Abstract:Dye-sensitized solar cell (DSSC) is one of the most promising alternatives to the conventional p-n junction photovoltaic device. Here, we have explored the morphology and structure variation and the accompanying solar cell performance change of two different TiO2 beads-based photoanodes made from the same precursor. The first was synthesized hydrothermally at acidic condition whereas the second was synthesized solvothermally at slightly basic condition. The first material, referred as Bead-A with an average particle size of similar to 2.0 mu m consists of rutile and brookite TiO2 phases while the second material, Bead-B, with smaller diameter of similar to 500 nm consists solely of anatase TiO2 phase. The pertaining formation mechanisms for both materials are explored. The performances of DSSCs based on Bead-A-P25 and Bead-B-P25 bi-layer photoanodes are higher than that based on pure P25. Cell based on Bead-B showed slightly better DSSC performance than Bead-A. It becomes apparent that Bead-A is advantageous in terms of fast electron transport due to its larger particle size and the presence of 1D rutile nanorods in addition to the carbon doping. Bead-B, on the other hand, gives advantages of superior light scattering properties and high surface area for dye loading. We further improved the cell performance by combining the advantages from both materials via optimized layer arrangement. By placing larger Bead-A particles on top of the smaller Bead-B particles, the top layer suppresses carrier recombination and confines the incident light within the photoanode, essentially enhancing charge harvest and collection efficiency. The performance of DSSC based on bi-layer Bead-A and Bead-B photoanode is superior to their counterpart based on bead-P25 bi-layer films. The cell operated using this bi-layer photoanode demonstrated short-circuit current density (J(sc)) of 15.67 mA cm(-2), open circuit voltage(V-OC) of 721 mV and power conversion efficiency of 7.24%. (C) 2016 Elsevier Ltd. All rights reserved.

High-efficiency Dye-Sensitized Solar Cells Based on Bilayer Structured Photoanode Consisting of Carbon Nanofiber/tio2 Composites and Ag@TiO2 Core-Shell Spheres

Enhanced Performance of Dye-Sensitized Solar Cells with Layered Structure Graphitic Carbon Nitride and Reduced Graphene Oxide Modified TiO2 Photoanodes

Photo-assisted Deposition of Ag Nanoparticles on Branched TiO2 Nanorod Arrays for Dye-Sensitized Solar Cells with Enhanced Efficiency

Hierarchical Submicroflowers Assembled from Ultrathin Anatase TiO2 Nanosheets As Light Scattering Centers in TiO2 Photoanodes for Dye-Sensitized Solar Cells

Functions of Self-Assembled Ultrafine TiO2 Nanocrystals for High Efficient Dye-Sensitized Solar Cells

Construction of Efficient Photoanodes for Dye Sensitized Solar Cells: TiO2 Films with a Gradient Content of Graphene

A Double Layered Photoanode Made of Highly Crystalline Tio2 Nanooctahedra and Agglutinated Mesoporous Tio2 Microspheres for High Efficiency Dye Sensitized Solar Cells

Bi-layer Photoanode Films of Hierarchical Carbon-Doped Brookite-Rutile TiO2 Composite and Anatase TiO2 Beads for Efficient Dye-Sensitized Solar Cells

DSSC using natural dye sensitized and Ag/CdS/TiO 2 composite structured light anode

Enhanced Light Scattering and Photovoltaic Performance for Dye-Sensitized Solar Cells by Embedding Submicron SiO2/TiO2 Core/shell Particles in Photoanode

Effect of modified titanium dioxide photoanode and agarose gel electrolyte on electrochemical studies of dye-sensitized solar cell

DSSCs Using a Nanoparticle/Nanorod Composite TiO<sub>2</sub> Film As a Photoanode

Rational Design Of A Tripartite-Layered Tio2 Photoelectrode: A Candidate For Enhanced Power Conversion Efficiency In Dye Sensitized Solar Cells

Performance Improvement of Dye-Sensitized Solar Cell by Optimizing TiO<sub>2</sub>-Photoanode Structure

Multifunctional Composite Photoanode Containing a TiO 2 Microarchitecture with Near-Infrared Upconversion Nanoparticles for Dye-Sensitized Solar Cells

Improvement in light harvesting in a dye sensitized solar cell based on cascade charge transfer

Hierarchically structured photoanode with enhanced charge collection and light harvesting abilities for fiber-shaped dye-sensitized solar cells

Ag nanoparticle-decorated SiO2@TiO2 hierarchical microspheres improve the efficiency of dye-sensitized solar cells

Photovoltaic Performance of Dye-Sensitized Solar Cell by Modification of Photoanode With PbTiO 3 –ZnFe 2 O 4 /TiO 2 Nanofibers

Multifunctional conjugated molecules combined with electrospun CuCoP/carbon nanofibers as a modifier of Pt counter electrode for dye-sensitized solar cells

Light absorption enhancement in dye-sensitized solar cells using thin nanostructured photoelectrodes