Abstract:In this paper, a superconducting YBa2Cu3Oy (YBCO) filter employs two sets of octagonal half-wavelength split ring resonators, which are designed to generate two passbands with compact size. The center frequency of the lower passband can be tuned by the outer resonators with loading spirals, and the center frequency of the upper passband can be adjusted by the inner resonators with interdigital structure. Both of them provide sufficient degrees of freedom to control the center frequencies and fractional bandwidths of the two passbands, independently. In addition, a pair of side-coupled stubs is applied to control the bandwidth of the lower passband whereas the interdigital structure is used to adjust the coupling strength between the inner split ring resonator (SRR). Based on the above-mentioned design methodology, a dual-band superconducting elliptic-function-response bandpass filter operating at 2.45 and 3.5 GHz is proposed in this paper. Simulated results show that the insertion losses in both passbands are less than 0.05 dB. Four transmission zeros are created close to the passband edges, resulting in high skirt selectivity. For fabrication, high-T-c superconducting YBCO films are deposited on double-side-polished 0.5-mm-thick MgO substrates. The overall size of this filter is 12.1 x 8.4 mm (about 0.25 x 0.17 lambda(g), where lambda(g) is the guided wavelength at the center frequency of the first passband).

Development of highly selective compact high-temperature superconducting quad-band bandpass filter using interdigital feeding structure for radio astronomy

A 1.3–1.7-Ghz $Q$ -Enhanced Resonator-Based High-IF Bandpass Filter with 1.5%–67% Tunable Fractional Bandwidth in 65-Nm CMOS Process

Design of High-Temperature Superconducting Wideband Bandpass Filter with Narrow-Band Notch Resonators for Radio Telescope Application

Compact, High-Selectivity and Wideband Superconducting Bandpass Filter with a Narrow Notched-Band for Radio Astronomy Application

A High-Temperature Superconducting Wideband Bandpass Filter at the L Band for Radio Astronomy

Quad-Band Superconducting Bandpass Filter Using Quad-Mode Stub-Loaded Resonators With Controllable Frequencies And Bandwidths

A Narrow‐band High‐temperature Superconducting Filter with Wide Upper Stopband

8-Ghz Narrowband High-Temperature Superconducting Filter with High Selectivity and Flat Group Delay

High-Temperature Superconducting Bandpass Filter Using Asymmetric Stepped-Impedance Resonators with Wide-Stopband Performance

A 12-Pole Narrowband Highly Selective High-Temperature Superconducting Filter for the Application in the Third-Generation Wireless Communications

Dual-Band Superconducting Bandpass Filter Using Embedded Split Ring Resonator

Compact, Low Loss, and High Power Handling HTS Dual-Mode Double-Strip Resonator Filter With New Feeding Structure

A Uhf-Band Narrow-Band Hts Bandpass Filter with Wide Stopband Using Interdigital Structure

Design of a Superconducting Ultra-Wideband (UWB) Bandpass Filter with Sharp Rejection Skirts and Miniaturized Size

Q-band balanced bandpass filter based on rectangular micro-coaxial transmission line with improved common-mode suppression

A High Performance Narrowband Superconducting Filter at Ku‐band

Design of Balanced Dual-Band Superconducting Bandpass Filter with High Selectivity and Deep Common-Mode Suppression

Accurate Design of High Tc Superconducting Microstrip Filter at UHF Band for Radio Astronomy Front End

Design of a Low-Band Wideband Superconducting Filter Using Triple-Mode Resonator

Compact Dual-Band HTS Bandpass Filter Using Spirally Asymmetric Stepped-Impedance Resonators

A Six‐pole Ultra‐narrowband High‐temperature Super Conducting Filter at S‐band