Abstract:Composite insulators have been widely used for its excellent flashover endurance capability, but the umbrella of standard composite insulators are easily been bridged in icing condition. Flashover problems caused by icing insulator have a serious threat to the safe operation of transmission lines,. It is the key technologies for the safe operation of power system which should be solved as soon as possible. The influence of two types of composite insulator umbrella structure (common type and anti-ice type) on iced AC flashover voltage characteristics in the same structure length, as well as same artificial pollution and artificial icing test conditions, but also the method of artificial iced flashover test on composite insulator were introduced. Iced flashover test results showed that the ice bridge formation could be prevented or extended if the umbrella structure design of anti-ice-type composite insulators was more reasonable. For the 750kV composite insulator under the same conditions of artificial pollution test (SDD/NSDD=0.08/0.48mg/cm2) and artificial icing test (when icing water converted to 20 °C, the conductivity is 100μS/cm and the iced thickness from 15mm), it is shown that AC iced flashover voltage of Anti-ice type increased 12%~28% than common type. Upon the existent theoretical and experimental results and based on a great of laboratory investigations carried out in environment laboratory of China UHV AC test base, for the first time this paper studies systematically the insulators shed optimization which will contribute to the designation for Ultra-UHV anti-icing composite insulators.

The Mechanism of Salt Migration Phenomena in Cooling Water and Its Impact on Ice Flashover

Salt Migration Phenomena During Phase Transition in Cooling Water and Its Impact on Leakage Current

Mechanism of Salt Migration in Icicles During Phase Transition and Its Impact on Ice Flashover

Experimental Study on Icing-flashover Mechanism for Iced Transmission Line in Early Ice-melting Stage

Study on AC Flashover Process of Iced 110 kV Insulator Strings

Mechanism of contaminant accumulation and flashover of insulator in heavily polluted coastal area

Analysis of the Flashover Process on Ice-covered Insulator String

Analysis on Main Influencing Factors of Icing Flashover of Insulators

Field and Laboratory Tests of Insulator Flashovers under Conditions of Light Ice Accumulation and Contamination

Experimental Investigation on Insulation Configuration for Antiicing on Transmission Lines in Ice Zone

Flashover of Composite Insulators Without Hydrophobicity under Heavy Ice and the Secondary Contamination Conditions

Development of Anti-Icing Coatings Applied to Insulators in China

Flashover performance of UHV&EHV post insulators under icing conditions

Review on Flashover Characteristics and Measures to Improve Flashover Voltage of the Ice-Coated Insulators

Flashover Performance of Pre-contaminated and Ice-covered Composite Insulators to be Used in 1000 kV UHV AC Transmission Lines

Analysis On Flashover Performance Of Polluted Porcelain Insulators In High Conductivity Fog Environment

Effect of Icicle Bridge Conditions on the Melting Time Distribution and Flashover Probability

De-Icing Strategies in Different Stages for Transmission Lines

The optimization of 750kV anti-ice-flashing composite insulator string

Study on Flashover Model of UHV Substation Post Insulator in Serious Icing Condition

Melting Process of Non-Bridged Icicle and Its Effect on Ice Flashover