Abstract:In recent years, the steel corrugated shear walls (SCSWs) are widely used in building structures to serve as lateral force resistant members. For some practical engineering applications that the width of the infilled SCSWs in frame structure is much greater than its height, it is common to add vertical stiffening systems to the SCSWs, thus forming the stiffened SCSWs (SSCSWs), and the stiffening system is composed of a pair of vertical stiffeners installed on both sides of the corrugated plate and the connecting high-strength bolts. In this paper, the shear resistant behavior of the SSCSWs is investigated via FE analyses considering both the geometrical and material nonlinearities, and over 300 models are analyzed through elastoplastic numerical process. The comparison of the shear resistant behavior of SSCSWs with different stiffening rigidities is performed, which indicates that the stiffening system can effectively restrain the out-of-plane displacements of the corrugated wall, and can improve both shear resistance and ductility of the SSCSWs. Then a transition rigidity ratio of the stiffening system is proposed to reflect the critical value of the stiffening rigidity that the out-of-plane displacements of the corrugated plate are fully restrained at the bolted locations. Correspondingly, curve fitted formula of the transition rigidity ratio is provided to enable a conservative prediction. Finally, shear buckling formulas are fitted to reveal the relationship between the reduction factor and the normalized aspect ratio, and they are validated to be able to conservatively predict the ultimate shear stress of SSCSWs. Accordingly, some design recommendations are presented, which could provide valuable references for practical design of SSCSWs.

Theoretical and Experimental Studies on In-Plane Stiffness of Container Structure with Holes

FEM and Experimental Study on Mechanical Property of Integrated Container Building

STIFFENER STIFFNESS AND ELASTIC BUCKLING STRESS OF STEEL PLATE SHEAR WALL

Experimental and numerical study on compressive behavior of welded hollow spherical joints with external stiffeners

Experimental study and numerical simulation of seismic performance of stiffened thin steel plate shear walls considering the effect of vertical load on frame column

Design Approach of Stiffeners in Extended End Plate Connections and Finite Element Analysis

Demand on Stiffeners in Stiffened Extended End-Plate Connections

Experimental and Numerical Study on Failure Behaviors of Composite Grid Stiffeners under Tensile and Flexural Loading

Theoretical and Experimental Study on Load-Carrying Capacity of Combined Members Consisted of Inner and Sleeved Tubes

Shear Resistance of Stiffened Steel Corrugated Shear Walls

Ultimate Strength of Typical Stiffened Panels in Container Ships with Comparison of Hull Girder Bending Analysis

Elastic buckling behavior of steel trapezoidal corrugated shear walls with vertical stiffeners

Study on the Optimal Design of the Members of Contaniner Building with Building Materials I: Side Board Optimization

A study of ultimate strengths of typical longitudinal girders with openings in container ships

Automated Layout Design of Stiffened Container Structures Based on the Morphology of Plant Ramifications

Analysis on mechanical performance of cold-formed steel stud composite walls with holes

Study on the optimal design of the memebers of contaniner building with building materials II: Joint and corner column optimization

Effect of Stiffeners on Mechanical Behavior of T-Stubs Based on Experiment and Numerical Simulations

Internal Force Transfer Mechanism and Bearing Capacity of Vertical Stiffener Joints in CFDST Structures

Strength Evaluation of Intersection Between Stiffeners and Primary Supporting Members in Double Hull Structure

Experimental and Numerical Investigation on the Scaled Model of Lashing Bridge Coupled with Hull Structure and Container Stack