Abstract:Two models for the constitutive behavior of polycrystalline shape memory alloys (SMAs) are presented. One is a two-phase mixture model, and the other is a microstructure-based two-phase model, accounting for the typical constitutive behavior of Ni-Ti SMAs under different stress states. In both models, it is assumed that in the interested ranges of stress and temperature, the austenite phase is linearly elastic while the martensite phase is elastoplastic.In the first model, an SMA is considered to be composed of austenite and martensite phases, and its constitutive behavior is the combination of the individual behavior of each of the two phases. Making use of the simple Tanaka's phase-transformation rule, the main features of SMAs, such as shape memory effect and pseudoelasticity, can be successfully described. The constitutive behavior of SMA Au-47.5 at.% Cd subjected to uniaxial tension/compression and the pseudoelasticity of a polycrystalline Cu-Al-Zn-Mn SMA subjected to proportional and nonproportional complex stress/strain histories were simulated and compared with experimental results.Experiments showed that the pseudoelastic behavior of NiTi SMAs under pure tension and that under pure torsion were distinctly different, due to the different deformation-induced-transformation microstructures. SEM observation showed parallel texture on the surface of the NiTi SMA microtubes subjected to pure torsion, indicating alternatively arranged parallel fine lamellas of austenite and martensite phases. During pure tension, it was observed that martensite initiated from the parent phase and grew to macroscopic bands, and, correspondingly, a typical stress drop or macroscopic instability was observed in the tensile stress strain curve. FE analyses based on these microstructures replicated the experimental results under pure tension and under pure torsion, respectively, indicating the important role of the microstructure in the macroscopic constitutive response.A microstructure-based two-phase model was developed for the pseudoelastic behavior of NiTi SMAs, which includes three stages: elastoplastic model for the martensite phase and the linearly elastic model for the austenite phase; the model for a representative volume element (RVE) of a cell composed of alternatively arranged parallel austenite and martensite lamellas; and the model for an NiTi SMA by considering the material as an aggregate of numerous cells and making use of the Hill's self-consistent scheme. The model could satisfactorily describe the main characteristics of the pseudoelastic behavior of the NiTi SMA under pure tension and pure torsion. The pseudoelastic behavior of the NiTi SMA under biaxial tension-torsion were also analyzed and compared with experimental results.

Determining the Up-Down-Up Response Through Tension Tests of A Pre-Twisted Shape Memory Alloy Tube

Experimental and Numerical Study of the Superelastic Behaviour on NiTi Thin-Walled Tube under Biaxial Loading

Theoretical and Experimental Studies of Torsion Deformation of A Thin-Walled Tube with Wound and Pasted Shape Memory Alloy Wires

Analysis of a Shape Memory Alloy Plate with a Circular Hole Subjected to Biaxial Tension

Study on thermo-mechanical behaviors of shape memory alloy torsion tube

Investigation on Thermo-Mechanical Behaviors of Shape Memory Thin-Walled Tube

A Thermomechanically Coupled Finite Deformation Constitutive Model for Shape Memory Alloys Based on Hencky Strain

One-dimensional modeling of stress-induced transformation behaviour of shape memory alloy

Phase Transformation Characteristics of High-Temperature Shape Memory Alloy under Tension, Compression, and Bending Actuation Cycling

A Three-Dimensional Constitutive Model for Shape Memory Alloy Considering Transformation-Induced Plasticity, Two-Way Shape Memory Effect, Plastic Yield and Tension-Compression Asymmetry

A Constitutive Description for Shape Memory Alloys with the Growth of Martensite Band.

Experimental Investigation to Thermal–mechanical Behavior of Ni47Ti44Nb9 SMA under Pure Tension and Pure Torsion

Constitutive Model for Shape Memory Alloy Torsion Actuator

Mechanical Behaviors of Torsion Actuator of Shape Memory Alloy

Strain Self-Sensing Property and Strain Rate Dependent Constitutive Model of Austenitic Shape Memory Alloy: Experiment and Theory

A microstructure-based constitutive model for the pseudoelastic behavior of NiTi SMAs

Tensile Deformation Behavior of High-Strength TA18 Titanium Alloy Tube under Warm Forming Conditions and Constitutive Model Based on Dislocation Density

Constitutive Models For Shape Memory Alloys: A Two-Phase Mixture Model And A Microstructure-Based Model

Thermo-mechanically coupled deformation of pseudoelastic NiTi SMA helical spring

Torsional actuation and vari-stiffness characteristics of SMA/basalt hybrid braided composite tubes

Experimental Study of the Biaxial Cyclic Behavior of Thin-Wall Tubes of NiTi Shape Memory Alloys