Signal Measurement and Control System in Micro Air Vehicle

纪凡,周兆英,王晓浩,吴怀宇,朱荣

DOI: https://doi.org/10.3321/j.issn:0254-3087.2003.06.018

2003-01-01

Abstract:[无可用摘要]

What problem does this paper attempt to address?

Survey of Wide Area Measurement System

鞠平,郑世宇,徐群,孙淑琴,畅广辉,范斗,吴峰,严登俊

DOI: https://doi.org/10.3969/j.issn.1006-6047.2004.07.006

2004-01-01

Abstract:WAMS(Wide Area Measurement System) is developed to meet the requirements of synchro-nization in time and wide area in space. With the application of GPS(Global Position System),the state measurement in the same time will be possible. The study on WAMS is reviewed. The struc-tures of WAMS are introduced,the principles of angle measurement and phase measurement are compared. Some application functions,such as fault recording,state estimation and angle monitoring,are discussed. Finally the study is foreseen. This project is supported by Excellent Young Teachers Program of MOE,P.R.China([2001]182).
Miniature Wireless Data Communication System for Micro Air Vehicles

魏强,周兆英,王晓浩,王广龙,朱荣,刘钦彦

DOI: https://doi.org/10.3321/j.issn:1000-0054.2002.11.008

2002-01-01

Abstract:A miniature wirelessdata communication system was developed for use in a micro air vehicle (MAV). This paper focuses on the attitude detector system which is small, light and accurate. The digital communication can provide better security, higher transmission rate and better quantity. Compared with traditional communication systems, this miniature wireless data communication system has better disturbance resistance and lower error probability (10-6) for distances up to 1 500 m. The communication system integrated with a miniature microelectromechanical system (MEMS) azimuthlevel detector was tested on a 3axis simulator which can simulate the real movement of an MAV. The results show that the miniature wirelessdata communication system reliably measures and transmits the attitude which can be used to control the MAV.
Research on multi-parameter measure and control technology based on wireless communication in combined environment testing

Yuanlai Zhou,Wen He,Runjie Shen,Min Liu

DOI: https://doi.org/10.4028/www.scientific.net/AMR.139-141.2207

2011-01-01

Advanced Materials Research

Abstract:Considering the requirement of the multi-parameter-combined environment testing device, a kind of multi-parameter measure and control system based on wireless communication technology was studied in this paper. First, the overall structure of the multi-parameter measure and control system based on wireless communication in combined environment device was put forward, which was made up of six control subsystems: a host computer, the centrifuge and dynamic balance system, the vibration and rectification system, the temperature system, the air pressure system and the sound pressure system. Then, the communication protocol and hardware structure of the multi-computer communication system based on wireless transmission were mainly studied. And software design technology of multi-parameter measure and control system was studied in succession. Finally, the five-parameter-combined environment testing was carried out. The experimental results show that the measure and control tasks of the combined environment testing can be well finished by the multi-parameter measure and control system.
Design and Hardware-in-the-loop Simulation of MUAV's Flight Control System

Chen Qingsong,Han Bo,LI Ping

DOI: https://doi.org/10.3969/j.issn.2095-1000.2006.05.012

2006-01-01

Abstract:This paper introduces the design and implementation of a control system of a mini unmanned aerial vehicle.The system,which employs DSP and CPLD as its core hardware,includes the circuitry models function in power supply,sensor data collection,serial communications interface expanding and motor controlling.And several software models such as sensor integration,attitude calculation and flight controlling are implemented on it.A hardware-inthe-loop simulation system is designed for the research of this flight controlling system.
Microphotography and Wireless Transmission System for Micro Aerial Vehicles

金敏,叶雄英,周兆英,熊沈蜀,魏强,索利洋

DOI: https://doi.org/10.3321/j.issn:1000-0054.2004.02.016

2004-01-01

Abstract:This paper presents a microphotography and wireless transmission system for use in micro aerial vehicles (MAVs). The surveillance devices in MAVs must be carefully designed because of their quite limited payload capability. The developed system is small and lightweight but with high performance. This paper describes the system components in the microphotography unit, the radio frequency unit and the reception station. The parts in the MAVs weigh 16 g (including the camera and the antenna) with a size of 30 mm×40 mm×5 mm. The system can transmit and receive real-time video and has a practicable distance of 1 km (line of sight). The system provides a reliable, light microphotography, and wireless transmission system for MAVs with 320 mm wingspan.
Design of Ground Control Station for Mini Unmanned Aerocraft Vehicle

