Effect of Ni Substitution on Structural Stability, Micromorphology, and Electrochemical Performance of Li2MnSiO4/C Cathode Materials

Hui Deng,Shi-Xi Zhao,Xia Wu,Lei Wei,Yu-Feng Deng,Ce-Wen Nan

DOI: https://doi.org/10.1039/c6ra22357e

IF: 4.036

2016-01-01

RSC Advances

Abstract:Li2Mn1−xNixSiO4/C samples doped with different amounts of Ni show improved performances, especially the optimal capacity appears in the 5.0% Ni sample.

What problem does this paper attempt to address?

Influence of Mo addition on the structural and electrochemical performance of Ni-rich cathode material for lithium-ion batteries

Tahir Sattar,Seung-Hwan Lee,Bong-Soo Jin,Hyun-Soo Kim

DOI: https://doi.org/10.1038/s41598-020-64546-8

2020-05-22

Abstract:Molybdenum modified LiNi0.84Co0.11Mn0.05O2 cathode with different doping concentrations (0-5 wt.%) is successfully prepared and its electrochemical performances are investigated. It is demonstrated that molybdenum in LiNi0.84Co0.11Mn0.05O2 has a positive effect on structural stability and extraordinary electrochemical performances, including improved long-term cycling and high-rate capability. Among all samples, the 1 wt. % molybdenum LiNi0.84Co0.11Mn0.05O2 delivers superior initial discharge capacity of 205 mAh g-1 (0.1 C), cycling stability of 89.5% (0.5 C) and rate capability of 165 mAh g-1 (2 C) compared to those of others. Therefore, we can conclude that the 1 wt. % molybdenum is an effective strategy for Ni-rich LiNi0.84Co0.11Mn0.05O2 cathode used in lithium ion batteries.
Enhanced Electrochemical Performance of Li1.2Mn0.54Ni0.13Co0.13O2 Cathode Material Coated with Li+-conductive Li2SiO3 for Lithium Ion Batteries

Le Zhou

DOI: https://doi.org/10.1016/j.jallcom.2017.05.328

IF: 6.2

2017-01-01

Journal of Alloys and Compounds

Abstract:Materials of Li1.2Mn0.54Ni0.13Co0.13O2 coated with different amounts of Li+-conductive Li2SiO3 (1.5, 3.0, 4.5 wt%) were synthesized through an isochronous lithium source method. The structures and morphologies of all samples exhibited no apparent changes after being coated with Li2SiO3. Electrochemical tests demonstrated that the initial Coulombic efficiency, cycle capacity retention and rate performance were improved. Especially for the 3 wt% Li2SiO3-coated sample, its initial Coulombic efficiency was increased by 5.2% (81.3%) compared with the pristine state (76.1%). After 100 cycles at 1 C, it maintained a discharge capacity of 142 mAh g(-1) with the retention of 85.1%, which is much better than the bare Li1.2Mn0.54Ni0.13Co0.13O2 (121.9 mAh g(-1) and 77.5%). In addition, the rate performance was also greatly enhanced under high current density. The cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) suggested that the enhanced electrochemical performance mainly benefited from the protective function of the coating layer of Li2SiO3 and its three-dimensional path for Li+ transmission in the structure, which would stabilizes the structure and accelerates the rate of Li+ migration respectively. (C) 2017 Elsevier B.V. All rights reserved.
Effect of Ti ion doping on electrochemical performance of Ni-rich LiNi0.8Co0.1Mn0.1O2 cathode material

Dengke Zhang,Yan Liu,Lei Wu,Liwei Feng,Shuangling Jin,Rui Zhang,Minglin Jin

DOI: https://doi.org/10.1016/j.electacta.2019.135086

IF: 6.6

2019-12-01

Electrochimica Acta

Abstract:The effects of various Ti concentrations doping on the electrochemical properties of LiNi0.8Co0.1Mn0.1O2 (NCM 811) sample were systematically studied. The XRD, EDS and XPS analyses indicated that the Ti-ion was substituted the occupied sites of Li and transition metal on the crystal structure. It also led to the increase of lithium interlayer spacing and the decrease of transition metal interlayer slab. The secondary particle size distribution of the 0.005 mol Ti-doped in LiNi0.8Co0.1Mn0.1O2 approximated to normal distribution. It showed multi-layer performance with high capacity (214.9 mAh g−1 at 0.1C), good rate performance (165.02 mAh g−1 at 1 C, 136.9 mAh g−1 at 5 C) and more excellent cyclic stability (77.01% after 150 t h at 1 C and 86.54% after 50 t h at 5 C). TEM studies revealed that the structural degradation on NCM 811 primary nano-particle could be effectively suppressed by the effect of Ti ions doped. The results demonstrated that doping of Ti content had superior advantages for LiNi0.8Co0.1Mn0.1O2 cathodes.

