Abstract:This study presents a novel roller piston pump,in which a cam guide-roller type rolling support is adopted to replace the sliding pair support of the swash plate-slipper pair to achieve the oil suction and discharge of the piston cavity.In addition,the shaft distribution is used to replace the original valve plate distribution and the driving shaft is used as the distribution shaft to remove the valve plate structure,which greatly simplifies the design of the axial piston pump.Such a configuration largely reduces the number of sliding friction pairs of the pump,and avoids the influence of the sliding friction pair on it under high-speed and variable-speed conditions.Firstly,mathematical models of the mechanical and volumetric efficiencies of the roller pump are deduced respectively through force analysis and the compressibility equation.Based on the numerical simulation of MATLAB and AMESim,the effects of load pressure and rotational speed on mechanical and volumetric efficiencies are studied respectively,and it is verified that the roller pump has no structural flow pulsation.The prototype pump is then designed and built,along with a special test rig.The outlet pressure,outlet flow,and torque of the pump under different load pressures and rotational speeds are measured,and the mechanical and volumetric efficiencies of the prototype pump under various load pressures and rotational speeds are obtained.The experimental results are in good agreement with the simulated analysis.When the load pressure is 8 MPa and the speed is 5000 r/min,the mechanical and the volumetric efficiencies are 85.5%and 96.8%,respectively.When the speed is increased to 10000 r/min,the mechanical and the volumetric efficiencies are 66.7%and 95.6%,respectively.The experimental results show that the proposed roller piston pump has excellent efficiency under wide-speed and high-speed conditions and can be a potential solution as a fuel pump in aerospace fuel systems.

Design and Theoretical Analysis of a Sliding Valve Distribution Radial Piston Pump

New Distributing Mechanism for High Speed Single-Piston Axial Piston Pump

Design and Experimental Study of Radial Piston Pump With Valve Plate Distribution

Double-rotator and valve plate distribution radial piston pump

The Design for the Slipper Pair of the Axial Piston Pump Used as a High Pressure Pump in Seawater Desalination

Design and Experimental Studies of A Novel Double-Row Radial Piston Pump

Design and experimental validation of a valve-distributed water radial piston pump

A New Design Method for the Transition Region of the Valve Plate for an Axial Piston Pump

Simulation Research on Distribution Method of Axial Piston Pump Utilizing Pressure Equalization Mechanism

Theoretical and Experimental Investigation on the Efficiency of a Novel Roller Piston Pump

Analysis and Optimization on U-shaped Damping Groove for Flow Ripple Reduction of Fixed Displacement Axial-Piston Pump

Theoretical and Simulation Investigations on Flow Ripple Reduction of Axial Piston Pumps Using Nonuniform Distribution of Pistons

Multi-objective Drive Forward Design with Damping Orifice and Groove for Axial Piston Pump

58812 ANALYSIS OF THE PISTON/CYLINDER PAIR OF AXIAL PISTON PUMP BASED ON VIRTUAL PROTOTYPE(Fluid-Structure Interaction in MBS)

Investigation on the Radial Micro-Motion about Piston of Axial Piston Pump

Research on Multi-Objective Optimization of Low Pulsation Unloading Damping Groove of Axial Piston Pump

Study on Flow Characteristics and Flow Ripple Reduction Schemes of Spool Valves Distributed Radial Piston Pump

Analysis of the Flow Dynamics Characteristics of an Axial Piston Pump Based on the Computational Fluid Dynamics Method

Novel Three-Piston Pump Design for a Slipper Test Rig

Research on the Volumetric Efficiency of a Novel Stacked Roller 2D Piston Pump

Structural Design of a Cross Wobble Plate Driving Axial Piston Pump Based on ADAMS and AMESim Co-simulation