Abstract:Due to the varying cooling conditions within different internal areas, there is a notable disparity in the cooling rates. This discrepancy has resulted in severe elemental segregation and the formation of coarse M C phases in the Φ508 mm GH4151 superalloy ingot, which has undergone triple smelting (VIM + ESR + VAR). These factors have had detrimental effects on the stability of the alloy structure. The solidification segregation, microstructure evolution, and secondary phase precipitation behaviors of GH4151 alloy under a wide cooling rate range were studied through Differential Scanning Calorimetry (DSC), in situ observations with High-Temperature Confocal Laser Scanning Microscopy (HT-CLSM), Directional Solidification (DS), and Computational Fluid Dynamics (CFD). The results show that the solidification path of GH4151 can be summarized as (1)L → γ (1334.6 °C); (2) L → γ + M C (1281 °C and 1258 °C); (3)L → γ + M C + γ/γ' + Laves (1152 °C); (4)L → γ + M C + γ/γ' + Laves+ M 2 B (1084 °C), where MC, γ/γ', Laves, and M 2 B are the main precipitate types during the solidification process. Mo, Nb, and Ti are the main dendritic segregation elements. Due to the reverse diffusion of solute elements under low cooling rates, the element segregation presents an increasing and then decreasing trend with the increase in cooling rate. The maximum segregation rate occurs at 24 °C/min. The cooling rate dramatically influences the morphology of the solid-liquid interface. The prediction formulas for PDAS and SDAS of GH4151 alloy under slow cooling conditions are λ 1 = 1137.1· V -0.25 · G -0.5 and λ 2 = 153.6· V c -0.32 respectively. Similarly, with the increase of solidification speed, the size of γ' phase, Laves phase, γ/γ' phase, and M C gradually decreases. When the cooling rate exceeds 12 °C/min, the large blocky M C phase evolves into elongated bars. The cooling rate from the center to the surface of the Φ508 mm VAR ingot ranges from 5 to 20 °C/min, with the standout being that the fastest cooling rate at the edge is about 48 °C/min.

Influence of Processing Parameters on the Solidification Behavior of Single-Crystal Cmsx-4 Superalloy

Effect of Directional Solidification Methods on Solid Solution Window in Ni-based Single-Crystal Superalloy

Influence of Cooling Rate on the Formation of Bimodal Microstructures in Nickel-Base Superalloys During Continuous Two-Step Aging

Effect of the Cooling Rate on the Microstructure of Directionally Solidified Casting (CMSX-4 Ni Superalloy)

Effect of solidification parameters on the microstructures of a single crystal Ni-based superalloy AM3

Influence of Withdrawal Rate on Last Stage Solidification Path of a Mo-rich Ni3Al Based Single Crystal Superalloy

Numerical Simulation of Temperature Field and Grain Texture During Casting Single Crystal Superalloy DD403 with Liquid Metal Cooling

Multiphase-field and experimental study of solidification behavior in a nickel-based single crystal superalloy

Solidification Behavior of Ni-based Superalloy at Different Cooling Rates

Photoemission Studies of High-Tc Superconductors: The Superconducting Gap

Solidification Microstructure in a Supercooled Binary Alloy

Effect of Solidification Rate on Mc-Type Carbide Morphology in Single Crystal Ni-Base Superalloy Am3

Simulation and Experimental Study on the Directional Solidification Process of a Single Crystal Superalloy Plate Casting

Effect of Sulfur on Microstructures and Solidification Characteristics of a Nickel-Base Single Crystal Superalloy

The Effect of Cooling Rates from Temperatures above the Γ′ Solvus on the Microstructure of a New Nickel-Based Powder Metallurgy Superalloy

Influence of directional solidification variables on the microstructure and crystal orientation of AM3 under high thermal gradient

Multi-scale Modeling of Liquid-Metal Cooling Directional Solidification and Solidification Behavior of Nickel-Based Superalloy Casting

Microstructure evolution and solidification behaviour of Nb–16Si–22Ti–2Cr–2Al–6Hf alloy processed by directional solidification

Microstructural Investigations of Ni-Based Superalloys by Directional Solidification Quenching Technique

The Effect of Withdrawal Rate on Crystal Structure Perfection, Microstructure and Creep Resistance of Single Crystal Castings Made of CMSX-4 Nickel-Based Superalloy

Effect of the cooling rates on the microstructure and segregation characteristics in directionally solidified GH4151 superalloy