Method and Evaluation of Repairing the Erosion Defect on the Lsr Shed of the Insulation Jacket

Weian Ye,Zhidong Jia,Can Chen,Shitao Liu,Zhenhua Yan
DOI: https://doi.org/10.1109/ceidp.2016.7785564
2016-01-01
Abstract:As an important composite material, Liquid silicone rubber (LSR) is widely used in outside insulation. Due to high electrical field intensity and contaminant contained conductive particles and metal dust, severe discharge and erosion occurred on the surface of LSR shed on insulation jacket, resulting in erosion defect with depth of over 1mm. Using artificial contaminant, the formation of erosion defect was simulated in the laboratory. In order to repair the LSR shed, repairing method using room temperature vulcanized silicone rubber adhesive (RTV adhesive) and room temperature vulcanized silicone rubber antipollution flashover coating (RTV coating) was proposed. RTV adhesive was applied to fill the erosion defect, and RTV coating was applied to improve the surface physical and electrical properties. Evaluation of the repairing method was done by comparing shore hardness, hydrophobicity, tracking and erosion resistance after repairing and before erosion. Cross cut test, bending test was applied to test the adhesion between RTV adhesive and RTV coating. Scanning electron microscope (SEM) was used to observe the interface between LSR-RTV layers and two RTV layers. Physical and electrical experiment show that hardness, hydrophobicity and resistance of tracking and erosion stay the same after repairing and before erosion. Cross cut test reach ISO-1 level and bending test shows no peeling and cracking on the surface, proving great adhesion between RTV coating and RTV adhesion. SEM shows that the bonding between RTV and LSR is strong. The method proposed by this paper could be applied to repaired erosion defect on LSR shed. After repairing, both electrical and physical property could be recovered.
What problem does this paper attempt to address?