Abstract:A dual-machine horizontal automatic drilling and riveting system for aircraft panel assembly is presented in this paper. Two cooperative machines are adopted, like a two-robot system, to achieve the unobstructed workspace, so it can be applied in an efficient assembly line. Different from the current deign wisdom to ensuring the riveting accuracy by increasing the machine stiffness, which detrimentally results in higher masses to be moved and sophisticated reinforcements being used, this paper proposes a disturbance observer (DOB) based design method of riveting force controller for adaptive riveting with high accuracy driven heads, reducing the dependence of automatic riveting on high stiffness of machine. This method simplifies the force-induced deformation error compensation problem to a force control problem, which has rarely been studied before in literature. The separate layout leads to weak machine stiffness in the whole workspace and the stiffness varies with machine pose greatly, which makes it difficult to establish an accurate force-induced deformation error compensation model. To make the riveting machine precisely generate the desired force under such stiffness-varying conditions, a robust control algorithm is designed: the disturbance observer is introduced to address the robust stability against model parameter variance caused by the change of system stiffness with pose, and the feedforward controller can achieve the high-bandwidth force control to ensure the riveting efficiency. The model identification experiments are carried out for different machine stiffness. Validation riveting experiments have been conducted to verify the proposed controller on the dual-machine riveting system. The results show that, compared with previous displacement control, the proposed force controller can ensure the consistency of driven heads through accurate force control.

A Servo-Motor Driven Active Blank Holder Control System for Deep Drawing Process

Hydraulic Systems Control Based on the Characteristics of Major-Motion Mechanism for an Open-Die Forging Manipulator

Design and Control of an Electrohydraulic Soft Actuator System for Robotic Grippers

Electromechanical Model-Based Adaptive Control of Multilayered Dielectric Elastomer Bending Actuator

Design of DOB-based Riveting Force Controller for Dual-Machine Horizontal Drilling and Riveting System

Artificial muscle driven soft hydraulic robot: electromechanical actuation and simplified modeling

Research On Pneumatic-Servo Calligraphy Robot

Blank Holder Force Control of Hydraulic Cushion with Soft Relief Fuzzy PID Controller

Model-Based Nonlinear Control of the Dielectric Elastomer Actuator with High Robustness and Precision

Velocity Control of the Horizontal Buffer System for Heavy Load Forging Manipulator

Analysis and Engineering Realization of Servo Motor Braking of Envelope Machine Based on Balanced Impact

A novel main drive system for the servo press: Combination of integrated motor and symmetrically toggle booster mechanism

Design and Adaptive Terminal Sliding Mode Control of a Fast Tool Servo System for Diamond Machining of Freeform Surfaces

Hydraulic System Design and Simulation of the Forging Manipulator

C-5 APPLYING A SERVO PRESS ON DRAWING PROCESS WITH CONSIDERING FORMABILITY LIMITS(Session: Forming I)

Design And Modeling Of A Hydraulic Soft Actuator With Three Degrees Of Freedom

Design and Control of the 3 Axes Pneumatic Servo Micromanipulator for the Biological Technology

Hardware Design of Electro-Mechanical Actuator System

Design of Hybrid-Driven Servo Press Mechanism

Development of forming process for deep drawing of square cup with optimized blank holder pressure

Motion profile optimization of servo press in deep drawing process of SUS 304 stainless steel sheets