Abstract:Deposition of granular materials into a container is a general industrial packing process. In this study, the deposition behaviour of dilute granular mixtures consisting of two types of particles that were of the same particle size but different particle densities in the presence of air was numerically analyzed using a coupled discrete element method (DEM) and computational fluid dynamics (CFD). Bilayer granular mixtures with light particles at bottom and heavy particles at top were first simulated. It was found that the presence of air significantly affected the flow behaviour of the bilayer mixtures. For the system with a relatively low initial void fraction, the air entrapped inside the container escaped through the dilated zones induced due to the friction between the powder bed and wall surfaces. The escaping air streams entrained light particles that were originally located at the bottom of the granular system. Consequently, these light particles were migrated to the top of the granular bed at the end of deposition process. More light particles were migrated when the deposition distance was increased. For the system with a high initial void fraction, some light particles penetrated into the top layer of heavy particles and created a mixing zone. Deposition of random mixtures with different initial void fractions was also investigated and the influence of initial void fraction on the segregation behaviour was explored as well. It was found that the increase of void fraction promoted segregation during the deposition in air. It was demonstrated that, for granular mixtures consisting of particles of different air sensitivities, the presence of air had a significant impact on the mixing and segregation behaviour during the deposition.

Powder wetting behavior and granule formation mechanism expansion in single-drop granulation

Pre-nucleation in high-shear wet granulation

Dynamic Densification of Wet Granular Materials in Continuous Dense Flows under Gravity

Application of Near-Infrared Spectroscopy Combined with Design of Experiments for Process Development of the Pulsed Spray Fluid Bed Granulation Process

Particle dynamics simulation of wet granulation in a rotating drum

Nucleation regime map for liquid bound granules

The role of adding nanoparticles and surfactant to the enzyme liquid binder in fluidized bed granulation process

Powder agglomeration processes of bulk materials – A state of the art review on different granulation methods and applications

Nucleation, growth and breakage phenomena in agitated wet granulation processes: a review

DEM/CFD Modelling of the Deposition of Dilute Granular Systems in a Vertical Container

DEM simulation OF A single SCREW GRANULATOR: THE EFFECT OF LIQUID BINDER ON GRANULE PROPERTIES

Investigation of mixing homogeneity of binary particle systems in high-shear wet granulator by DEM

Understanding of Wetting Mechanism Toward the Sticky Powder and Machine Learning in Predicting Granule Size Distribution Under High Shear Wet Granulation

Elucidation of granulation mechanisms along the length of the barrel in continuous twin-screw melt granulation

Coupled CFD-PBE Simulation of Nucleation in Fluidized Bed Spray Granulation

Application of Definitive Screening Design to Quantify the Effects of Process Parameters on Key Granule Characteristics and Optimize Operating Parameters in Pulsed-Spray Fluid-Bed Granulation

Investigating the Effects of Mixing Dynamics on Twin-Screw Granule Quality Attributes via the Development of a Physics-Based Process Map

Influence of separation properties and processing strategies on product characteristics in continuous fluidized bed spray granulation

Investigation on the Friction Mechanism and Its Relation to the Force Chains During Powder Compaction

Mechanism of Inter-Tablet Coating Variability: Investigation about the Motion Behavior of Ellipsoidal Tablets in a Pan Coater