Abstract:Ni-based single-crystal superalloys are normally prepared by directional solidification. Due to different solidification sequences, Ni-based single-crystal superalloys exhibit a typical dendritic arm structure, and the element segregation in the dendritic arm can affect the high temperature mechanical properties of the alloy. Solid solution treatment has a certain extent to reduce the inter-dendritic and dendritic arm between the concentrations of the elements, thereby changing the alloy micro-nano view parameters to improve the high temperature mechanical properties of the alloy. In this study, nanoindentation experiments were carried out on the inter-dendritic and dendritic arm of the cast and solid solution samples. The micromechanical parameters were calculated. The amounts of changes in elemental concentration were discussed with the results of the energy dispersive spectroscopy and electron probe microanalysis, so as to analyse the relationship between the micromechanical parameters and the changes in elemental concentration. The results show that solid solution treatment has a significant impact on the elastic modulus, with an increase of 114.7% of the inter-dendritic region and an increase of 142.7% of the dendritic arm. However, solid solution treatment has little effect on the hardness, with no significant change in the hardness of the inter-dendritic region and an increase of 43.86% of the dendritic arm. Solid solution treatment has a more significant effect on improving the segregation behavior of Al and Co elements, with the segregation coefficients of Al and Co elements in the inter-dendritic region decreasing and increasing by 36% and 19%, and the segregation coefficients of Al and Co elements in the dendritic arm region decreasing and increasing by 29% and 34%.

Effect of Sulfur on Microstructures and Solidification Characteristics of a Nickel-Base Single Crystal Superalloy

Effect of Directional Solidification Methods on Solid Solution Window in Ni-based Single-Crystal Superalloy

Effect of Sulfur on Hot Ductility of Ni-Cr-W-Al Superalloy

Effect of Sulfur on the Hot Plasticity of GH625 Superalloy

Multiphase-field and experimental study of solidification behavior in a nickel-based single crystal superalloy

Effect of trace sulfur on the hot corrosion resistance of Ni-base single crystal superalloy

Processing, Microstructures and Mechanical Properties of a Ni-Based Single Crystal Superalloy

Effect of carbon addition on microstructure and mechanical properties of a typical hard-to-deform Ni-base superalloy

Effect of carbon on the solidification microstructure of single crystal Ni-based superalloy AM3

Experimental Study on the Micro-Mechanical Parameters of Ni-based Single-Crystal Superalloys Using Nanoindentation and Element Distribution Analysis

Effects of Cobalt on Solidification Characteristics and As-Cast Microstructure of an Advanced Nickel-Based Single Crystal Superalloys

Eutectic Formation During Solidification of Ni-Based Single-Crystal Superalloys with Additional Carbon

Influence of sulfur addition on the glass formation, phase transformation and mechanical properties of Cu50Zr50 alloy

Microstructural Evolution of Wrought-Nickel-Based Superalloy GH4169

Microsegregation Behavior of Alloying Elements in Single-Crystal Nickel-Based Superalloys with Emphasis on Dendritic Structure

Effect of Melt Superheat Treatment on Solidification Behavior and Microstructure of New Ni–Co Based Superalloy

Effect of the Cooling Rate on the Microstructure of Directionally Solidified Casting (CMSX-4 Ni Superalloy)

The Effect of Cooling Rates from Temperatures above the Γ′ Solvus on the Microstructure of a New Nickel-Based Powder Metallurgy Superalloy

Effects of Cooling Rate on the Solidification and Microstructure of Nickel-Based Superalloy GTD222

Influence of Processing Parameters on the Solidification Behavior of Single-Crystal Cmsx-4 Superalloy

Microstructural Investigations of Ni-Based Superalloys by Directional Solidification Quenching Technique