Differential Dual-Band Superconducting Bandpass Filter Using Multimode Square Ring Loaded Resonators with Controllable Bandwidths

Baoping Ren,Zhewang Ma,Haiwen Liu,Xuehui Guan,Xiaolong Wang,Pin Wen,Masataka Ohira

DOI: https://doi.org/10.1109/tmtt.2018.2882487

IF: 4.3

2018-01-01

IEEE Transactions on Microwave Theory and Techniques

Abstract:In this paper, a fourth-order dual-band high-temperature superconducting (HTS) differential bandpass filter (BPF) with controllable midband frequencies and bandwidths is developed by using modified multimode square ring loaded resonators (SRLRs). The differential-mode (DM) bisection and common-mode (CM) bisection of the modified SRLR are analyzed by using the even- and odd-mode method twice, and the corresponding resonant properties are obtained. With a proper design of the modified SRLR, two lowest DM resonances are chosen to construct two DM passbands with high in-band CM suppression. The DM resonances can be adjusted flexibly after adding tunable patches to the square ring. Meanwhile, the internal coupling between two modified SRLRs can be controlled separately by using two geometrical parameters. Consequently, the proposed dual-band BPF can achieve independent control of both the midband frequencies and the bandwidths of its two passbands. Moreover, a wideband CM suppression is realized by a combined use of an appropriately selected feeding structure and a frequency discrepancy technique. A fourth-order dual-band differential BPF is designed with two passbands operating at 2.325 and 4.900 GHz, respectively. The filter is fabricated using HTS YBCO thin films on a MgO substrate. Good agreement between the simulated and measured frequency responses are observed, verifying well the proposed structure and design method.