Abstract:Rapid progress achieved on perovskite solar cells raises the expectation for their further development toward practical applications. Moisture sensitivity of perovskite materials is one of the major obstacles which limits the long-term durability of the perovskite solar cells, especially in outdoor operation where rainfall and water accumulation on the solar panels often occur. Micro/nanopinholes within the functional layers of the devices usually lead to water vapor penetration, thus subsequent decomposition of perovskites, and finally poor device performance and shortened operational lifetime. In this work, low-temperature atomic layer deposition (ALD) technique was utilized to incorporate pinhole-free metal oxide layers (TiO2 and Al2O3) into an inverted perovskite solar cell consisting of indium tin oxide/NiO/perovskite/PC61BM/TiO2/Ag. The interface properties between the inserted TiO2 layer and the perovskite layer were investigated by X-ray photoelectron spectroscopy. The results showed that TiO2 ALD fabrication process had made negligible degradation to the perovskite layer. The TiO2 layer can significantly reduce interfacial charge recombination loss, improve interfacial contact, and enhance water resistance. A maximum power conversion efficiency (PCE) of 18.3% was achieved for devices with TiO2 interface layers. A stacked Al2O3 encapsulation layer was designed and deposited on top of the devices to further improve device stability under harsh environmental conditions. The encapsulated devices with the best performance retained 97% of the initial PCE after being stored in ambient condition for a thousand hours. They also showed great water resistance, and no significant degradation in terms of PCE and photocurrent of the devices was observed after they were immersed in deionized water for as long as 2 h. Our approach offers a promising way of developing highly efficient and stable perovskite solar cells under real-world operational conditions.

Atomic Layer Deposition of TiO2 for a High-Efficiency Hole-Blocking Layer in Hole-Conductor-Free Perovskite Solar Cells Processed in Ambient Air

Efficient Planar Perovskite Solar Cells with Low-Temperature Atomic Layer Deposited TiO2 Electron Transport Layer and Interfacial Modifier

An Effective TiO2 Blocking Layer for Hole-Conductor-free Perovskite Solar Cells Based on Carbon Counter Electrode

Atomic Layer Deposited TiO2 Layer for Efficient Planar Perovskite Solar Cells

Low-temperature Preparation of Titanium Dioxide Thin Layer for Highly Efficient CsPbI3 Perovskite Solar Cells

Low-temperature preparation of titanium dioxide thin layer for highly efficient CsPbI 3 perovskite solar cells

Room-temperature processed TiO2 to construct composite electron transport layers for efficient planar perovskite solar cells

Low-Temperature Atomic Layer Deposition of Metal Oxide Layers for Perovskite Solar Cells with High Efficiency and Stability under Harsh Environmental Conditions

Highly Compact Tio2 Layer for Efficient Hole-Blocking in Perovskite Solar Cells

Low Temperature Solution-Derived TiO2-SnO2 Bilayered Electron Transport Layer for High Performance Perovskite Solar Cells

Stable Monolithic Hole-Conductor-Free Perovskite Solar Cells Using Tio2 Nanoparticle Binding Carbon Films

Atomic Layer Deposition of an Effective Interface Layer of TiN for Efficient and Hysteresis-Free Mesoscopic Perovskite Solar Cells

TiO2 Electron Transport Layer with P–n Homojunctions for Efficient and Stable Perovskite Solar Cells

A low-temperature TiO2/SnO2 electron transport layer for high-performance planar perovskite solar cells

TiO2/SnO2 Electron Transport Double Layers with Ultrathin SnO2 for Efficient Planar Perovskite Solar Cells

Low-temperature Fabrication of Carbon-Electrode Based, Hole-Conductor-free and Mesoscopic Perovskite Solar Cells with Power Conversion Efficiency > 12% and Storage-Stability > 220 Days

Low‐Temperature TiO2 Electron Transporting Layer for Planar Hole Transport Material‐Free Carbon Electrode‐CsFA‐Based Perovskite Solar Cells

Dopamine Sulfonate Ligand-Assisted TiO2 Deposition Enabling Highly Efficient and Stable Perovskite Solar Cells.

Nitrogen-Doped Titanium Dioxide as a Hole Transport Layer for High-Efficiency Formamidinium Perovskite Solar Cells

Al2O3 Underlayer Prepared by Atomic Layer Deposition for Efficient Perovskite Solar Cells.

Tin Oxide Bilayer as Effective Electron Transport Layers for Efficient and Stable Perovskite Solar Modules