Abstract:Cutting mechanics of soft solids is gaining rapid attention thanks to its promising benefits in material characterization and other applications. However, a full understanding of the physical phenomena is still missing, and several questions remain outstanding. E.g.: How can we directly and reliably measure toughness from cutting experiments? What is the role of blade sharpness? In this paper, we explore the simple problem of wire cutting, where blade sharpness is only defined by the wire radius. Through finite element analysis, we obtain a simple scaling relation between the wire radius and the steady-state cutting force per unit sample thickness. The cutting force is independent of the wire radius if the latter is below a transition length, while larger radii produce a linear force-radius correlation. The minimum cutting force, for small radii, is given by cleavage toughness, i.e., the surface energy required to break covalent bonds in the crack plane. The force-radius slope is instead given by the wear shear strength in the material. Via cutting experiments on polyacrylamide gels, we find that the magnitude of shear strength is close to the work of fracture of the material, i.e., the critical strain energy density required to break a pristine sample in uniaxial tension. The work of fracture characterizes the toughening contribution from the fracture process zone (FPZ), which adds to cleavage toughness. Our study provides two important messages, that answer the above questions: toughness can be estimated from wire-cutting experiments from the intercept of the force-radius linear correlation, as previously explored. However, as we discovered, this only estimates cleavage toughness. Additionally, the force-radius slope is correlated with the work of fracture, giving an estimation of the dissipative contributions from the FPZ.

Delayed allergic reaction to natalizumab associated with early formation of neutralizing antibodies.

Competition between slicing and buckling underlies the erratic nature of paper cuts

Making the cut: end effects and the benefits of slicing

Cutting soft matter: scaling relations controlled by toughness, friction, and wear

Kirigami mechanics as stress relief by elastic charges

Slicing of a soft solid

Cutting and slicing weak solids

The Geometry of Crumpled Paper

A Comprehensive Understanding of Knife Cutting: Effects of Hardness, Blade Angle and the Micro-Geometry of Blade Edge on the Cutting Performance

Experimental investigation into paper dust formation during knife edge cutting on a laboratory scale

Engineering by Cuts: How Kirigami Principle Enables Unique Mechanical Properties and Functionalities

Theoretical Puncture Mechanics of Soft Compressible Solids

Augmented snap-through instability of folded strips

Kirchhoff's law-based velocity-controlled motion models to predict real-time cutting forces in minimally invasive surgeries

Robotic Cutting of Fruits and Vegetables: Modeling the Effects of Deformation, Fracture Toughness, Knife Edge Geometry, and Motion

Delamination from an adhesive sphere: Curvature-induced dewetting versus buckling

Initial rigid response and softening transition of highly stretchable kirigami sheet materials

Curving expectations: The minimal impact of structural curvature in biological puncture mechanics

Enhanced Rupture Force in a Cut-Dispersed Double-Network Hydrogel