electrochemistry
Effect of Mn Doping on the Structure and Electrochemical Performance of LiNi0.7Co0.3O2

SHI Xiu-juan,LI Xin-lu,ZHENG Yong-ping,KANG Fei-yu

DOI: https://doi.org/10.3969/j.issn.1001-1579.2007.01.004

2007-01-01

Abstract:The precursor of LiNi0.7Co0.3-xMnxO2(0≤x≤0.15) was synthesized by sol-gel method.XRD,XPS,SEM and galvanostatic chargedischarge methods were used to study the structure and electrochemical performance of the final products.With the increasing of Mn content,the lattice parameters of the products increased and the degree of ordered layered structure became weak.The initial specific discharge capacities(175～189 mAh/g)and capacity retention(92%)after 30 cycles of LiNi0.7Co0.3-xMnxO2(0.02≤x≤0.07) were better than those of blank sample LiNi0.7Co0.3O2(170 mAh/g,86%).The initial speci-fic discharge capacity of LiNi0.7Co0.25Mn0.05O2(189 mAh/g) was the highest and its capacity retention after 30 cycles was 94%.The experimental results showed that Mn doping in small quantity was effective to improve the cycle stability and reversible capacity of the material.
Improving the Structure Stability and Electrochemical Performance of Li2MnSiO4/C Cathode Materials by Ti-doping and Porous Microstructure

Xia Wu,Shi-Xi Zhao,Lei Wei,Hui Deng,Ce-Wen Nan

DOI: https://doi.org/10.1016/j.jallcom.2017.11.230

IF: 6.2

2018-01-01

Journal of Alloys and Compounds

Abstract:Li2MnSiO4 cathode material suffers from structure collapse and thus rapid capacity fading during cycling. Here, we employed the stable [TiO6] ligands as a local pillaring framework to improve the structural stability. Porous Li2MnSi1-xTixO4/C nanoparticles were successfully synthesized by employing SBA-15 as Si source. Rietveld refinement revealed Ti substitution caused the phase composition transition (partial Pmnb to Pmn2(1) phase), which contributed to higher charge/discharge capacity. XPS confirmed the positions of Ti4+ and the formation of [TiO6] octahedrons. 15 mol% Ti doped sample (S-LMST) showed a highest specific surface area of 114.25 m(2) g(-1) and delivered a highest initial discharge capacity of 182.7 mAh g(-1) under 1.5-4.8 V. Interestingly, S-LMST electrode presented excellent cycling stability, especially retaining similar to 94% of initial discharge capacity after 8th cycles, while pristine Li2MnSiO4 only retained similar to 55%. Additionally, S-LMST electrode exhibited higher discharge capacity under lower cut-off voltage. The maximal initial discharge capacity can reach to 259.7 mAh g(-1) in 1.5-4.6 V. The enhanced cycling stability can be mainly ascribed to the pillaring effect of [TiO6] octahedrons and the decreased charge transfer resistance, as well as the improved Li+ diffusion coefficient due to porous structure. (C) 2017 Elsevier B.V. All rights reserved.
Effects of Nb substitution on structure and electrochemical properties of LiNi0.7Mn0.3O2 cathode materials

Zhifeng Li,Chuiyi Luo,Chunxiang Wang,Guoxiang Jiang,Jun Chen,Shengwen Zhong,Qian Zhang,Dong Li

