Effect of Icicle Bridge Conditions on the Melting Time Distribution and Flashover Probability
DENG Yu,JIA Zhidong,JIANG Hao,WANG Kangning,WANG Tianzheng,GUAN Zhicheng
DOI: https://doi.org/10.13336/j.1003-6520.hve.2014.11.045
2014-01-01
Abstract:Aiming at reflecting the effect of ice morphology on the melting process and its flashover, according to the ice morphology captured in field, we extracted four kinds of typical ice morphology including bridged icicles, non-bridged icicles, and their combination. Flashover experiments under different morphology were carried out during the melting period. According to the electrical field simulation, the effect of droplet ejection was analyzed and compared. Moreover, from the perspective of voltage-time distribution and flashover probability, we mainly concerned with the effect of impact factors, including applied water conductivity, icicle length, combination of air gap and icicle length, and compared their flashover characters. The experiment results show that the applied water conductivity and icicle length will affect the residue ice layer resistance; Flashover voltage decreases by 33% and 10%, respectively, while conductivity increases from 150 μS/cm to 750 μS/cm and length declines from 6 cm to 4 cm. Bridged icicle absorbs extra power for ice melting, leading to flashover increase. It is verified in the double ice layer experiment that flashover voltage increases by 14% when bridge icicle exists. It can be concluded that non-bridged icicle is more vulnerable to suffer ice flashover compared to bridged icicle because of electrical field concentration at the icicle tip, leading to relatively lower withstand voltage.