance oil/water separation

Facile fabrication of expanded graphite/polydimethylsiloxane foams for oil–water separation

Defoamer for oil-gas separation

Fabrication of super-wetting copper foam based on laser ablation for selective and efficient oil-water separation

Oil/water separation through dual-channeled superhydrophobic/underwater superoleophobic meshes toward continuous processes

High mechanical CuO@stainless steel mesh for continuous and durable separation of surfactant-stabilized viscous and light/heavy-mixed oily emulsions in liter-scale

Design and preparation of efficient, stable and superhydrophobic copper foam membrane for selective oil absorption and consecutive oil–water separation

One-Step Preparation of Robust Superhydrophobic Foam for Oil/Water Separation by Pulse Electrodeposition

High-efficiency oil/water separation of hydrophobic stainless steel Mesh filter through carbon and fluorine surface treatment

Laser-structured superhydrophobic/superoleophilic aluminum surfaces for efficient oil/water separation

Continuous separation of oil/water mixture by a double-layer corrugated channel structure with superhydrophobicity and superoleophilicity

Experimental study of the pressure loss in aero-engine air-oil separators

Separation characters of an axial-flow hydrocyclone with oil collecting pipe

Oil press oil filtration apparatus