Abstract:The direct synthesis of light olefins from syngas via Fischer-Tropsch synthesis reaction is a promising technology for direct synthesis of olefins from syngas. The key is to improve the selectivity of light olefins through the regulation of product distribution. In this work, the hydrophobic Fe@Si catalyst was prepared by room temperature solid state methodStober-silylation method, and then the catalyst was combined with SAPO-34 molecular sieves with different contents to prepare Fe@Si/S-34 composite catalysts. The effects of SAPO-34 molecular sieve content on the physicochemical properties of the catalysts were investigated by X-ray diffraction, scanning electron microscopy, N-2 adsorption-desorption, NH3 temperature programmed desorption and water contact angle measurement. The results showed that the content of SAPO-34 molecular sieve has significant influence on the surface area, pore volume, acidity and hydrophobicity of the catalysts. With the increase of SAPO-34 molecular sieve content, the specific surface area and total pore volume of the catalyst increased, the weak acid and medium-strong acid sites increased, and the hydrophobicity weakened. The catalytic performance evaluation results showed that the Fe@Si/S-34 composite catalyst decomposed C5+ hydrocarbons into light hydrocarbons, significantly reduced the selectivity of C5+ products and increased the selectivity of C2 similar to C4 hydrocarbons. Appropriate SAPO-34 molecular sieve could significantly improve the selectivity of C2 similar to C-4 olefins. When the mass ratio of Fe@Si catalyst to SAPO-34 is 2, the C-2 similar to C-4 olefin selectivity of Fe@Si/S-34 catalyst is the highest, the conversion of CO is 80.0%, the selectivity of CO2 in the product is 8.9%, and the selectivity of C-2 similar to C-4 olefins is 31.1%. In this study, the hydrophobicity of Fe@Si catalyst and the cracking activity of SAPO-34 molecular sieve for C5+ hydrocarbon were coupled together to inhibit the water-gas shift (WGS) reaction, reduce the CO2 selectivity and obtain higher C-2 similar to C-4 olefin selectivity, which provided a new strategy for the development of catalysts for Fischer-Tropsch synthesis to olefins.

Synthesis and Catalytic Properties of Large Single Crystal FeAPO-5 Molecular Sieves

Preparation of Fe@Si/S-34 Catalysts and Its Catalytic Performance for Syngas to Olefins

Synthesis of Fe, Co, and Mn substituted AlPO-5 molecular sieves and their catalytic activities in the selective oxidation of cyclohexane

Synthesis of Hierarchical MeAPO-5 Molecular Sieve and Optimization of its Catalytic Oxidation of Benzene to Phenol Based on Response Surface Method

27-P-07-High catalytic activity of Fe (III)-substituted aluminophosphate molecular sieves (FeAPO) in oxidation of aromatic compounds

Catalytic Activity of Fe(Iii)-Substituted Aluminophosphate Molecular Sieves in Oxidation of Aromatic Compounds

Synthesis of SAPO-44 molecular sieve and its catalytic performance in methanol-to-olefins reaction

Hierarchically structured SAPO-5 molecular sieve catalysts with tailored mesoporosity for alkylation reaction

Synthesis of Fe Substituted Aluminophosphate Feapo-5 Zeolite with Mesoporosity in Compressed Co2 for the Improved Catalytic Activity

Studies on preparing molecular sieves AIPO4-5 and AIPO4-11 by the vapour phase method

Catalytic and deactivated behavior of SAPO-34/ZSM-5 composite molecular sieve synthesized by in-situ two-step method

Synthesis of SAPO-34 Molecular Sieves and Their Catalytic Performances in Methanol-to-Olefins Reaction

Synthesis and Characterization of SAPO-56, a New member of silicoaluminophosphate

Synthesis and Catalytic Cracking Performance of Fe/Ti-ZSM-5 Zeolite from Attapulgite Mineral

Synthesis of Sapo-34 Molecular Sieve Using Hydrogen Fluoride and Triethylamine As Composite Template

Synthesis, Characterization of Bimetallic Ce–Fe-SBA-15 and Its Catalytic Performance in the Phenol Hydroxylation

Synthesis and characterization of the novel molecular sieve CFSAPO-1

The preparation of Fe3+ ion-exchanged mesopore containing ZSM-5 molecular sieves and its high catalytic activity in the hydroxylation of phenol

Enhancing Stability of SAPO-37 Molecular Sieve through Aluminum Phosphate Utilization: Synthesis, Stability Mechanism, and Catalytic Performance

Synthesis and crystal morphology control of AlPO4-5 molecular sieves by microwave irradiation

Synthesis, Characterization of Bimetallic V-Fe-SBA-15 and Its Catalytic Performance in the Hydroxylation of Phenol.