Abstract:In recent years, the addition of Ni has been widely acknowledged to be capable of enhancing the mechanical properties of Al-Si alloys. However, the effect of Ni on the wear behaviors of Al-Si alloys and Al matrix composites, particularly at elevated temperatures, remains an understudied area. In this study, Al-Si-Cu-Mg-Ni/20wt% SiC particles (SiCp) composites with varying Ni contents were prepared by using a semisolid stir casting method. The effect of Ni content on the dry sliding wear behavior of the prepared composites was investigated through sliding tests at 25 and 350°C. Results indicated that the θ-Al 2 Cu phase gradually diminished and eventually disappeared as the Ni content increased from 0wt% to 3wt%. This change was accompanied by the formation and increase in δ-Al 3 CuNi and ε-Al 3 Ni phases in microstructures. The hardness and ultimate tensile strength of the as-cast composites improved, and the wear rates of the composites decreased from 5.29 × 10 −4 to 1.94 × 10 −4 mm 3 /(N·m) at 25°C and from 20.2 × 10 −4 to 7 × 10 −4 mm 3 /(N·m) at 350°C with the increase in Ni content from 0wt% to 2wt%. The enhancement in performance was due to the presence of strengthening network structures and additional Ni-containing phases in the composites. However, the wear rate of the 3Ni composite was approximately two times higher than that of the 2Ni composite due to the fracture and debonding of the ε-Al 3 Ni phase. Abrasive wear, delamination wear, and oxidation wear were the predominant wear mechanisms of the investigated composites at 25°C, whereas delamination wear and oxidation wear were dominant during sliding at 350°C.

Effect of Ni addition on the mechanical and degradation properties of hollow glass microsphere/Mg alloy composites

Preparation and properties of hollow glass microspheres reinforced Mg alloy degradable composites

Investigations on the Microstructure and Degradation Behavior of Hollow Glass Microspheres/Mg Alloy Composites

Microstructures and electrochemical hydrogen storage properties of novel Mg–Al–Ni amorphous composites

Enhanced Mechanical and Degradation Properties of Hollow Glass Microspheres/Mg Matrix Composites by Incorporating Copper Power for Degradable Downhole Tool Applications

Phase-structure and Hydrogen Storage Behaviors of Mg+10％ Ni2P Composite Prepared by Reactive Ball-Milling

A review on magnesium alloys for application of degradable fracturing tools

Tailoring the degradation rate of magnesium-lithium alloy with alloying elements of gadolinium and nickel

Microstructures, corrosion behavior and mechanical properties of as-cast Mg-6Zn-2X(Fe/Cu/Ni) alloys for plugging tool applications

Microstructure and electrochemical properties of amorphous composites of ball-milled Mg2Ni0.95Sn0.05 + x wt% Ni

The misalignment between degradation rate and mechanical integrity of Mg-Zn-Y-Nd alloy during the degradation evaluation in modified Hanks' solutions

Effect of Mg on Al-Mg Alloy and Electroless Ni-P Codeposition of nano-Al2O3: Mechanical, Wear, and Corrosion Resistance Properties

Preparation and characterization of micro-arc oxidation coating on hollow glass microspheres/Mg alloy degradable composite

Enhanced corrosion resistance and cytocompatibility of biodegradable Mg alloys by introduction of Mg(OH)2 particles into poly (L-lactic acid) coating

Effect of Ni content on the wear behavior of Al-Si-Cu-Mg-Ni/SiC particles composites

Research Progress in Degradation Behavior of Biodegradable Medical Mg-based Alloys in Vivo and in Vitro

Porous NiTi Particle Dispersed Mg-Zn-Ca Bulk Metallic Glass Matrix Composites

Effects of heat treatment on mechanical properties and degradation behavior of hollow glass microsphere reinforced Mg-15Al-5Zn-1.5Cu composites

Corrosion barriers induced by nano-heterogeneous structure in a biodegradable Mg Zn-based metal

Microstructure and compressive properties of Mg–9Al composite reinforced with Ni-coated graphene nanosheets

Microstructure, Mechanical Properties, and in Vitro Corrosion Behavior of Biodegradable Zn-1Fe-xMg Alloy