Abstract:To realize the long-term stability of the WO3-based electrochromic devices (ECDs), the ECDs based on CoS catalytic counter electrodes (CCEs) and a transparent electrolyte containing tetramethylthiourea/tetramethylformaminium disulfide (TMTU/TMFDS2+) redox couple are newly designed. The incorporation of CoS CCEs effectively enhances the reactivity of TMTU/TMFDS2+ redox couple and the electrochromic performance of ECDs. Electrocatalytic activities of the CoS films were systematically investigated by cyclic voltammetry, electrochemical impedance spectroscopy, and Tafel polarization measurements. Among CoS CCEs with different electrodeposition times, CoS-15 (electrodeposition for 15 times) electrode exhibits excellent catalytic activity for TMTU/TMFDS2+ redox couple, and simultaneously maintains high transmittance (similar to 80%). The assembled WTC-15 (WO3//TMTU/TMEDS2+//CoS-15) device can achieve low driven voltage (-1.2 V for coloring and 1.0 V for bleaching), rapid switching speed (7.3 s for coloring and 5.9 s for bleaching), and high coloration efficiency (71.2 cm(2) C-1). Additionally, the device shows a high transmittance contrast of 67.8% at 648 nm and can be stably switched for >100,000 cycles with <5% contrast attenuation. To our best knowledge, this is the best cycling performance for hybrid WO3-based ECDs ever reported. Meanwhile, this research expands the list of potential counter electrodes (CoS, NiS, and MoS2) in ECDs, which can solve the problem of charge mismatch between electrodes. Moreover, it is the first time that the electrocatalytic ability of transition-metal sulfides on TMTU/TMFDS2+ redox couple has been reported.

Study of a Novel Electrochromic Device with Crystalline WO3 and Gel Electrolyte

The Effect of Transparent Conducting Oxide Films on WO3-Based Electrochromic Devices with Conducting Polymer Electrolytes

Electrochemical investigation of electrochromic device based on WO 3 and Ti doped V 2 O 5 films by using electrolyte containing ferrocene

Optical Characterization of the Coloration Process in Electrochromic Amorphous and Crystalline Wo3 Films by Spectroscopic Ellipsometry

Robust non-complementary electrochromic device based on WO<sub>3</sub> film and CoS catalytic counter electrode with TMTU/TMFDS<SUP>2+</SUP> redox couple

Elaboration and study of a PANI/PAMPS/WO3 all solid-state electrochromic device

High Contrast Ratio and Long Lifetime Polymer Electrochromic Devices (Ecds)

Preparation and Performances of All-Solid-state Variable Infrared Emittance Devices Based on Amorphous and Crystalline WO3 Electrochromic Thin Films

Improved electrochromic devices with an inorganic solid electrolyte protective layer

Preparation of WO3 gel electrochromic device by simple two-step method

Effect of independently controllable electrolyte ion content on the performance of all-solid-state electrochromic devices

An all-solid-state bistable electrochromic device based on the amorphous WO 3-x nanostructured film

Enhanced electrochromism from non-stoichiometric electrodeposited tungsten oxide thin films

Tungsten Disulfide Wrapped WO3 Based Thin Film Transparent Electrode Material for Electrochromic Device Application

Preparation and Properties of All-Solid-State Inorganic Thin Film Glass/Ito/Wo3/Linbo3/Niox/Ito Electrochromic Device

High-performance electrochromic WO3 film driven by controllable crystalline structure and its all-solid-state device

Tungsten Oxide Nanofibers for Electrochromic Device Application

Extraordinarily fast response all-solid-state electrochromic devices

Realisation of Solid-State Electrochromic Devices Based on Gel Electrolyte

Electrochromic performance and potential stability of sputtered V2O5 film for a complementary inorganic all-solid-state electrochromic device

Influence of cycling temperature on the electrochromic properties of WO3//NiO devices built with various thicknesses