The Duong,Thuan Nguyen,Keqing Huang,Huyen Pham,Sunita Gautam Adhikari,Motiur Rahman Khan,Leiping Duan,Wensheng Liang,Kean Chern Fong,Heping Shen,Anh Dinh Bui,Azul Osorio Mayon,Thien Truong,Grace Tabi,Viqar Ahmad,Sachin Surve,Jingnan Tong,Teng Kho,Thanh Tran‐Phu,Teng Lu,Jianghui Zheng,Ulrich W. Paetzold,Uli Lemmer,Anita Ho Baillie,Yun Liu,Gunther Andersson,Thomas White,Klaus Weber,Kylie Catchpole

Abstract:Adding 4‐methylphenethylammonium chloride into a 3D perovskite precursor results in better film quality with larger grains. Quasi‐2D perovskites are formed and passivate defects at the grain boundaries. The perovskite surface chemistry is modified, and the surface energies become more favorable for hole extraction. This approach leads to methylammonium‐free perovskite solar cells with a champion steady‐state efficiency of 23.7% and excellent stability. Methylammonium (MA)‐free perovskite solar cells have the potential for better thermal stability than their MA‐containing counterparts. However, the efficiency of MA‐free perovskite solar cells lags behind due to inferior bulk quality. In this work, 4‐methylphenethylammonium chloride (4M‐PEACl) is added into a MA‐free perovskite precursor, which results in greatly enhanced bulk quality. The perovskite crystal grains are significantly enlarged, and defects are suppressed by a factor of four upon the incorporation of an optimal concentration of 4M‐PEACl. Quasi‐2D perovskites are formed and passivate defects at the grain boundaries of the perovskite crystals. Furthermore, the perovskite surface chemistry is modified, resulting in surface energies more favorable for hole extraction. This facile approach leads to a steady state efficiency of 23.7% (24.2% in reverse scan, 23.0% in forward scan) for MA‐free perovskite solar cells. The devices also show excellent light stability, retaining more than 93% of the initial efficiency after 1000 h of constant illumination in a nitrogen environment. In addition, a four‐terminal mechanically stacked perovskite‐silicon tandem solar cell with champion efficiency of 30.3% is obtained using this MA‐free composition. The encapsulated tandem devices show excellent operational stability, retaining more than 98% of the initial performance after 42 day/night cycles in an ambient atmosphere.

Methylammonium Acetate As an Additive to Improve Performance and Eliminate J-V Hysteresis in 2D Homologous Organic-Inorganic Perovskite Solar Cells

Effects of Methylammonium Acetate on the Perovskite Film Quality for the Perovskite Solar Cell

Methylammonium Chloride or Guanidinium Chloride As an Additive to Improve Performance of 2D Alternating Cation Perovskite Solar Cells: A Direct Comparison

Acetamidinium Based 2D Alternating Cation Perovskite for Efficient Solar Cells

Acetate Salts As Nonhalogen Additives to Improve Perovskite Film Morphology for High-Efficiency Solar Cells

Ionic Liquid As an Additive for Two-Step Sequential Deposition for Air-Processed Efficient and Stable Carbon-Based CsPbI2Br All-Inorganic Perovskite Solar Cells

Synergistic Effect of Additives on 2D Perovskite Film Towards Efficient and Stable Solar Cell

N ‐methyl‐2‐pyrrolidone Iodide as Functional Precursor Additive for Record Efficiency 2D Ruddlesden‐Popper (PEA) 2 (Cs) n −1 Pb n I 3 n +1 Solar Cells

Using low‐cost additive to improve perovskite crystallization for efficient solar cells

Improving Moisture/Thermal Stability and Efficiency of CH3NH3PbI3‐Based Perovskite Solar Cells Via Gentle Butyl Acrylate Additive Strategy

Enhanced Efficiency and Stability of Perovskite Solar Cells by Synergistic Effect of Magnesium Acetate Introducing into CH3NH3PbI3

A Functional Sulfonic Additive for High Efficiency and Low Hysteresis Perovskite Solar Cells

Unraveling Differences in the Effects of Ammonium/Amine-Based Additives on the Performance and Stability of Inverted Perovskite Solar Cells

Bulk Incorporation with 4‐Methylphenethylammonium Chloride for Efficient and Stable Methylammonium‐Free Perovskite and Perovskite‐Silicon Tandem Solar Cells

Additive-Regulated One-Step Dynamic Spin-Coating for Fabricating High-Performance Perovskite Solar Cells under High Humidity Conditions

2D Halide Perovskite Phase Formation Dynamics and Their Regulation by Co‐Additives for Efficient Solar Cells

Effects of Formamidinium and Bromide Ion Substitution in Methylammonium Lead Triiodide Toward High-Performance Perovskite Solar Cells

Crystallization Kinetics Control Enabled by a Green Ionic Liquid Additive toward Efficient and Stable Carbon-Based Mesoscopic Perovskite Solar Cells

Acetic Acid Assisted Crystallization Strategy for High Efficiency and Long-Term Stable Perovskite Solar Cell

Improved Performance and Stability of Quasi-Two-Dimensional Perovskite Solar Cells by Post-treatment with Acetaminophen

Methylammonium Chloride as a Double‐Edged Sword for Efficient and Stable Perovskite Solar Cells