Abstract:CONSPECTUS: To tackle the foreseen energy crisis and serious environmental problem caused by conventional energy resources, solar cells, or photovoltaics (PV), a technology that can directly convert sunlight to electricity has been considered to be one of the most important and cost-effective clean energy techniques that benefit the environment. So far, silicon-based PVs have dominated the market due to mature fabrication techniques and their relatively good power conversion efficiency (PCE) and excellent stability. In the past decades, metal halide perovskite PVs have been a major direction of current PV research owing to their intriguing optoelectronic performance. The record PCE of perovskite PV cells has unprecedently increased from an original 3.8 to 25.5%. The typical structure of a photovoltaic perovskite is ABX(3), where A refers to a monovalent cation such as methylammonium (MA(+)), cesium (Cs+), or formamidinium (FA(+)); B refers to a divalent cation such as Pb2+ or Sn2+; and X refers to a halide anion. In general, a perovskite PV device consists of an active layer of the perovskite absorber, which is connected by a hole-transporting layer (HTL) and an electron-transporting layer (ETL). In the beginning, the strategies to improve the PCEs mainly focused on developing an effective method to grow a smooth and continuous polycrystalline film. After the improvement of the baseline PCE of the perovskite PVs, various techniques were employed to reduce the defects of perovskite formed at grain boundaries and surfaces, further pushing the PCEs of perovskite PV devices to over 20%. In the meantime, the discovery of suitable and low-cost interfacial materials such as electron-transporting materials and hole-transporting materials has appealed to the attention of the perovskite research community to accelerate the commercialization of the perovskite PVs. In this Account, we start from our efforts to develop facile and effective fabrication strategies to obtain smooth and continuous polycrystalline perovskite thin films, including vapor-assisted and moisture-assisted perovskite crystal growth. The strategies and the in-depth mechanisms of preventing the formation of specific detrimental defects accumulated at grain boundaries or the surface are also portrayed by designing various passivation molecules with certain functional groups, such as carbonyl groups, amine groups, or sulfonic groups. Some systematically designed electron- or hole-transporting materials to improve the charge extraction and collection efficiency in perovskite PV devices are discussed as well. Finally, future perspectives for further enhancing the long-term stability and PCE are proposed to accelerate the commercialization of perovskite PV devices in the next decade.

Improving the photovoltaic performance of perovskite solar cells with acetate

Acetate Salts As Nonhalogen Additives to Improve Perovskite Film Morphology for High-Efficiency Solar Cells

Acetic Acid Assisted Crystallization Strategy for High Efficiency and Long-Term Stable Perovskite Solar Cell

Ultrahigh open-circuit voltage for high performance mixed-cation perovskite solar cells using acetate anions

Synergistic Improvement of Perovskite Film Quality for Efficient Solar Cells Via Multiple Chloride Salt Additives

High‐Performance Inverted Planar Heterojunction Perovskite Solar Cells Based on Lead Acetate Precursor with Efficiency Exceeding 18%

Tailored Key Parameters of Perovskite for High-Performance Photovoltaics

Improving the photovoltaic performance of planar heterojunction perovskite solar cells by mixed solvent vapor treatment

Polymer-modified halide perovskite films for efficient and stable planar heterojunction solar cells.

Using low‐cost additive to improve perovskite crystallization for efficient solar cells

Effects of Methylammonium Acetate on the Perovskite Film Quality for the Perovskite Solar Cell

Interfacial Post-Treatment for Enhancing the Performance of Printable Carbon-Based Perovskite Solar Cells

Benefitting from Synergistic Effect of Anion and Cation in Antimony Acetate for Stable CH3 NH3 PbI3 -Based Perovskite Solar Cell with Efficiency Beyond 21

Benefitting from Synergistic Effect of Anion and Cation in Antimony Acetate for Stable CH3NH3PbI3-Based Perovskite Solar Cell with Efficiency Beyond 21%

Improved Photovoltaic Performance from High Quality Perovskite Thin Film Grown with the Assistance of PC 71 BM

Enhanced Efficiency and Stability of Perovskite Solar Cells by Synergistic Effect of Magnesium Acetate Introducing into CH3NH3PbI3

Acetamidinium Based 2D Alternating Cation Perovskite for Efficient Solar Cells

Methylammonium Acetate As an Additive to Improve Performance and Eliminate J-V Hysteresis in 2D Homologous Organic-Inorganic Perovskite Solar Cells

Synergetic Effect on Enhanced Photovoltaic Performance of Spray-Coated Perovskite Solar Cells Enabled by Additive Doping and Antisolvent Additive Spraying Treatment

Potassium Acetate Passivated SnO2 Interface for High‐Efficiency Two‐Step Deposited Perovskite Solar Cells

Efficiency Enhancement of Perovskite Solar Cells by Forming a Tighter Interface Contact of C/CH3NH3PbI3