Abstract:In this paper, all-inorganic CsPbIBr2 thin films were annealed by a two-step temperature-control process. All-inorganic, hole-transporting-layer-free, carbon-based planar perovskite solar cells (PSCs) with these CsPbIBr2 thin films (FTO/c-TiO2/CsPbIBr2/C) were fabricated. The effect of different first-step annealing temperatures during the two-step temperature-control process (50 degrees C/280 degrees C, 80 degrees C/280 degrees C, 100 degrees C/280 degrees C, 150 degrees C/280 degrees C, 180 degrees C/280 degrees C) on the photovoltaic conversion efficiency (PCE) of PSCs was investigated for the first time. When the first-step annealing temperature was 150 degrees C and the second-step annealing temperature was 280 degrees C, the highest efficiency of 8.31% was obtained. Without encapsulation, the solar cell could retain 97% of the initial PCE, when it was stored at 80 degrees C and zero humidity for 8 days. For comparison, solar cells with CsPbIBr2 films annealed by a one-step temperature-control process were fabricated. The highest PCE was 4.98%. From this, we could see that there is an increase of 66.9% in PCE, through using a two-step temperature-control annealing process. And also, in order to investigate why the PSCs by a two-step temperature-control annealing process has a higher PCE, all kinds of measurements were done for the first time. According to the results of the measurements, the perovskite film annealed by a two-step temperature-control process has a bigger crystal size, fewer grain boundaries, stronger PL and UV-vis absorption intensities, longer lifetime of minority carriers, less energy loss for hole transporting.

An annealing-free aqueous-processed anatase TiO 2 compact layer for efficient planar heterojunction perovskite solar cells.

Low‐Temperature in Situ Amino Functionalization of TiO2 Nanoparticles Sharpens Electron Management Achieving over 21% Efficient Planar Perovskite Solar Cells

All-inorganic, Hole-Transporting-layer-free, Carbon-Based CsPbIBr2 Planar Perovskite Solar Cells by a Two-Step Temperature-Control Annealing Process

Efficient Planar Perovskite Solar Cells with Low-Temperature Atomic Layer Deposited TiO2 Electron Transport Layer and Interfacial Modifier

Room-temperature processed TiO2 to construct composite electron transport layers for efficient planar perovskite solar cells

Interface Modification by Ammonium Sulfamate for High‐Efficiency and Stable Perovskite Solar Cells

Atomic Layer Deposition of TiO2 for a High-Efficiency Hole-Blocking Layer in Hole-Conductor-Free Perovskite Solar Cells Processed in Ambient Air

Highly efficient aqueous-processed polymer/nanocrystal hybrid solar cells with an aqueous-processed TiO2 electron extraction layer

Low-temperature Preparation of Titanium Dioxide Thin Layer for Highly Efficient CsPbI3 Perovskite Solar Cells

Low-temperature preparation of titanium dioxide thin layer for highly efficient CsPbI 3 perovskite solar cells

A Novel Annealing‐Free Amorphous Inorganic Metal Oxyhydroxide Cathode Interlayer for Efficient and Stable Inverted Perovskite Solar Cells

Organic-free Anatase TiO2 Paste for Efficient Plastic Dye-Sensitized Solar Cells and Low Temperature Processed Perovskite Solar Cells

Low-temperature Processed Tantalum/niobium Co-Doped TiO2 Electron Transport Layer for High-Performance Planar Perovskite Solar Cells

Green Low-Temperature-solution-processed in Situ HI Modified TiO2/SnO2 Bilayer for Efficient and Stable Planar Perovskite Solar Cells Build at Ambient Air Conditions

Electrochemical Reduction and Ion Injection of Annealing‐Free SnO2 for High Performance Perovskite Solar Cells

Composition and Energy Band–Modified Commercial FTO Substrate for in Situ Formed Highly Efficient Electron Transport Layer in Planar Perovskite Solar Cells

Low-temperature processed tantalum/niobium co-doped TiO 2 electron transport layer for high-performance planar perovskite solar cells

In Situ Surface Fluorination of TiO2 Nanocrystals Reinforces Interface Binding of Perovskite Layer for Highly Efficient Solar Cells with Dramatically Enhanced Ultraviolet‐Light Stability

Two-Second-Annealed 2D/3D Perovskite Films with Graded Energy Funnels and Toughened Heterointerfaces for Efficient and Durable Solar Cells.

24.8%-efficient planar perovskite solar cells via ligand-engineered TiO2 deposition

Interface Engineering for Efficient ETL-free Perovskite Solar Cells Via Self-Assembled Bifunctional Monolayer