Abstract:In this paper, a fourth-order dual-band high-temperature superconducting (HTS) differential bandpass filter (BPF) with controllable midband frequencies and bandwidths is developed by using modified multimode square ring loaded resonators (SRLRs). The differential-mode (DM) bisection and common-mode (CM) bisection of the modified SRLR are analyzed by using the even- and odd-mode method twice, and the corresponding resonant properties are obtained. With a proper design of the modified SRLR, two lowest DM resonances are chosen to construct two DM passbands with high in-band CM suppression. The DM resonances can be adjusted flexibly after adding tunable patches to the square ring. Meanwhile, the internal coupling between two modified SRLRs can be controlled separately by using two geometrical parameters. Consequently, the proposed dual-band BPF can achieve independent control of both the midband frequencies and the bandwidths of its two passbands. Moreover, a wideband CM suppression is realized by a combined use of an appropriately selected feeding structure and a frequency discrepancy technique. A fourth-order dual-band differential BPF is designed with two passbands operating at 2.325 and 4.900 GHz, respectively. The filter is fabricated using HTS YBCO thin films on a MgO substrate. Good agreement between the simulated and measured frequency responses are observed, verifying well the proposed structure and design method.

Design of High-Temperature Superconducting Wideband Bandpass Filter with Narrow-Band Notch Resonators for Radio Telescope Application

Compact, High-Selectivity and Wideband Superconducting Bandpass Filter with a Narrow Notched-Band for Radio Astronomy Application

Design of a Miniaturized Dual-Band Double-Folded Substrate Integrated Waveguide Bandpass Filter with Controllable Bandwidths

A High-Temperature Superconducting Wideband Bandpass Filter at the L Band for Radio Astronomy

High-Temperature Superconducting Bandpass Filter Using Asymmetric Stepped-Impedance Resonators with Wide-Stopband Performance

Design and Performance of an HTS Wideband Microstrip Bandpass Filter at X‐band

Design of a Low-Band Wideband Superconducting Filter Using Triple-Mode Resonator

Development of highly selective compact high-temperature superconducting quad-band bandpass filter using interdigital feeding structure for radio astronomy

Design of Balanced Dual-Band Superconducting Bandpass Filter with High Selectivity and Deep Common-Mode Suppression

8-Ghz Narrowband High-Temperature Superconducting Filter with High Selectivity and Flat Group Delay

Compact High Temperature Superconducting Multi‐mode Ultra‐wideband Filter

A Narrow‐band High‐temperature Superconducting Filter with Wide Upper Stopband

A Uhf-Band Narrow-Band Hts Bandpass Filter with Wide Stopband Using Interdigital Structure

DESIGN OF A LOW-RF NARROWBAND HTS FILTER

A 14-Pole Dual-Band High Temperature Superconducting Filter Including Narrow Bandstop Notches

A 12-Pole Narrowband Highly Selective High-Temperature Superconducting Filter for the Application in the Third-Generation Wireless Communications

Quad-Band Superconducting Bandpass Filter Using Quad-Mode Stub-Loaded Resonators With Controllable Frequencies And Bandwidths

A High Performance Narrowband Superconducting Filter at Ku‐band

Dual-Band Superconducting Bandpass Filter Using Embedded Split Ring Resonator

Differential Dual-Band Superconducting Bandpass Filter Using Multimode Square Ring Loaded Resonators with Controllable Bandwidths

Compact High‐selectivity High‐temperature Superconducting Wideband Bandpass Filter Using Triple‐mode Stub‐loaded Loop Resonator