Abstract:Theoretical analysis and field tests on pile-base post grouting pile were carried out to study the generation and dissipation of residual stress and their effects on bearing behaviour of pile.Generation and dissipation of residual stress were observed for a long time by means of embedding earth pressure cells at pile tip and reinforcement stress gauges at pile shaft.The observation results show that during pile-base post grouting,high pressure grout produces a bidirectional force inside the confined spaces of pile tip,where the pile tip and pile tip soil are preloaded.Because of the bidirectional force,pile tip soil is preloaded and there will be negative friction along the bottom of pile shaft.However,within 24 hours after grouting,the permeation and pressure filtration of injected grouts will lead to the decrease of this bidirectional force and the dissipation of residual stress.24 hours later,the residual stress remains at a constant value.So before loading test,there are still negative friction along the bottom of pile shaft and the pile tip soil is preloaded.By preloading the pile tip soil and not changing the value of side friction resistance,the existence of residual stress can improve tip resistance;and thereby enhances the ultimate bearing capacity of post grouting pile as well.If the residual stress was neglected and the reading of reinforcement stress gauges was taken as zero reading assumption,the side friction resistance of pile will be overestimated and its tip resistance will be underestimated.

Complete Load Transfer Behavior of Base-Grouted Bored Piles

ANALYSIS OF RESIDUAL STRESS ON PILE-BASE POST GROUTING PILE

A Destructive Field Study on the Behavior of Pile under Ten

Model Tests on the Bearing Capacity of Precast Open-Ended Micro Pipe Piles in Soft Soil

Field Behavior of Pre-Bored Grouted Planted Nodular Pile Embedded in Deep Clayey Soil

Model tests on the bearing capacity of precast oxen-ended micro pipe plies in sort soil

Soil-pile interaction on an instrumented pile under cyclic axial loads in sand

Field Tests of Offshore Driven Piles Subjected to Lateral Monotonic and Cyclic Loads in Soft Clay

Field study on the behavior of pre-bored grouted planted pile with enlarged grout base

Model Test on Load Transfer Mechanism of a Static Drill Rooted Nodular Pile

Study on Bearing Behavior of Pure-friction Long Pile in Soft Clay

Field Tests on Behavior of Destructive and Non-Destructive Base-Grouting Piles under Compression

Testing and Modeling the Behavior of Pre-Bored Grouting Planted Piles under Compression and Tension

Model tests comparing the behavior of pre-bored grouted planted piles and a wished-in-place concrete pile in dense sand

Field Tests on Behavior of Pre-Bored Grouted Planted Pile and Bored Pile Embedded in Deep Soft Clay

Field Tests on Behavior of Pre bored Grouted Planted Pile in Soft Soil Area with Existing Pile Foundation

Vertical Bearing Capacity of Large-Diameter Bored Pile

A Simplified Nonlinear Calculation Method to Describe the Settlement of Pre-Bored Grouting Planted Nodular Piles

Analysis of Axial Load-Transfer of Large-Diameter Cast-in-situ Tubular Pile

A Destructive Field Study on the Behavior of Piles under Tension and Compression

Investigation into Skin Friction of Bored Pile Including Influence of Soil Strength at Pile Base