DOI: https://doi.org/10.1007/s10008-018-3975-2

IF: 2.747

2018-05-23

Journal of Solid State Electrochemistry

Abstract:Nb-doped cathode materials with the formula Li(Ni0.7Mn0.3)1−xNbxO2 (x = 0, 0.01, 0.02, 0.03, 0.04) have been prepared successfully by calcining the mixtures of LiOH·H2O, Nb2O5, and Ni0.7Mn0.3(OH)2 precursor formed through a simple continuous co-precipitation method. The effects of Nb substitution on the crystal structure and electrochemical properties of LiNi0.7Mn0.3O2 were studied systematically by X-ray diffraction (XRD), scanning electron microscope (SEM), X-ray photoelectron spectroscopy (XPS), and various electrochemical measurements. The results show that the lattice parameters of the Nb substitution LiNi0.7Mn0.3O2 samples are slightly larger than that of pure LiNi0.7Mn0.3O2, and the basic α-NaFeO2 layered structure does not change with the Nb doping. What’s more, better morphology, lower resistance, and good cycle stability were obtained after Nb substitution. In addition, CV test exhibits that Nb doping results in lower electrode polarization and XPS results indicate that the valence of Mn kept constant but the component of Ni3+ decreased after doping. All the results indicate that Nb doping in LiNi0.7Mn0.3O2 is a promising method to improve the properties of Ni-rich lithium-ion batteries positive-electrode materials.

electrochemistry
Influence of Ti doping on microstructure and electrochemical performance of LiNi0.5Mn1.5O4 cathode material for lithium-ion batteries

Bo Zong,Yaqiang Lang,Shuhao Yan,Ziyao Deng,Jiajia Gong,Jianling Guo,Li Wang,Guangchuan Liang

DOI: https://doi.org/10.1016/j.mtcomm.2020.101003

IF: 3.8

2020-09-01

Materials Today Communications

Abstract:LiNi0.5Mn1.5O4 cathode material has been synthesized by a combined coprecipitation-hydrothermal method followed by high-temperature calcination. Ti doping was achieved via acetic acid glacial assisted sol-gel method by using titanium(IV) butoxide as Ti source. The effects of different Ti doping contents on the structure, morphology and electrochemical properties of LiNi0.5Mn1.5O4 materials were systematically investigated. The as-synthesized samples were characterized by XRD, FT-IR, SEM, TEM, XPS, EIS and constant-current charge/discharge test. It is found that although Ti doping can effectively inhibit the formation of LixNi1-xO impurity phase, excessive Ti doping results in the appearance of Li2TiO3 secondary phase. SEM observation shows that Ti doping can improve the crystallinity of particles, and particle size shows a gradual increasing trend with Ti doping content. LiNi0.5Mn1.5O4 material doped with 3% Ti shows high phase purity and crystallinity, appropriate Mn3+ content and particle size with uniform distribution, thereby leading to its optimal electrochemical performance. Its discharge capacity at 10 C rate can reach 127.3 mA h g−1, and capacity retention rate can reach 91.7 % after 200 cycles at 1C and 25 °C. Post-mortem analysis shows that appropriate Ti doping can efficiently ameliorate electrolyte decomposition and other side reactions, thus leading to the formation of thinner SEI/CEI layer on electrode surface, and then better cycling performance achieved.

materials science, multidisciplinary
Enhanced Electrochemical Performance of the LiNi 0.5 Mn 1.5 O 4 Cathode Material by the Construction of Uniform Lithium Silicate Nanoshells

Yuan Zhang,Jiahao Xu,Shaoxiong Fu,Yuhan Bian,Yaping Wang,Li Wang,Guangchuan Liang

DOI: https://doi.org/10.1021/acsami.2c20224

2022-12-25

Abstract:In order to alleviate the rapid capacity decay caused by the instability of the crystal structure and electrode/electrolyte interface, a series of Li(2)SiO(3)-coated LiNi(0.5)Mn(1.5)O(4) materials have been prepared via the lithium acetate-assisted sol-gel method followed by a short-term calcination process. During the sol-gel process, TEOS is hydrolyzed, condensed, and polymerized with the assistance of lithium acetate to form a Li^(+)-embedded [Si-O-Si](n) network structure to ensure the...

materials science, multidisciplinary,nanoscience & nanotechnology
Effects of Abundant Co Doping on the Structure and Electrochemical Characteristics of LiMn1.5Ni0.5−xCoxO4

