Abstract:The high-voltage dis-connector, as a key substation equipment in the power grid structure, is vitally important to the quality of the power grid operation. Due to the geographic location of Guangdong Province of China, many strong typhoons have caused great damage to power facilities in recent years. And the loss of the dis-connector is the most serious, which severely affects the reliability of the power supply. However, the research on the wind resistance of the dis-connector is still few, so the improvement work of the device is quite difficult. The phenomenon of strong typhoon destroying the dis-connector mainly includes the fracture of post insulator and the conductive arm. In the study of the mechanical properties of post insulator and the conductive arm, almost all wind loads are treated as a concentrated force, but the surfaces of the post insulator and the conductive arm are actually subjected to a continuous wind pressure distribution. The magnitude of the wind load and the error of its application method will inevitably lead to inaccurate stress and strain data obtained in the calculation of the strength of the post insulator and the conductive arm, so that the post insulator and the conductive arm cannot be accurately designed. In this paper, the wind resistance of the dis-connector are studied by using the fluid-structural coupling analysis method. Firstly, the hydrodynamic RNG k-ε turbulence model is used to simulate the wind field around the dis-connector, so as to obtain the accurate result of the wind pressure distribution on the surface of the dis-connector. Then the surface pressure of the dis-connector calculated by hydrodynamics simulation is introduced into the structural module of Ansys software as the applied load. The finite element method is used to simulate and calculate the stress and strain of the dis-connector, so as to obtain the mechanical characteristics of the dis-connector under strong wind. In addition, this paper analyzes the effects of different wind speeds and different wind directions on the wind load applied to the surface of dis-connector, and provide a basis for wind resistance design of dis-connector.

Research on the Structure of Composite Insulators Used in Strong Wind Area Based on Fluid-Structure Interaction Method

Study on the Distribution of Wind Pressure of Composite Insulators and the Testing Method of Anti-Wind Performance

Study on Wind Resistance Performance of 750 kV Composite Insulators Utilized in Storm-wind Region

Wind Tunnel Experiment and Numerical Simulation of Wind Pressure Distribution of Large-Span Membrane Structure

Wind load characteristics of crescent-shaped cantilevered roof with wavy surface

NUMERICAL SIMULATION OF WIND PRESSURES ON CANTILEVER GRANDSTAND ROOFS

Analysis on Fracture Failure Mechanism of 750 kV Composite Insulator Sheds Utilized in a Storm-hit Region

Flexural Experiment and Design Method of Steel-Wire-Enhanced Insulation Panels

Optimal Design of Electrical Field Distribution for 500 kV AC Composite Insulator

Research on the sheds structure design of the composite insulators used in the strong wind area in UHV transmission lines

Simulation Study on Wind Load and Mechanical Characteristics of High Voltage Dis-Connector

Fatigue Fracture of Composite Insulator Sheds Utilized in Strong Wind Areas

Internal Wind Effect for Long-Span Roof Structure with Openings

Wind-induced weak parts and reinforcement methods of long cross-armed transmission tower

Mechanical Properties of HTV Materials Used in Composite Insulators in Strong Wind Area

Study on Dynamic Performance of the Supporting Structure for Wind Power

The Design and Study of the Axisymmetrical Convergent Section for Fuse Electrical Machinery Set of Wind Turbine

Fluid-structure Interaction Analysis of Large-Span Air-Supported Membrane Structures under Typhoon Conditions

Study on the Hardening Mechanism of Composite Insulators

Wind Tunnel Simulation on Contamination Distribution of Canti-Lever Composite Insulator with Booster Sheds

Research on Mechanical Characteristics and Reinforcement Method of Linear Tower Under Strong Wind