Abstract:Owing to the moderate energy offset between light and heavy band edges of the rock‐salt structured GeTe, its figure‐of‐merit (ZT) can be enhanced by the rational manipulation of electronic band structures. In this study, density functional theory calculations are implemented to predict that V is an effective dopant for GeTe to enlarge the bandgap and converge the energy offset, which suppresses the bipolar conduction and increases the effective mass. Experimentally, V‐doped Ge1−xVxTe samples are demonstrated to have an enhanced Seebeck coefficient from ≈163 to ≈191 µV K−1. Extra alloying with Bi in Ge1−x−yVxBiyTe can optimize the carrier concentration to further enhance the Seebeck coefficient up to ≈252 µV K−1, plus an outstanding power factor of ≈43 µW cm−1 K−2. Comprehensive structural characterization results also verify the refinement of grain size by V‐doping, associated with highly dense grain boundaries, stacking faults, nanoprecipitates, and point defects, reinforcing the wide‐frequency phonon scattering and in turn, securing an ultralow thermal conductivity of ≈0.59 W m−1 K−1. As a result, the Ge0.9V0.02Bi0.08Te sample shows a peak ZT of >2.1 at 773 K, with an average plateaued average ZT of >2.0 from 623 and 773 K, which extends better thermoelectric behavior for GeTe over a wider temperature range. This study clarifies the multiple benefits of V‐doping in GeTe‐based derivatives and provides a framework for a new‐type of high‐performance middle‐temperature thermoelectric material.

Optimizing Electronic Quality Factor toward High‐Performance Ge 1− x − y Ta x Sb y Te Thermoelectrics: The Role of Transition Metal Doping

Optimizing Electronic Quality Factor toward High-Performance Ge<sub>1-</sub><i><sub>x</sub></i><sub>-</sub><i><sub>y</sub></i>Ta<i><s ub>x</sub></i>Sb<i><sub>y</sub></i>Te Thermoelectrics: The Role of Transition Metal Doping

Functionally Separated Electronic Band Engineering Via Multi-Element Doping Plus High-Density Defects Advances Board-Temperature-range Thermoelectric Performance in GeTe

Tailoring band structure and Ge precipitates through Er and Sb/Bi co-doping to realize high thermoelectric performance in GeTe

Realizing High Thermoelectric Performance in GeTe‐Based Supersaturated Solid Solutions

High Thermoelectric Performance Achieved in Sb-Doped GeTe by Manipulating Carrier Concentration and Nanoscale Twin Grains

Achieving high thermoelectric quality factor toward high figure of merit in GeTe

Nuanced dilute doping strategy enables high-performance GeTe thermoelectrics

Band structure and microstructure modulations enable high quality factor to elevate thermoelectric performance in Ge0.9Sb0.1Te-x%FeTe2

Achieving Ultralow Lattice Thermal Conductivity and High Thermoelectric Performance in GeTe Alloys Via Introducing Cu2Te Nanocrystals and Resonant Level Doping.

Ultralow Lattice Thermal Conductivity and Superhigh Thermoelectric Figure‐of‐Merit in (Mg, Bi) Co‐Doped GeTe

Valence Band Modification and Enhanced Phonon‐Phonon Interactions for High Thermoelectric Performance in GeTe

Achieving Ultralow Lattice Thermal Conductivity and High Thermoelectric Performance in GeTe Alloys via Introducing Cu 2 Te Nanocrystals and Resonant Level Doping

Versatile Vanadium Doping Induces High Thermoelectric Performance in GeTe via Band Alignment and Structural Modulation

Origin of the High Performance in GeTe-Based Thermoelectric Materials Upon Bi2Te3 Doping

Simultaneous Suppression of Phonon Transport and Carrier Concentration for Efficient Rhombohedral GeTe Thermoelectric

The effect of rare earth element doping on thermoelectric properties of GeTe

Ultra-Low Thermal Conductivity and Improved Thermoelectric Performance in Tungsten-Doped GeTe

Modifying Roles of CuSbSe2 in Realizing High Thermoelectric Performance of GeTe

Enhancing Near-Room-Temperature GeTe Thermoelectrics through In/Pb Co-doping

Enhanced Thermoelectric Performance in GeTe by Synergy of Midgap state and Band Convergence