H. M. Wu,J. P. Tu,Y. F. Yuan,J. Y. Xiang,X. T. Chen,X. B. Zhao,G. S. Cao

DOI: https://doi.org/10.1016/j.jelechem.2007.04.016

IF: 4.598

2007-01-01

Journal of Electroanalytical Chemistry

Abstract:The structure and electrochemical properties of LiMn1.5Ni0.5−xCoxO4 (0.0⩽x⩽0.5) cathodes for lithium ion batteries were investigated by means of X-ray diffraction (XRD), scanning electron microscopy (SEM), cyclic voltammetry (CV) and galvanostatic charge–discharge tests. Cathode materials with different Co contents which were synthesized by a spray-drying method showed a single-phase spinel structure without any impurity. The XRD data reveal that the lattice parameter decreases and the structure stability is improved on increasing the amount of Co substitution. Cyclic voltammetric studies indicated three voltage regions of electrochemical activity, the three pairs of peaks related to the redox couples Mn3+/Mn4+, Ni2+/Ni4+ and Co3+/Co4+. The amount of Co doping induced a variation in the CV peak intensity and charge/discharge plateau length. Galvanostatic tests showed that with an increase in the value of x in the composition, the cycling stability was improved significantly at high temperature. For the LiMn1.5Ni1.4Co0.1O4, the initial capacity still had a high value of over 123mAhg−1, and after 20 cycles, it retained over 115mAhg−1 at 55°C. When the value of x is 0.4 or 0.5, after cycling, the capacity nearly did not nearly fade between 3.20 and 4.95V at 55°C.
Synthesis and structural stability of Cr-doped Li2MnSiO4/C cathode materials by solid-state method

Cheng Hong-Mei,Zhao Shi-Xi,Wu Xia,Zhao Jian-Wei,Wei Lei,Nan Ce-Wen

DOI: https://doi.org/10.1016/j.apsusc.2017.10.045

IF: 6.7

2018-01-01

Applied Surface Science

Abstract:The crystal structure of the Li2MnSiO4 cathode material would collapse during the charge and discharge process because of that the Mn-O coordination polyhedron changed from [MnO4] into [MnO6] in the process of Mn+2 to Mn+4, but the Cr element could remain [CrO4] crystal ligand from Cr+2 to Cr+4, so Cr element substitution was used to improve the structural stability of the Li2MnSiO4 cathode material. In this work, Li-2 Mn1-xCrxSiO4/C nanocomposites were synthesized by solid-state method. XRD, SEM and TEM observations show that the as-prepared Li2Mn1-xCrxSiO4/C materials presents an orthorhombic crystal structure (S.G. Pmn2(1)), the particle size of Li2Mn1-xCrxSiO4/C powder ranges from 50 to 100 nm. The XRD and XPS results indicate that Cr+2 is successfully doped into Li2MnSiO4 lattice and has well compatibility with Li2MnSiO4. The electrochemical results display that Li2Mn92.5%Cr7.5%SiO4/C exhibits significantly enhanced cycle stability and discharge capability. The initial discharge capacity of the Li2Mn92.5%Cr7.5%SiO4/C sample is 255 mAh g(-1), and the discharge capacity was still about 60 mAh g(-1) after 50 cycles. Furthermore, the XRD patterns, TEM images and Raman analysis reveal that the Cr doping enhances the structural stability of Li2Mn1-xCrxSiO4/C and improves the electrochemical activity of the cathode. Thus, the Li2Mn92.5%Cr7.5%SiO4/C have shown potential applications for lithium ion batteries. (C) 2017 Elsevier B.V. All rights reserved.
Insight into the effect of Nb5+ on the crystal structure and electrochemical performance of the Li-rich cathode materials

Ziqi Xie,Xiangchen Wu,Yueying Zhang,Guanting Li,Furui Ma,Wenchao Yan,Yanli Chen,Faqiang Li,Mingdong Zhou

