Abstract:To reduce the environmental damage caused by waste rubber, crumb rubber concrete (CRC) was prepared by replacing some fine aggregates with crumb rubber. The effects of elevated temperature as well as crumb rubber content on the mechanical properties of the prepared CRC were studied. The crumb rubber contents were 0%, 10%, and 20%, while CRC was subjected to atmospheric temperatures (AT) of 300 °C, 500 °C, and 700 °C. The concrete without crumb rubber content was used as the control group at the atmospheric temperature. The mass loss, thermal conductivity characteristics, compressive strength, splitting tensile strength, axial compressive strength, elastic modulus, and stress-strain characteristics of CRC at elevated temperatures were studied. The experimental results show that: (1) With the increase in crumb rubber content and temperature, the cracks on the surface of the specimen gradually widen while the mass loss of the specimen increases. (2) With the increase in crumb rubber content and temperature, the cube compressive strength, splitting tensile strength, axial compressive strength, and elastic modulus of CRC decrease, yet the plastic failure characteristics of CRC are more obvious. (3) The influences of elevated temperature on strength and elastic modulus are as follows: splitting tensile strength > elastic modulus > axial compressive strength > cubic compressive strength. (4) With the increase in temperature, the stress-strain curve of the CRC tends to flatten, the peak stress decreases, and the corresponding peak strain significantly increases. With the increase in crumb rubber content, there is a great decrease in peak stress, yet the corresponding peak strain is basically the same. The use of CRC can be prioritized in applications that increase toughness rather than strength.

Recycled Concrete at Elevated High Temperature Duration

Residual mechanical properties of recycled aggregate concrete at elevated temperatures

Experimental study on dynamic behavior of concrete at elevated temperatures

Residual compressive stress‐strain relation of recycled aggregate concrete after exposure to high temperatures

Comparative study on the properties and high temperature resistance of self-compacting concrete with various types of recycled aggregates

Stress–strain characteristics of fire‐exposed recycled coarse aggregate concrete

Effect of glass fiber and high temperature on the mechanical properties of recycled aggregate concrete

Thermomechanical properties and microstructure of concrete made with recycled concrete aggregates after exposure to high temperatures

Thermal and residual mechanical profile of recycled aggregate concrete prepared with carbonated concrete aggregates after exposure to elevated temperatures

Influence of temperature on mechanical properties of recycled asphalt pavement aggregate and recycled coarse aggregate concrete

Dynamic Tensile Properties and Energy Dissipation of High-Strength Concrete after Exposure to Elevated Temperatures

Unlocking the role of recycled polymer fibres on dynamic fracture characteristics of concrete after exposure to elevated temperatures

Experimental study on the triaxial compression mechanical performance of basalt fiber-reinforced recycled aggregate concrete after exposure to high temperature

Experimental Study on the Mechanical Properties of Crumb Rubber Concrete after Elevated Temperature

Performance Degradation and Microscopic Analysis of Lightweight Aggregate Concrete after Exposure to High Temperature

Experimental Study on Mechanical Properties of Early-Aged Concrete after Exposure to High Temperatures

Experimental Study of Mechanical Properties of Normal-Strength Concrete Exposed to High Temperatures at an Early Age

Experimental Study on High Performance Recycled Concrete

Influence of Elevated Temperatures on the Compressive Strength of Concrete Made with Different Types of Aggregate

Experimental Research on High Temperature Resistance of Modified Lightweight Concrete after Exposure to Elevated Temperatures

Experimental study on mechanical property of crumb rubber concrete after elevated temperature