Abstract:A wind-induced flashover incident involving a circuitous jumper on a 500 kV transmission line is researched,and a refined finite element numerical model of jump lines is established. The harmonic-wave superposition method is used to simulate the synoptic wind speed with six different turbulence intensities adapted to flat terrain, and the large eddy simulation is used to simulate the typhoon wind speed adapted to realistic mountainous microtopography. The peak factor,root mean square and extreme value of jumper swing response in seven wind fields are calculated, respectively, to analyze the effect of turbulence intensity on the typhoon wind field. The wind-induced swing morphology of jumper shows that the wind-induced swing should be judged based on the displacement of quarter-span instead of the insulator string. The displacement of the jumper is significantly affected by the high turbulence intensity during the typhoon, and the root-mean-square of the jumper displacement in the middle span is almost linearly correlated with the incoming turbulence intensity. A fitting formula for the extreme value of jumper swing response in the middle span is proposed. In mountainous microtopography, the wind field is affected by realistic microtopography such as terrain uplift and the effect of narrow, and the mean wind speed increases significantly, while the fluctuating wind speed does not change much or even decreases. The wind-induced swing response of jumper in the microtopography, which has less turbulence intensity than in flat terrain, still increases significantly, indicating that the microtopography has a significant amplifying effect on the wind speed. The minimum gap between the jumper and the tower is only 0.65 m according to the simulation, which is less than 1.2 m in specification. The results of the large eddy simulation show that the design wind speed at 10 m height can be amended by 1.5 times due to the effect of the mountainous microtopography, that is, to enhance the design wind speed to 40 m/s, which can satisfy the requirements of the jumper against wind-induced swing incidents.

Study on Wind Resistance Performance of 750 kV Composite Insulators Utilized in Storm-wind Region

Analysis on Fracture Failure Mechanism of 750 kV Composite Insulator Sheds Utilized in a Storm-hit Region

Study on the Distribution of Wind Pressure of Composite Insulators and the Testing Method of Anti-Wind Performance

Research on the Structure of Composite Insulators Used in Strong Wind Area Based on Fluid-Structure Interaction Method

Fatigue Fracture of Composite Insulator Sheds Utilized in Strong Wind Areas

Optimal Design of Electrical Field Distribution for 500 kV AC Composite Insulator

Effect of Damp Sheath on Abnormal Temperature Rise at End of Composite Insulator

Research on the sheds structure design of the composite insulators used in the strong wind area in UHV transmission lines

Mechanical Properties of HTV Materials Used in Composite Insulators in Strong Wind Area

Heating Mechanism and Control Measures of AC Composite Insulators in Super-humid Regions

Fault Analysis and Modified Measures of 500 Kv Compact Transmission Line

Buckling Performance of Polymer Insulator V-type Strings for 500 kV Compact Transmission Line Under Gale Circumstance

The Feasibility of Application of Composite Insulator in 750 kV Lines in High Altitude Area

Wind-induced Flashover Incident Analysis of Jumper Considering the Effect of Typhoon and Mountainous Topography

Mechanical Analysis of Tower-line System under Gale and Icy Circumstance

The Features of the Vibration Creep of Composite Insulator and the Determination of Its Test Parameters

Analysis on Mechanical Property of 110kv Power Transmission Line Tower under Different Wind Speed

Study on electrical properties and field solutions of water related heating of composite insulators on 500kV AC transmission lines

Study on the Wind Deviation Characteristics of Y-Type Insulator String under the Action of Strong Wind

Experiment Research of DC External Insulation in High Attitude Area

Discussion on Wind-induced Swing Flashover and Conductor Wind Load of EHV Transmission Lines