Abstract:The external residence time distribution (RTD) curve is extensively used to characterise fluid flow within the single-strand continuous casting tundish. Dead volume fraction determination typically relies on the external RTD curve to reveal macroscopic fluid flow behaviour. Based on the external RTD to effectively assess dead volume fractions and other fluid characteristics under conditions of internal non-uniform flow, an internal RTD was introduced. In a smooth pipe under laminar flow conditions, the dead region occupies 25% of the total volume, which is defined as the space between the pipe wall and a radius of 0.866 R0 (where R0 is the radius of pipe). Under turbulent flow conditions, the dead region only occupies 0.38% of the reactor’s internal volume, spanning from the pipe wall to a radius of 0.00189 R0. The results obtained using the external RTD method are consistent with the theoretical analysis. Experimental trials involving water were conducted to examine the flow of molten steel within a five-strand tundish. Subsequently, an analysis approach employing internal RTD was employed to evaluate fluid mixing within a multi-flow continuous casting tundish. Using the internal RTD method, the analysis revealed that the whole dead zone volume fraction of the intermediate package decreased from 26.9% to 18.9% after the addition of the flow control device. The dead volume fraction can be accurately depicted by utilising the internal mean RTD function. The association between the internal RTD function and the external average RTD can be effectively employed to scrutinise the response curve of the tracer within a system exhibiting uneven flow distribution.

Study of Flow Characteristics of Tundish Based on Digital Image Velocimetry Technique

ESTABLISHMENT OF A FULL SCALE TUNDISH PHYSICAL SIMULATION PLATFORM AND APPLICATION RESEARCH

Hydraulic and Numerical Simulation of Flow Field Characteristics in Induction Heating Continuous Casting Tundish

Flow Characteristics for Two-Strand Tundish in Continuous Slab Casting Using PIV

Design Improvement of Four-Strand Continuous-Casting Tundish Using Physical and Numerical Simulation

Continuous Casting Tundish Dead Volume Study by Physical Modeling and Computational Investigation

Numerical Investigation of Flow Characteristics of Molten Steel in the Tundish with Channel Induction Heating

Simulation of Fluid Flow and Inclusion Removal in Five-Flow T-Type Tundishes with Porous Baffle Walls

Numerical Simulation of Steel Flow Through a One Strand Slab Tundish with Steel Flow Control Devices

Numerical Simulation of Residence Time Distribution (RTD) in Tundish with Channel Type Induction Heating

Numerical Simulation of the Flow Field in an Ultrahigh-Speed Continuous Casting Billet Mold

Study on Parameter Optimization of Diversion Wall in an Eight-Strand Tundish during Continuous Casting of Billet with High Casting Speed

On the Ladle Shroud Design and Mis-alignment Effects on the Fluid Flow in a Metallurgical Tundish- A CFD Model Study

Comparison of Fluid Flow and Tracer Dispersion in Four-Strand Tundish under Fewer Strand Casting and Sudden Blockage of Strand Conditions

Analysis model of internal residence time distribution for fluid flow in a multi-strand continuous casting tundish

Experimental and Simulation Analysis of Physical Water Model through Tracer Injection under Various Baffles and Turbulence Inhibitor Conditions for Developing the Fluid Flow Parameters and Inclusion Removal Rates in Tundish

Numerical Modeling of Transient Flow Characteristics on the Top Surface of a Steel Slab Continuous Casting Strand Using a Large Eddy Simulation Combined with Volume of Fluid Model

Water model study on the new designed tundish in Xingcheng special steel

Molten Steel Flow, Heat Transfer and Inclusion Distribution in a Single-Strand Continuous Casting Tundish with Induction Heating

Numerical Investigation on Motion and Removal of Inclusions in Continuous Casting Tundish with Multiorifice Filter

Numerical simulation on flow and heat transfer in twin roll strip casting and rolling molten pool with side dams vibrating