Abstract:A new method and separator for removing liquid in high velocity wet gas from pipeline are proposed.The swirler of four semi-elliptic guide vanes can achieve a stable and uniform swirling core-annular flow.Most part of gas core could be bypassed by split-flow method.With the increase of RLW height, the change rules of the splitting ratio KS and separation efficiency are studied.The effect of gas velocity on separation efficiency with different RLW height is studied.This paper proposes a new method for directly removing the liquid in wet gas from pipeline, especially for high velocity flow condition. The separation apparatus to be used is simply formed by enclosing a short section of the pipe with a compact cylinder and installing a swirler at the entrance. As gas-liquid mixture flows through the swirler downwardly, a strong swirl flow is created. Due to the centrifugal force, the two phases are isolated, forming a so-called swirling core-annular flow. Then a large portion of the gas core directly flows out of the separator, only the liquid film and a small portion of gas core (the conveying gas) enter the annular separation space through the upper portion of the ring-like window (RLW) in the pipe, where the conveying gas is separated from the liquid by centrifugal and gravitational forces and returns to the pipe through the lower part of the RLW. Numerical and experimental investigations were carried out in this study to determine the behavior of separation. The simulation and experimental results showed that the height of RLW has a strong effect on the behaviors of the separation, the conveying gas flowrate and the separation efficiency increase with the increase of RLW height, but the pressure drop also increases simultaneously. The separation efficiency even could approach 100% when the height of RLW is more than 1.5 pipe diameters with a 60% of conveying gas.

Gas-oil-water three-phase separating device

A novel horizontal gas–liquid pipe separator for wet gas based on the phase-isolation

Oil-Gas-Water Three-Phase Flow Measurement Based on the Theory of Partial Separation

Pilot Application of a Novel Gas–Liquid Separator on Offshore Platforms

Oil gas separation device

Oil-Water-Gas Three-Phase Separation in Multitube T-Junction Separators

Investigation on downhole gas-liquid two phase separation and mixing transportation characteristics with high gas fraction

Technologies and Applications of Pipeline-type Oil-gas-water Separation

Separation of high velocity wet gas by phase-isolation and split-flow method

Oil-gas separation pressure method

Experimental Study on a New Type of Separator for Gas Liquid Separation

Control system for gas-liquid separation device

Tubular oil-water separator and spiral flow generator therefor

Phase-isolation of Upward Oil–water Flow Using Centrifugal Method

Experimental study on a new gas–liquid separator for a wide range of gas volume fraction

Passive Control of Gas–liquid Flow in a Separator Unit Using an Apertured Baffle in a Parallel-Flow Condenser

Gas-liquid two-phase flow distribution using phase separation method

Separation characters of an axial-flow hydrocyclone with oil collecting pipe

Research on the Performance of a Passive Gas-Liquid Separator Used in Space

Experimental Study on a New Combined Gas–Liquid Separator

Research on gas–liquid separation characteristics in the helico-axial multiphase pump