Abstract:Optical surfaces with high quality have been widely applied in high-tech industries for their excellent performances. To precision manufacture those surfaces efficiently and effectively, various machining technologies involved become extremely crucial. As one of the promising ultra-precision machining technologies, inflated or solid elastic tool polishing has attracted more attention for its own superiority. However, there is still lack of understanding on material removal mechanisms especially with the consideration of curvature effect, and it is of great importance to determine the surface quality and form control in ultra-precision polishing process. In this paper, originating from the famous macro-scale Preston equation, the curvature effect-based material removal model in polishing using a flexible ball-end tool has been developed successfully on the basis of two key sub-models, one is the generic model of effective relative velocity and the other refers to the semi-experimental contact pressure model. A series of spot polishing experiments subsequently are conducted on concave surfaces with a curvature radius range from 75 mm to 225 mm. The experimentally measured section profiles of polishing spots do match well with the predicted data, which verifies the effectiveness of the proposed material removal model. On the measured polishing spots, it is also observed that there have two nonuniform material removal phenomena, one is analyzed along the central axis and the other is discussed by two regions symmetrical about the central axis. Compared with the effective relative velocity, it is found that, the contact pressure is more sensitive to curvature effect by investigating the variation of maximum removal depth within a broader curvature radius range from 75 mm to 1000 mm. This study can provide a valuable foundation for polishing optical surfaces with deterministic removal.

The Effect of Tool Wear on the Removal Characteristics in High-Efficiency Bonnet Polishing

Influencing mechanism of the key parameters during bonnet polishing process

Impact of Pad Conditioning on the Bonnet Polishing Process

Study on the Removal Function of Annular Polishing Pad Based on the Computer Controlled Polishing Technology

Research on Computer Controlled Optical Surfacing (CCOS) Working Function at Wear State

Influence of the Shape of Polishing Tools on the Surface Roughness in Magneto-rheological Finishing

Mechanism of Mid-Spatial-frequency Waviness Removal by Viscoelastic Polishing Tool

Evaluation of removal characteristics of bonnet polishing tool using polishing forces collected online

Enhanced Material Removal Modeling in Cylindrical Bonnet Tool Polishing: Incorporating Time-Dependent Pad Wear Effects

Towards Understanding and Restraining the Mechanical Relaxation Effect in Polishing Silicon Carbide with a Detachable Bonnet Tool

Study on NC Compliant Bonnet Tool Abrasive Polishing Based on Magnetorheological Torque Servo

Simulation and Experimental Study on Form-Preserving Capability of Bonnet Polishing for Complex Freeform Surfaces

An experimental study on the correlation of polishing force and material removal for bonnet polishing of cobalt chrome alloy

Curvature effect-based modeling and experimentation of the material removal in polishing optical surfaces using a flexible ball-end tool

Effect of Pad Wear on Tool Influence Function in Robotic Polishing of Large Optics

Effect of the Binder during Ultra-Precision Polishing of Tungsten Carbide Using a Semirigid Bonnet Tool

Research on polishing aluminum alloy optical elements with a new solid flexible bonnet tool

Local Material Removal Model Considering the Tool Posture in Deterministic Polishing

Material Removal and Surface Integrity Analysis of Ti6Al4V Alloy after Polishing by Flexible Tools with Different Rigidity

Theoretical and experimental investigation of material removal in semi-rigid bonnet polishing of binderless tungsten carbide

Effect of surface polishing on the tribological performance of hard coatings under lubricated three-body abrasive conditions