Abstract:Foam flooding is a crucial enhanced oil recovery technique for profile control during the oil displacement process. The stability of the foam is the key factor for the success of foam flooding, but typical aqueous foams generally lose their stability in the presence of hydrocarbons because of their low oil tolerance. Non-aqueous foams could possess outstanding stability in the presence of hydrocarbons as a result of their unique properties. However, few studies have been conducted on the stabilization mechanisms of non-aqueous foams in the presence of hydrocarbons. In this study, comparative experiments are performed to investigate differences in the stabilization mechanism between aqueous and non-aqueous foams. The results show that a non-aqueous foam had excellent oil tolerance in a bulk foaming test. Then, the stabilization mechanisms of foams are investigated in terms of surface dilatational viscoelasticity and liquid film thinning. For a non-aqueous foam system, the maximum viscoelastic modulus of 55 mN/m occurs at the maximum surfactant concentration used which was 5.0 wt% for this set of tests, which indicates that the liquid film of FS22 non-aqueous foam was more stable. In a foam film thinning experiment, the thinning time of an aqueous foam system is shortened but the liquid film thickness is increased by crude oil, whereas crude oil increased the thinning time of a non-aqueous foam system but decreased its liquid film thickness. In a non-aqueous foam system, the film could remain stable for hours before rupturing, which indicates that its stability in the presence of an oil phase is excellent. These results are meaningful for the understanding of the stabilization mechanisms of oil-based foams and the employment of non-aqueous foams for enhanced oil recovery.

Defoamer for oil-gas separation

Preparation of High Efficient Emulsion Antifoaming Agent

Physio-Chemical Analysis of Amide and Amine Poly(dimethylsiloxane)-Modified Defoamer for Efficient Oil-Water Separation

Synthesis of Polyether Modified Polysiloxane Defoaming Agent

Study on Defoaming Mechanism of Polyether Modified Polysiloxane Compounds

Aqueous emulsion non-silicon defoamer and preparation method thereof

Facile preparation of superhydrophobic melamine foam via one-pot emulsion polymerization for efficient oil/water separation

Thermally stable and superhydrophobic foam prepared by high‐internal phase emulsion for oil/water separation with good recycling capacity

Facile fabrication of expanded graphite/polydimethylsiloxane foams for oil–water separation

Molecular Understanding and Design of Porous Polyurethane Hydrogels with Ultralow-Oil-Adhesion for Oil–Water Separation

Simple preparation superhydrophobic melamine sponge via one-step emulsion polymerization for continuous oil/water separation in harsh environment

A novel pearls-like hierarchical porous silica aerogel monolith for efficient oil/water separation

Separation of silicone oil droplets dispersed in activated sludge

Gas-liquid surface characterization and liquid film thinning of Non-Aqueous foam

Preparation of pre-wetted underwater superoleophobic porous material from green water-based foam for oil–water separation

A novel foaming formulation with excellent salt-resistant for foam assisted deliquification of gas wells

Preparation of polystyrene and silane-modified nano-silica superhydrophobic and superoleophilic three-dimensional composite fiber membranes for efficient oil absorption and oil-water separation

Porous membrane with highly stable liquid-filled surface based on aerogel structure for oil-water separation

Carbon nanofiber based superhydrophobic foam composite for high performance oil/water separation

Robust superhydrophobic polyurethane sponge functionalized with perfluorinated graphene oxide for efficient immiscible oil/water mixture, stable emulsion separation and crude oil dehydration

Poly(vinylidene fluoride) membranes with underwater superoleophobicity for highly efficient separation of oil-in-water emulsions in resisting fouling