Abstract:Multiple degrees-of-freedom (multi-DOF) hydraulic manipulators are usually recognized as hard-to-control systems to achieve dynamic trajectory tracking because of strong nonlinearities, uncertainties, and complex couplings within the dynamics. In practice, when the end-effector of the multi-DOF hydraulic manipulator is tracking a given trajectory continuously, some joints may experience frequent stop-and-go or low-speed motions due to its kinematics. In such situations, dynamic friction becomes one of the main factors that affect the control performance. Inadequate compensation for the dynamic friction can result in undesired crawling or oscillatory behaviors of the manipulator. However, it is challenging to make effective compensation of the dynamic friction in control design due to its complicated and nonlinear properties. In this article, motion control of a multi-DOF hydraulic manipulator with extra consideration on the nonlinear friction for dynamic trajectory tracking is proposed. First, to make a more precise compensation of the nonlinear friction force, an improved LuGre model ensuring continuity and differentiability is developed, along with the method for obtaining nominal values of internal friction state based on desired trajectories. Then, a model-based adaptive robust motion controller is developed for the multi-DOF hydraulic manipulator. The nonlinearities and uncertainties of the high-order dynamics are well addressed in the closed-loop system, and the transient and asymptotic tracking performance can be guaranteed in theory. Finally, experimental validation was conducted, and the comparison with existing methods showed the improved tracking performance.

Velocity Control of the Horizontal Buffer System for Heavy Load Forging Manipulator

Hydraulic Systems Control Based on the Characteristics of Major-Motion Mechanism for an Open-Die Forging Manipulator

Vertical Load Analysis of the Lifting Systems for Forging Manipulator During the Forging Process

Adaptive Robust Motion Control of a Fast Forging Hydraulic Press Considering the Nonlinear Uncertain Accumulator Model.

Hydraulic System Design and Simulation of the Forging Manipulator

Design, Modeling, and Pressure Control of a 300-Kw-class Hydraulic Pump/motor Loading System with Energy Regeneration

Paralleling Hydraulic Control of Variable Frequency Motor and Valve for the Swing Mechanism of Segment Erector

Velocity-tracking Control of the Variable-speed Controlled Hydraulic System: Using Compound Algorithm of PD & Feedforward-feedback Control

Active Damping Control of the Large-scale Flexible Hydraulic Manipulators with Independent Metering System

A Flow-Limited Rate Control Scheme for the Master–Slave Hydraulic Manipulator

Advanced Motion Control of Hydraulic Manipulator with Precise Compensation of Dynamic Friction

An Adaptive Robust Controller for Hydraulic Robotic Manipulators with a Flow-Mapping Compensator

Robust nonlinear controller design for improving the working rate of forging manipulators

Hierarchical Decoupling Controller with Cylinder Separated Model of Hydraulic Manipulators for Contact Force/Motion Control

Active Damping Control of the Large-scaleFlexible Hydraulic Manipulators Withindependent Metering System

High Precision Energy Saving Motion Control Of Hydraulic Cylinder Based On Integration Of Valves And Pump

Pd Control with Gravity Compensation for Hydraulic 6-Dof Parallel Manipulator

Vibration Control for Active Magnetic Bearing High-Speed Flywheel Rotor System with Modal Separation and Velocity Estimation Strategy

Comparison of Acceleration Control and Pressure Feedback for Active Damping Improvement of Hydraulic Manipulators

Design and Tracking Control of an Electro-Hydrostatic Actuator for a Disc Cutter Replacement Manipulator

Digital pressure compensation methop for anti disturbance in electrohydraulic proportional velocity control system