Abstract:Electrochromic devices are applied extensively to camouflages, smart windows, heat insulation layers, and automobile rearview mirrors, etc. The amorphous WO 3 is a very attractive electrochromic material, whereas it suffers from degradation of optical modulation and reversibility on ion exchange owing to those deep trapped ions with irreversible reaction behavior. Herein, we designed and, by using magnetron sputtering, prepared a composite film with TiO 2 /WO 3 /TiO 2 double heterojunctions, which is capable of eliminating the deep trapped ions by itself under ultraviolet light (UV) assistance. The electrochromic device based on this composite film, after being recovery by short-time UV irradiation, can maintain a high transmission modulation of 94.72% after 7000 cycles of the voltammetry measurement. This feature allows the device to maintain its initial electrochromic performance after prolonged use. Moreover, the double heterojunction structure can reduce colouring time and enormously improve the colouration efficiency (CE) of electrochromic devices. Experimental research shows that when the thickness of the bottom and upper TiO 2 layer of the WO 3 film was 145.5 nm and 97.0 nm, respectively, the CE of electrochromic devices reached a perfectly high value (479.3 cm 2 /C), being much higher than that of WO 3 devices (69.5 cm 2 /C). Functions of the TiO 2 /WO 3 /TiO 2 double heterojunction in electrochromic device were investigated by combining theoretical analysis and experiment validation, and these results provide a general framework for developing and designing superior electrochromic materials and devices.

Enhanced Transmittance Modulation of Ito/Niox/Zro2:H/Wo3/Ito Electrochromic Devices

A study of Electrochromic thin films and Devices by Photothermal Deflection Technique

Improvement of Electrochromic Performance by Embedding ITO Nanocrystals in Amorphous WO3 Film

The Effect of Transparent Conducting Oxide Films on WO3-Based Electrochromic Devices with Conducting Polymer Electrolytes

Enhanced Electrochromic Performance of All-Solid-State Electrochromic Device Based on W-Doped NiO Films

Electrochemical Characteristics of Reconstructed WO3 Electrodes by Embedding ITO Nanocrystals

Effect of independently controllable electrolyte ion content on the performance of all-solid-state electrochromic devices

High-performance electrochromic WO3 film driven by controllable crystalline structure and its all-solid-state device

Optical Characterization of the Coloration Process in Electrochromic Amorphous and Crystalline Wo3 Films by Spectroscopic Ellipsometry

Citric Acid Induced W18O49 Electrochromic Films with Enhanced Optical Modulation

Study of a Novel Electrochromic Device with Crystalline WO3 and Gel Electrolyte

An all-solid-state electrochromic device based on NiO/WO3 complementary structure and solid hybrid polyelectrolyte

Highly transparent TiO2 nanowires as charge-balancing layers for assembling electrochromic devices: effect of thickness on electrode potentials and electrochromic performance

Improved Electrochromic Performance of WO3 Films with Size Controlled Nanorods

Construction of TiO2/WO3/TiO2 double heterojunction films for excellent electrochromic performance

The effect of humidity control on all-thin-film electrochromic devices and their superior sustainable recoverability

Electrochromic modulation of near-infrared light by WO3 films deposited on silver nanowire substrates

Optimization of photoelectric properties of transparent conductive B and Ga co-doped ZnO films for electrochromic applications

Electrochemical Characteristics of Reconstructed WO 3 Electrodes by Embedding ITO Nanocrystals

Enhanced electrochromism from non-stoichiometric electrodeposited tungsten oxide thin films

Photoelectrochemical performance of a UV-cured all-solid-state complementary ITO/WO3/Ta2O5/electrolyte/NiO/ITO electrochromic device deposited by ion-beam assisted electron-beam evaporation