Abstract:This paper presents a novel approach to convert a conventional house air conditioning installation into a more efficient system that individually controls the temperature of each zone of the house through Wi-Fi technology. Each zone regulates the air flow depending on the detected temperature, providing energy savings and increasing the machine performance. Therefore, the first step was to examine the communication bus of the air conditioner and obtain the different signal codes. Thus, an alternative Controller module has been designed and developed to control and manage the requests on the communication bus (Bus-Wi-Fi gateway). A specific circuit has been designed to adapt the signal of the serial port of the Controller with the communication bus. For the acquisition of the temperature and humidity data in each zone, a Node module has been developed, which communicates with the Controller through the Wi-Fi interface using the Message Queuing Telemetry Transport (MQTT) protocol with Secure Sockets Layer / Transport Layer Security (SSL/TLS) certificates. It has been equipped with an LCD touch screen as a human-machine interface. The Controller and the Node modules have been developed with the ultra-low power consumption CC3200 microController of Texas Instruments and the code has been implemented under the TI-RTOS real-time operating system. An additional module based on the Raspberry Pi computer has been designed to create the Wi-Fi network and implement the required network functionalities. The developed system not only ensures that the temperature in each zone is the desired one, but also controls the fan velocity of the indoor unit and the opening area of the vent registers, which considerably improves the efficiency of the system. Compared with the single-zone system, the experiments carried out show energy savings between 75% and 94% when only one of the zones is selected, and 44% when the whole house is air-conditioned, in addition to considerably improving user comfort.

Design and development of power line carrier communication system for variable refrigerant volume air-conditioning systems

Research on multi-parameter measure and control technology based on wireless communication in combined environment testing

Hierarchical Control of Air-Conditioning Loads for Flexible Demand Response in the Short Term.

Design of Power Assign Manager for Remote Power Supply Based on Network Line

Design of the Remote Monitoring and Fault Diagnosis System for Power Electronic Equipment

Design of Lighting System Controller Based on Low-voltage Power Line Carrier Communication

Constuction and design of distribution management system common communication platform

The Design and Implementation of HAVC System

Wireless Central Air Conditioning Billing System Based on ZigBee PRO

Design of Vertical Air Conditioning Control System

Low-Cost Conversion of Single-Zone HVAC Systems to Multi-Zone Control Systems Using Low-Power Wireless Sensor Networks

Development of a Wireless Data Transmission System used for Power Transformer On-line Calibration

Design of a Household Self-organized Heterogeneous Network Terminal

The Wireless Transmission of the Electric Power Parameter Data with the Wireless Receiving and Dispatching Module

A Hierarchical Architecture of Centralized Monitoring and Controlling System and Its High-Performance And??interoperability Protocol

Research of capacity expansion and self-constructing network of 230 MHz wireless network

Design of Building Intercom System Based on Power Line Carrier

Design of Data Transmission System Base on Power Line

The Design of Communication Controlles in the Real Temperature Monitoring System of a Radio Power Switch Cabinet

Design of a high-efficient networking algorithm for low-voltage power line communication

Air conditioning design for an electric power dispatching building