Abstract:Two kinds of tin oxide (SnO2)/titanium oxide (TiO2) composite materials have been synthesized and applied as electrodes in dye-sensitized solar cells (DSSCs) with high performance. The porous SnO2/TiO2 material (PSTM) consisting of SnO2 nanosheets cluster and TiO2 nanoparticles (P25) shows a superior dye adsorption ability due to its large specific surface area (151.1 m(2) g(-1)). The PSTM based cell exhibits the slowest electron recombination rate among the cells tested from electrochemical impedance spectra measurements, and obtains final power conversion efficiency (PCE) up to 6.80%. Another novel structure of SnO2@TiO2 hollow sphere (STHS) prepared via a facile water bath process is designed to improve the light utilization efficiency with its excellent light scattering ability. Though the charge recombination resistance of STHS (25.6 Omega) is smaller than that of P25 (30.6 Omega), the PCE of the DSSCs based on the former is 5.82%, showing over 9.2% increment than the latter (5.33%). This can be mainly ascribed to the enhanced light-harvesting ability and charge collection efficiency of the macroporous hollow sphere structure, both of which contribute to a higher short current density and hence for the better photovoltaic performance. Furthermore, we demonstrate a bilayered film of PSTM (charge conduction layer) and STHS (light scattering layer) as photoanode aiming to further improve the efficiency of DSSC by engineered integration of different promising materials. The results indicate that the PSTM+STHS based cell shows an obvious 14.6% increase of PCE (7.79% with a J(sc) of 17.49 mA cm(-2), V-oc of 0.73 V and FF of 0.61) as compared to the single layered PSTM photoelectrode with the same thickness of similar to 6.9 mm, providing the specific evidence for taking full advantages of the superior dye adsorption, fast charge collection as well as strong light harvesting simultaneously. Fundamentally, this study not only provides a scheme for the guidance of effective materials surface and interfacial modification, but also highlights the significance of the ideal photoanode configuration for high-efficiency solar cells application. (C) 2015 Published by Elsevier Ltd.

A Bi-layer Composite Film Based on TiO 2 Hollow Spheres, P25, and Multi-walled Carbon Nanotubes for Efficient Photoanode of Dye-sensitized Solar Cell

Hierarchical Submicroflowers Assembled from Ultrathin Anatase TiO2 Nanosheets As Light Scattering Centers in TiO2 Photoanodes for Dye-Sensitized Solar Cells

Tripartite Layered Photoanode from Hierarchical Anatase TiO2 Urchin-Like Spheres and P25: A Candidate for Enhanced Efficiency Dye Sensitized Solar Cells

Bi-layer Photoanode Films of Hierarchical Carbon-Doped Brookite-Rutile TiO2 Composite and Anatase TiO2 Beads for Efficient Dye-Sensitized Solar Cells

The TiO 2 Hierarchical Structure with Nanosheet Spheres for Improved Photoelectric Performance in Dye-Sensitized Solar Cells

Branched Hierarchical Titanium Dioxide Nanoflower on Carbon Nanofiber with Efficient Scattering Layer for High Performance Dye-Sensitized Solar Cells

Rational Design Of A Tripartite-Layered Tio2 Photoelectrode: A Candidate For Enhanced Power Conversion Efficiency In Dye Sensitized Solar Cells

A Double Layered Photoanode Made of Highly Crystalline Tio2 Nanooctahedra and Agglutinated Mesoporous Tio2 Microspheres for High Efficiency Dye Sensitized Solar Cells

Enhanced Photovoltaic Properties of Dye-Sensitized Solar Cell Based on Ultrathin 2D TiO2 Nanostructures

Dye-Sensitized Solar Cells Based On A Double Layered Tio2 Photoanode Consisting Of Hierarchical Nanowire Arrays And Nanoparticles With Greatly Improved Photovoltaic Performance

Bilayered Photoanode from Rutile Tio2 Nanorods and Hierarchical Anatase Tio2 Hollow Spheres: A Candidate for Enhanced Efficiency Dye Sensitized Solar Cells

Improving The Photovoltaic Performance Of A Dye-Sensitized Solar Cell By Using A Hierarchical Titania Bur-Like Microspheres Double Layered Photoanode

Interfacial engineering and configuration design of bilayered photoanode consisting of macroporous tin dioxide/titanium dioxide for high performance dye-sensitized solar cells

TiO2 Nanoparticle/nanotube Multilayer Composite Film As Photoanode Applied in Dye Sensitised Solar Cells

Double‐Layer Structure Photoanode with TiO2 Nanotubes and Nanoparticles for Dye‐Sensitized Solar Cells

High-efficiency Dye-Sensitized Solar Cells Based on Bilayer Structured Photoanode Consisting of Carbon Nanofiber/tio2 Composites and Ag@TiO2 Core-Shell Spheres

ZnO/Ti<sub>3</sub>C<sub>2</sub>T<sub> x </sub> composite photoanodes for efficient dye-sensitized solar cells

A double layered TiO2 photoanode consisting of hierarchical flowers and nanoparticles for high-efficiency dye-sensitized solar cells.

Enhanced the performance of dye-sensitized solar cells with a novel photoanode using TiO2 nanoflower clusters and nanoparticles

Enhanced conversion efficiency in dye-sensitized solar cells based on bilayered nano-composite photoanode film consisting of TiO2 nanoparticles and nanofibers.

Bilayered Photoanode Consisting of Zinc Oxide Hollow Spheres and Urchin-Like Titanium Dioxide Microspheres Enables Fast Electron Transport and Efficient Light-Harvesting for Improved-Performance Dye-Sensitized Solar Cells