DOI: https://doi.org/10.1016/j.jelechem.2022.116762

IF: 4.598

2022-10-01

Journal of Electroanalytical Chemistry

Abstract:The Nb-doped Li-rich materials Li1.2(Mn0.54Ni0.13Co0.13)1-xNbxO2 are synthesized via a modified one-step sol–gel and high-temperature calcination method. The crystal structure and surface morphology of synthesized materials are analyzed through X-ray diffraction, scanning electron microscopy, transmission electron microscopy, and X-ray photoelectron spectroscopy. After optimization, the Nb-0.02 sample exhibits exceptional electrochemical performance, that is, the initial discharge-specific capacity of 305.9 mAh g−1 at 0.08 C and 202.6 mAh g−1 at 1 C, respectively. Combined with the result of the density of states (DOS), we found that the doping of Nb5+ into the crystal structure significantly reduces the value of the band gap of the Li2MnO3 (1.07 eV). At the same time, the strengthened Nb–O bond and Nb5+ with big ionic radius, regulate the degree of oxygen ion participation in the redox reaction and enhance the electrochemical performance of the Li-rich materials.

chemistry, analytical,electrochemistry
Structural and electrochemical characterization of LiMn2-2xLixNixO4 (0 <= x <= 0.1) cathode materials

J Tu,GS Cao,DG Zhuang,XB Zhao

IF: 1.292

2005-01-01

Journal of Inorganic Materials

Abstract:Lithium and nickel co-doped LiMn2-2xLixNixO4 cathode materials (x= 0, 0.03, 0.05, 0.075, 0.1) were synthesized by a high temperature solid-state reaction route. The microstructures and morphologies of the samples were characterized by X-ray powder diffraction, X-ray absorption fine structure analysis and field emitted scanning electronic microscopy. The bond lengths of the MnO6 octahedrons and the electrochemical performances in both room temperature and elevated temperature (55 degrees C) were characterized and discussed in comparison with LiMn2O4 spinel. The result reveals that LiMn2-2xLixNixO4 samples have a good reversibility. It is suggested that the co-doping of lithium and nickel in LiMn2O4-based compounds could stabilize the spinel structure and improve the capacity retention of the cathode materials.
Improving the Performance of LiNi 0.925 Co 0.065 Mn 0.01 O 2 via Ti 4+ & Nb 5+ Co-Modifications

Yihan Tang,Shuaishuai Chen,Ming Wan,Hua Li,Qingliang You,Zhenlian Chen,Zhe Peng,Deyu Wang

DOI: https://doi.org/10.1021/acsami.4c10933

IF: 9.5

2024-09-14

ACS Applied Materials & Interfaces

Abstract:Ni-rich layer-structured materials are some of the most promising cathodes owing to their attractive reversible capacity and cost-effectiveness. When the Ni content is increased to 90% and higher, mechanical deterioration becomes serious and leads to accelerated cyclic degradation, since removable Li^(+) is ∼0.85, accompanied by large lattice variation during operation. Here, we investigate the influences of Ti^(4+) bulky substitution, Nb^(5+) surface treatment, and their coutilization on the...

materials science, multidisciplinary,nanoscience & nanotechnology
Uncovering the Role of Nb Modification in Improving the Structure Stability and Electrochemical Performance of LiNi 0.6 Co 0.2 Mn 0.2 O 2 Cathode Charged at Higher Voltage of 4.5 V

Siyang Liu,Xiang Chen,Jiayue Zhao,Junming Su,Congcong Zhang,Tao Huang,Jianhua Wu,Aishui Yu

DOI: https://doi.org/10.1016/j.jpowsour.2017.11.037

IF: 9.2

2018-01-01

Journal of Power Sources

Abstract:Ni-rich cathode materials attract ongoing interest due to their high specific capacity (similar to 200 mAh g(-1)). However, these materials suffer rapid capacity fading when charged to a high voltage and cycled at elevated temperature. In this study, we propose a facile method to reconstruct the surface structure of LiNi0.6Co0.2Mn0.2O2 via Nb modification, which integrates the merits of partial Nb5+ doping in the pristine structure and surface Li3NbO4 coating. The obtained results from Rietveld refinement and high resolution transmission electron microscopy confirm that Nb5+ is partially doped into Li+ sites within the surface lattice. Further ex-situ powder X-ray diffraction and kinetic analysis using electrochemical impedance spectroscopy reveal that Nb modification stabilizes the layered structure and facilitates the charge transfer process. Owing to the robust surface structure, 1 mol% Nb modified LiNi0.6Co0.2Mn0.2O2 delivers a discharge capacity of 160.9 mAh g(-1) with 91% capacity retention after 100 cycles at 3.0-4.5 V, whereas the discharge capacity of the pristine sample drops to 139.6 mAh g-1, corresponding to 78% of its initial value. The presence of Nb5+ in the Li layer exhibits positive effects on stability of layered structure, and the surface Li3NbO4 coating layer increases interfacial stability, which results in superior electrochemical performance.
Investigation of Li 3 PO 4 Coating and Nb 5+ Doping Effect on the Crystal Structure and Electrochemical Properties of Ni-Rich LiNi 0.85 Co 0.05 Mn 0.10 O 2 Cathode

