Abstract:Cutting mechanics of soft solids is gaining rapid attention thanks to its promising benefits in material characterization and other applications. However, a full understanding of the physical phenomena is still missing, and several questions remain outstanding. E.g.: How can we directly and reliably measure toughness from cutting experiments? What is the role of blade sharpness? In this paper, we explore the simple problem of wire cutting, where blade sharpness is only defined by the wire radius. Through finite element analysis, we obtain a simple scaling relation between the wire radius and the steady-state cutting force per unit sample thickness. The cutting force is independent of the wire radius if the latter is below a transition length, while larger radii produce a linear force-radius correlation. The minimum cutting force, for small radii, is given by cleavage toughness, i.e., the surface energy required to break covalent bonds in the crack plane. The force-radius slope is instead given by the wear shear strength in the material. Via cutting experiments on polyacrylamide gels, we find that the magnitude of shear strength is close to the work of fracture of the material, i.e., the critical strain energy density required to break a pristine sample in uniaxial tension. The work of fracture characterizes the toughening contribution from the fracture process zone (FPZ), which adds to cleavage toughness. Our study provides two important messages, that answer the above questions: toughness can be estimated from wire-cutting experiments from the intercept of the force-radius linear correlation, as previously explored. However, as we discovered, this only estimates cleavage toughness. Additionally, the force-radius slope is correlated with the work of fracture, giving an estimation of the dissipative contributions from the FPZ.

Slicing of a soft solid

Cutting and slicing weak solids

Making the cut: end effects and the benefits of slicing

Cutting soft matter: scaling relations controlled by toughness, friction, and wear

Cutting Mechanics of Soft Compressible Solids: Force-radius scaling versus bulk modulus

Multiscale mechanics of polydimethylsiloxane: A comparison of meso‐ and micro‐cyclic deformation behavior

Molecular Dynamics Simulation of Elliptical Vibration Cutting

An Experimental Study on Stretchy and Tough PDMS/Fabric Composites

Sliding characteristics of bioinspired polydimethylsiloxane micropillars under bending states

Competition between slicing and buckling underlies the erratic nature of paper cuts

Cylindrical Cavity Expansion: A Novel Method for Characterizing the Mechanical Properties of Soft Materials

Numerical Simulation and Experimental Study of Crack Propagation of Polydimethylsiloxane

Soft Granular Particles Sheared at a Controlled Volume: Rate-dependent dynamics and the solid-fluid transition

Molecular dynamics simulation investigation on the plastic flow behaviour of silicon during nanometric cutting

Enhanced Rupture Force in a Cut-Dispersed Double-Network Hydrogel

Anisotropy of Single-Crystal Silicon in Nanometric Cutting

Cutting of Graphite at Atomic and Close-to-Atomic Scale Using Flexible Enhanced Molecular Dynamics

Finite element modeling of the puncture-cutting response of soft material by a pointed blade

Softening and Yielding of Soft Glassy Materials

Robotic Cutting of Fruits and Vegetables: Modeling the Effects of Deformation, Fracture Toughness, Knife Edge Geometry, and Motion