Abstract:We report a temperature measurement method based on fixed wavelength transmission intensity of long-period fiber grating. Relative to wavelength or edge filtering, this method has obvious advantages in measurement accuracy and cost. The relationship between the transmission intensity and temperature at a fixed wavelength is simulated based on the theory of long-period fiber grating coupling mode. The results show that the transmission intensity of the fixed wavelength is linearly related to the temperature with the appropriate parameters. In the experiment, the transmission spectrum shows two resonant peaks at 1485 and 1538 nm. Two fixed wavelengths at 1480.4 and 1549.7 nm were selected, and the results show a linear relationship between transmission intensity and temperature. The temperature sensitivity of the transmission intensity at 1480.4 nm is about 0.0544 dB / ° C, which means the value of I1480.4 nm / I0 changes by 1.3% for every 1°C. To eliminate the influence of light source and enhance the measurement sensitivity, the ratio of the transmission intensity of two fixed wavelengths was selected to carry out the temperature measurement. The temperature sensitivity of the ratio of I1480.4 nm / I1549.7 nm was 0.0729 dB / ° C, that is, the light intensity ratio changed by 1.7% when the temperature changed by 1°C. A more reasonable design of long-period fiber grating and a more appropriate selection of fixed wavelength should be able to obtain higher temperature sensitivity.

Measurements of Thermo-Optic Coefficient of Standard Single Mode Fiber in Large Temperature Range

A High Sensitivity Temperature Sensor Based on Balloon-Shaped Bent SMF Structure with Its Original Polymer Coating

Inexpensive optical fiber Fabry–Perot microcavity with controllable length for sensitive temperature measurements

Simultaneous Measurement of Refractive Index and Temperature Using a Mach-Zehnder Interferometer with Forward Core-Cladding-core Recoupling

Measurement of Sapphire Wafer Thermo-Optic Coefficient Using High-Temperature Optical Fiber Sensors

Fiber-Optic High-Temperature Sensor Based on Thin-Core Fiber Modal Interferometer

Yb,Er,Tm:Sc2O3 Single Crystal Fibers for Multi-Mode Optical Thermometry

Fabry-Perot Interferometric High-Temperature Sensing Up To 1200 Degrees C Based On A Silica Glass Photonic Crystal Fiber

Research On Measurement Of Fiber Bragg Grating Considering The Cross-Sensitivity Of Temperature And Strain

Method for temperature measurement of taper long-period fiber Bragg grating

Thermo-Optic Property Measurement Using Surface Plasmon Resonance-Based Fiber Optic Sensor

Influence of environment temperature wide-range variation on Brillouin shift in optical fiber

Fiber-optic Mach–Zehnder interferometric sensor for high-sensitivity high temperature measurement

Highly Sensitive and Fast Surface Temperature Sensor Based on Standard Single-Mode Fiber Using Double Heterodyne Interference Technology

The Polydimethylsiloxane Coated Fiber Optic for All Fiber Temperature Sensing Based on the Multithin–Multifiber Structure

Highly-sensitive temperature sensor based on photopolymerized-waveguide embedded Mach-Zehnder interferometer

Temperature Measurement Using Optical Fiber Methods: Overview and Evaluation

Femtosecond Laser Microprinting of a Polymer Optical Fiber Interferometer for High-Sensitivity Temperature Measurement

Temperature Sensors Operating Near The Dispersion Turning Point Of Microfiber Based Two-Mode Fiber

Theoretical and experimental investigation on temperature coefficient of optical fiber delay at cryogenic ranges

An Anti-Jamming High-Temperature Sensor Based on Optical Fiber In-Line Mach–Zehnder Interferometer Structure