Abstract:Nowadays, the structural complexity of dyes used in the textile industry and the widely adopted water-saving strategy in the dyeing processes often fail plants’ biological wastewater treatment units due to chemical oxygen demand (COD) overload. To alleviate this problems, this study investigated a regenerable adsorption–oxidation process to treat dyeing wastewater with COD around 10,000 mg/dm3 using a highly nano-pored activated carbon (AC) as a COD adsorbent, followed by its regeneration using hydrogen peroxide as an oxidizing reagent. In addition to studying AC’s COD adsorption and oxidation performance, its operational treatment conditions in terms of temperature and pH were assessed. The results firstly demonstrated that about 50–60% of the COD was consistently adsorbed during the repeated adsorption operation before reaching AC’s maximum adsorption capacity (qmax) of 0.165 g-COD/g-AC. The optimal pH and temperature during adsorption were 4.7 and 25 °C, respectively. Secondly, AC regeneration was accomplished by using an initial peroxide concentration of 2.5% (by wt %) and EDTA-Fe of 2.12 mmole/dm3. The reuse of the regenerated ACs was doable. Surprisingly, after the first AC regeneration, the COD adsorption capacity of the regenerated AC even increased by ~7% with respect to the virgin AC. Thirdly, the results of a five-consecutive adsorption–regeneration operation showed that a total of 0.3625 g COD was removed by the 5 g AC used, which was equivalent to an adsorption capacity (q) of 0.0725 (= 0.3625/5) g-COD/g-AC during each adsorption stage. Based on the obtained results, a regenerable COD adsorption–oxidation process using a nano-pored AC to treat the high-textile-COD wastewater looks promising. Thus, a conceptual treatment unit was proposed, and its potential benefits and limitations were addressed.

Study on Treatment of Polyacrylonitrile Fiber Wastewater by Coagulation-Anaerobic-Anoxic-Aerobic Process

The Investigation of the Treatment of Dyeing Wastewater by Galvanic Corrosion-Reduction Degradation-Coagulation Absorption

Research on the Dry Acrylon Wastewater Treatment by Single and Two Phase Anaerobic Methods

Pretreatment of a textile wastewater from alkali reduction,printing and dyeing operations

Treatment of Fiberglass Wastewater

DYEING WASTEWATER TREATMENT AND REUTILIZATION THROUGH ULTRAFILTRATION AND NANOFILTRATION INTEGRATED MEMBRANE PROCESSES

Study on the coagulation treatment of activated dye wastewater

Treatment of wastewater from acrylonitrile industries with combined processes of adsorption oxidation, nanofiltration and adsorption

Pilot-scale Study on Advanced Treatment of Printing and Dyeing Wastewater by Coagulation Process

Case application of a combined treating process on azo dye wastewater

Study on Treatment of the Real Silk Print and Dyeing Wastewater with the Anaerobic Biotechnology under Ambient Temperature

Design and Operation of Treatment of Textile Printing and Dyeing Wastewater by Coagulation-hydrolytic Acidification-Aerobe Process

Treatment of High Concentration Wastewater in Polyacrylamide Production by Complex Coagulation Process

Pretreatment of Wastewater in Amine C Acid Manufacture by Coagulation-Catalytic Oxidation

Experimental study on the treatment process of wastewater in a printing and dyeing industrial park

Study on treatment of dyeing wastewater by combined process of biological micro-electrolysis

Treatment of light polluted wastewater from cotton knitting dyeing and finishing by coagulation-ozone oxidation process with wastewater source separation

High Concentration Dyeing Waste Water Pretreatment by Fe-C Micro-Electrolysis

Advanced Treatment of Cotton Knit Goods Dyeing Wastewater by Nanofiltration Membrane

Treating High COD Dyeing Wastewater via a Regenerative Sorption-Oxidation Process Using a Nano-Pored Activated Carbon

Study on Treatment of N-butylaniline Wastewater Using New Macroporous Resin NG-13