Abstract:This paper investigates the DC pollution flashover performance of large-size suspension composite insulator and ±800 kV post composite insulator by vast artificial contamination tests in actual high altitude area. Pollution flashover voltages under different SDDs (Salt Deposit Distribution) of two kinds of insulators are obtained. Two on-load voltage methods are used in the artificial contamination test, rise-voltage method and up-and-down method. Test results indicate that, firstly the DC pollution flashover voltages of suspension insulator obtained by rise-voltage method are general higher than the results of up-and-down method. But the influences of SDD on flashover performance of two on-load voltage methods are different. Secondly, the average maximum value of leakage currents for post composite insulators increases as SDD, while, the time when maximum value of leakage current occurred shortens as SDD increasing in up-and-down tests. Thirdly, by ultra violet (UV) camera observation, the partial discharge of top section is more severe than other parts for large-size post composite insulators. Finally, experimental research shows that the DC pollution flashover voltages and the length of post composite insulators are accord with good linear relationship while the distance of installation from ground level shows on significant influence on the DC pollution flashover voltages. According to the above conclusions, this work have enriched the research of pollution flashover characteristics of outdoor insulation in actual high altitude area and can provide technical support for the external insulation design, operation and maintenance of ±800 kV Ultra High Voltage (UHV) DC transmission projects in high altitude area in China.

Review on Flashover Characteristics and Measures to Improve Flashover Voltage of the Ice-Coated Insulators

Icing Flashover Characteristics of EHV AC Transmission Line Insulator Strings

Research status of the external insulation pollution flashover of high voltage transmission line

Study on AC Flashover Process of Iced 110 kV Insulator Strings

Icing Flashover Characteristics of 500 Kv AC Post Insulators

Flashover performance of UHV&EHV post insulators under icing conditions

Experimental Investigation on Insulation Configuration for Antiicing on Transmission Lines in Ice Zone

Analysis on Main Influencing Factors of Icing Flashover of Insulators

De-Icing Strategies in Different Stages for Transmission Lines

Study on methods of preventing pollution flashover and wet flashover for 750 kV lines in high altitude area

Statistical analysis on the DC discharge path of ice-covered insulators under natural conditions

Flashover Performance of Pre-contaminated and Ice-covered Composite Insulators to be Used in 1000 kV UHV AC Transmission Lines

The optimization of 750kV anti-ice-flashing composite insulator string

Study on the Icing Flashover Characteristics of Porcelain Double Sheds Suspension Insulator String

Three‐dimensional electric field simulation and flashover path analysis of ice‐covered suspension insulators

Analysis of the Flashover Process on Ice-covered Insulator String

Development of Anti-Icing Coatings Applied to Insulators in China

Research on pollution flashover characteristics of large-size composite outdoor insulation for UHV DC in high altitude area

Pollution Flashover Characteristics of the Insulators Of±800 Kv HVDC Lines under High Altitude Areas

Wet snow flashover characteristics of the insulator strings in ' Λ ' Shape on 500 kV transmission lines