Feng Chen,Xiao Ma,Xinqi Zhu,Weilong Dai,Congcong Yao,Zhigang Chen,Chengbao Liu

DOI: https://doi.org/10.1149/1945-7111/ac24b8

IF: 3.9

2021-09-01

Journal of The Electrochemical Society

Abstract:To overcome the poor rate capacity and weak cycling performance of Ni-rich cathode materials, the Li3PO4 coating and Nb5+ doping modified LiNi0.85Co0.05Mn0.10O2 series samples were prepared by using the co-precipitation and the sol-gel methods in this work. And the X-ray diffraction, transmission electron microscopy, field emission scanning electron microscopy, energy dispersive spectroscopy, X-ray photoelectron spectroscopy and electrochemical characterization were performed to comprehensively assess the effect of Li3PO4 coating and Nb5+ doping on the morphology, structure and electrochemical properties of LiNi0.85Co0.05Mn0.10O2. The results showed that the Li3PO4 nanoparticles were covered on the surface of cathode with success and the Nb5+ ions were inserted into the crystal structure with uniformity. In comparison with the bare LiNi0.85Co0.05Mn0.10O2, the cathodes after Li3PO4 coating and Nb5+ doping demonstrated the better electrochemical properties in terms of rate capability, cycling performance and thermal stability. The 2 wt% Li3PO4 coated Li(Ni0.85Co0.05Mn0.10)0.99Nb0.01O2 delivered the capacity retention of 92.0% at 25 °C and 90.8% at 45 °C after 300 cycles at 1C rate respectively, much larger than those (83.5% and 80.1%) of the bare one. These results indicated the Li3PO4 coating and Nb5+ doping co-modification could satisfy the performance requirement of maintaining the cycling stability for Ni-rich cathodes.

electrochemistry,materials science, coatings & films
Effect of Molybdenum Substitution on Electrochemical Performance of Li[Li0.2Mn0.54Co0.13Ni0.13]O-2 Cathode Material

Wei Pan,Wenjie Peng,Huajun Guo,Jiexi Wang,Zhixing Wang,Hangkong Li,Kaimin Shih

DOI: https://doi.org/10.1016/j.ceramint.2017.07.232

IF: 5.532

2017-01-01

Ceramics International

Abstract:Molybdenum doping is introduced to improve the electrochemical performance of lithium-rich manganese-based cathode material. X-ray diffraction (XRD) results illustrate that the crystallographic parameters a, c and lattice volume V become larger with the increase of Mo content. The scanning electron microscope (SEM) shows that the molybdenum substitution increases the crystallinity of the primary particles. When evaluated as cathode material, the as-prepared Li[Li0.2Mn0.54-x/3Ni0.13-x/3Co0.13-x/3Mox]O2 (x = 0.007) delivers a discharge capacity of 155.5mAhg−1 at 5C (1C = 250mAg−1) and exhibits the capacity retention of 81.8% at 1C after 200 cycles. The results of cyclic voltammetry (CV) and electronic impedance spectroscopy (EIS) tests reflect that the molybdenum substitution is able to significantly reduce the electrode polarization and lower the charge-transfer resistance. Within appropriate amount of Mo doping, the lithium ion diffusion coefficient of the material can reach to 8.92 × 10–15cm2s−1, which is ~ 30 times higher than that of pristine materials (2.65 × 10–16cm2s−1).
Synthesis and electrochemical performance of Mo-doped LiNi0.5Mn1.5O4 cathode material

Fanfei Zeng,Yu Zhang,Zhongcai Shao

DOI: https://doi.org/10.1080/10426914.2022.2075885

IF: 4.7832

2022-05-24

Materials and Manufacturing Processes

Abstract:The Mo-doped LiNi 0.5 Mn 1.5 O 4 material has been successfully synthesized by the freezing precipitation method, and the effect of different doping amounts on the properties of LiNi 0.5 Mn 1.5 O 4 material has been studied. Texting has included XRD, SEM, first charge and discharge curves, cycle performance, rate cycle, CV analysis, and EIS analysis. The experimental results show that the Mo-doping material shows superior performance when the doping amount is 1%, and this amount ensures the highest capacity of the sample. The capacity is 120.1 mAh g −1 at 0.1 C (initial discharge), with which the particle size and the dispersion are uniform. After 50 cycles, the discharge capacity is 118.3 mAh g −1 at 0.1 C, and the capacity retention rate is 98.5%. These results reveal that Mo-doped LiNi 0.5 Mn 1.5 O 4 contributes to the outstanding electrochemical performance of the LiNi 0.5 Mn 1.5 O 4 .

materials science, multidisciplinary,engineering, manufacturing
Synthesis and characterization of abundant Ni-doped LiNixMn2-xO4 (x = 0.1-0.5) powders by spray-drying method

H.M. Wu,Jiangping Tu,Xuean Chen,Deqin Shi,Xinbing Zhao,Gaoshao Cao

DOI: https://doi.org/10.1016/j.electacta.2005.11.034

IF: 6.6

2006-01-01

Electrochimica Acta

Abstract:The structure and electrochemical properties of LiNixMn2−xO4 cathode materials for lithium ion batteries were studied by the means of X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscope (TEM), cyclic voltammetry, and galvanostatic charge–discharge tests. The cathodes with different Ni contents (LiNixMn2−xO4, x=0.1, 0.2, 0.3, 0.4, and 0.5) were synthesized by a spray-drying method and showed a single-phase spinel structure without any impurity. The amount of Ni has a large effect on the electrochemical characteristics. Capacity values of different voltage ranges (4- and 5-V ranges) change obviously with amount of Ni-doped. Also, the total discharge capacities increase with the Ni content, and all of them have good cycle stability.
Structure, performance, morphology and component transformation mechanism of LiMn0·8Fe0·2PO4/C nanocrystal with excellent stability

Ting Luo,Tao-tao Zeng,Shi-lin Chen,Rong Li,Run-zhen Fan,Han Chen,Shao-chang Han,Chang-ling Fan

DOI: https://doi.org/10.1016/j.jallcom.2020.155143

IF: 6.2

2020-09-01

Journal of Alloys and Compounds

Abstract:LiMn0·8Fe0·2PO4/C nanocrystal was synthesized by a facile solvothermal reaction. The pH and concentration of lithium ion are changing with the increase of LiOH. The deposition law of precursor ions is investigated, in which Li+ exceeds the necessary stoichiometric ratio even in the lowest amount of LiOH. Mn2+ and Fe2+ possess the similar fixation tendency, and 87.88% Mn2+ are deposited at the pH of 3.30. However, nearly all Fe2+ are precipitated in a wide pH range (2.96–3.85). The morphology changes from nanosheet to nanoellipsoid under the cooperation of pH and precursor ions. The components of LiMnPO4 and LiFePO4 in LiMn0·8Fe0·2PO4/C are predicted and their contributions to capacity are close to the actual results. Sample S-2.6 delivers the optimum electrochemical performance with a capacity of 150.9, 134.6 and 107.5 mA h·g−1 at 0.05, 1 and 5 C, respectively. It also exhibits high reversibility, low charge transfer resistance (41.2 Ω) and excellent diffusion coefficient (5.38 × 10−11 cm2·s−1). The capacity retention of sample S-2.6 reaches 96.03% after 200 cycles and it maintains original structure without obvious change according to the ex-situ XRD results. The morphology of the cycled cathode film also maintains its integrity without evident cracks. The low dissolution of Mn2+ and Fe2+ from LiMn0·8Fe0·2PO4/C shows the enhanced chemical stability.

materials science, multidisciplinary,chemistry, physical,metallurgy & metallurgical engineering
Al Substitution Induced Differences in Materials Structure and Electrochemical Performance of Ni-Rich Layered Cathodes for Lithium-Ion Batteries

Zheng-Yao Li,Hao Guo,Xiaobai Ma,Kai Sun,Dongfeng Chen,Linfeng He,Songbai Han

DOI: https://doi.org/10.1021/acs.jpcc.9b03597

2019-01-01

Abstract:Ni-rich layered oxides are very promising high energy density cathodes for lithium-ion batteries. A small amount of Ni, Co, and Mn is substituted by Al to study the structural evolution, electrochemical behaviors, and properties of Ni-rich cathodes. Neutron diffraction results demonstrate that Al substitution for Ni, Co, and Mn results in remarkable differences in materials structure and reduced the cation mixing with different degrees. The distinct differences in electrochemistry including rate capability, long-term cycling stability, average operating voltage, and polarization effect are systemically discussed, which can be ascribed to the material structural evolution. In contrast, LiNi0.6Co0.2Mn0.15Al 0.05O2 can deliver a very high specific capacity of 120 mAh g–1 at 10C and an 82.4% cycling stability after prolonged 500 cycles at 2C. This study offers a fundamental insight into optimizing the materials structure and composition of layered oxide cathodes with higher Ni content for lithium-ion batteries.

Effect of Ni Substitution on Structural Stability, Micromorphology, and Electrochemical Performance of Li2MnSiO4/C Cathode Materials

Influence of Mo addition on the structural and electrochemical performance of Ni-rich cathode material for lithium-ion batteries

Enhanced Electrochemical Performance of Li1.2Mn0.54Ni0.13Co0.13O2 Cathode Material Coated with Li+-conductive Li2SiO3 for Lithium Ion Batteries

Effect of Ti ion doping on electrochemical performance of Ni-rich LiNi0.8Co0.1Mn0.1O2 cathode material

Effect of Mn Doping on the Structure and Electrochemical Performance of LiNi0.7Co0.3O2

Improving the Structure Stability and Electrochemical Performance of Li2MnSiO4/C Cathode Materials by Ti-doping and Porous Microstructure

Effects of Nb substitution on structure and electrochemical properties of LiNi0.7Mn0.3O2 cathode materials

Influence of Ti doping on microstructure and electrochemical performance of LiNi0.5Mn1.5O4 cathode material for lithium-ion batteries

Enhanced Electrochemical Performance of the LiNi 0.5 Mn 1.5 O 4 Cathode Material by the Construction of Uniform Lithium Silicate Nanoshells

Effects of Abundant Co Doping on the Structure and Electrochemical Characteristics of LiMn1.5Ni0.5−xCoxO4

Synthesis and structural stability of Cr-doped Li2MnSiO4/C cathode materials by solid-state method

Insight into the effect of Nb5+ on the crystal structure and electrochemical performance of the Li-rich cathode materials

Structural and electrochemical characterization of LiMn2-2xLixNixO4 (0 <= x <= 0.1) cathode materials

Improving the Performance of LiNi 0.925 Co 0.065 Mn 0.01 O 2 via Ti 4+ & Nb 5+ Co-Modifications

Uncovering the Role of Nb Modification in Improving the Structure Stability and Electrochemical Performance of LiNi 0.6 Co 0.2 Mn 0.2 O 2 Cathode Charged at Higher Voltage of 4.5 V

Investigation of Li 3 PO 4 Coating and Nb 5+ Doping Effect on the Crystal Structure and Electrochemical Properties of Ni-Rich LiNi 0.85 Co 0.05 Mn 0.10 O 2 Cathode

Effect of Molybdenum Substitution on Electrochemical Performance of Li[Li0.2Mn0.54Co0.13Ni0.13]O-2 Cathode Material

Synthesis and electrochemical performance of Mo-doped LiNi0.5Mn1.5O4 cathode material

Synthesis and characterization of abundant Ni-doped LiNixMn2-xO4 (x = 0.1-0.5) powders by spray-drying method

Structure, performance, morphology and component transformation mechanism of LiMn0·8Fe0·2PO4/C nanocrystal with excellent stability

Al Substitution Induced Differences in Materials Structure and Electrochemical Performance of Ni-Rich Layered Cathodes for Lithium-Ion Batteries