徐雷,裴海龙,刘馨,陈镔

DOI: https://doi.org/10.3969/j.issn.1001-9944.2009.06.011

2009-01-01

Abstract:Ground control station(GCS) is an important part of the entire UAV system.This paper presents the design and implementation of GCS for an autonomous helicopter.It analyzes the three major functional modules in the realization of the ground station.On this basis,it discusses the key technical issues about these modules.With Linux operating system,it is developed based on NetBeans 6.5 platform with Java language.Through the introduction of timer,the platform can receive real-time fly data with high-resolution timer while storage the data,display,plan the mission and playback the data.
Flight Control System for Micro Aerial Vehicles Based on MEMS Sensors

Rui-yong ZHAI,Zhao-ying ZHOU,Wen-dong ZHANG,Jia LIU,Qi-rui SUN

DOI: https://doi.org/10.3969/j.issn.1002-1841.2014.12.023

2014-01-01

Abstract:To compensate the limited payload capability of small unmanned air vehicles ( UAVs ) , an integrated automatic flight control system was developed based on micro-electro-mechanical system ( MEMS) sensors.The hardware composition and structure diagram were introduced,and the navigation algorithm was recommended in detail,which included airspeed control,longi-tudinal control and lateral control.Flight experiments were carried out on a micro self-developed fixed-wing UAV.The experiment results prove that the flight control system can guide the UAV to track the expected path under specified height,which satisfies the desired patrol mission requirements.
The Water Detection System for Mini Unmanned Aerial Vehicles

HU Yi,LI Ping,HAN Bo

DOI: https://doi.org/10.3969/j.issn.1001-4551.2006.12.012

2006-01-01

Abstract:According to MUAV's own speciality,a water detection system with a high-resolution CCD camera,an Ultra sonic range finder and wireless broadcasting stations as the hardware platform were described.By means of multi-feature extraction and data fusion algorithm,the results of the water detection tests on Voyage260 MUAV proved the system's practicability.
A Miniature Integrated Navigation System for Rotary-Wing Unmanned Aerial Vehicles

Yu Xu,Wenda Sun,Ping Li

DOI: https://doi.org/10.1155/2014/748940

IF: 1.4

2014-01-01

International Journal of Aerospace Engineering

Abstract:This paper presents the development of a low cost miniature navigation system for autonomous flying rotary-wing unmanned aerial vehicles (UAVs). The system incorporates measurements from a low cost single point GPS and a triaxial solid state inertial/magnetic sensor unit. The navigation algorithm is composed of three modules running on a microcontroller: the sensor calibration module, the attitude estimator, and the velocity and position estimator. The sensor calibration module relies on a recursive least square based ellipsoid hypothesis calibration algorithm to estimate biases and scale factors of accelerometers and magnetometers without any additional calibration equipment. The attitude estimator is a low computational linear attitude fusion algorithm that effectively incorporates high frequency components of gyros and low frequency components of accelerometers and magnetometers to guarantee both accuracy and bandwidth of attitude estimation. The velocity and position estimator uses two cascaded complementary filters which fuse translational acceleration, GPS velocity, and position to improve the bandwidth of velocity and position. The designed navigation system is feasible for miniature UAVs due to its low cost, simplicity, miniaturization, and guaranteed estimation errors. Both ground tests and autonomous flight tests of miniature unmanned helicopter and quadrotor have shown the effectiveness of the proposed system, demonstrating its promise in UAV systems.
Vision System for Mini Unmanned Aerial Vehicles Based on DSP

ZHAO Liang,HAN Bo,LI Ping

DOI: https://doi.org/10.3969/j.issn.1001-4551.2007.02.025

2007-01-01

Abstract:Vision system as an important part of Mini unmanned aerial vehicles(UAV) could complete air-shot,object recognition,vision navigation and many other missions.It was described how to establish a vision system for Mini UAV,considering its own specialty,by using DSP and random hough transform(RHT) separately as hard platform and image recognize arithmetic.Finally the practicability of this vision system by RAPTOR 60 V2 helicopter was verified.
Micro Air Speedometer for Mavs

XH Wang,ZY Zhou,GL Wang,R You

DOI: https://doi.org/10.1109/mhs.2001.965224

2001-01-01

Abstract:A micro air speedometer for micro air vehicles (MAVs) is presented. A MAV is an intelligent microsystem applying MEMS technologies. The micro air speedometer consists of a propeller driven encoder, an infrared LBD as light emission element, a phototriode as detector, and a SCM as signal processor. A speedometer demonstration system is also presented in this paper
Wireless Measurement and Control System for a Novel Bionic Micro-Robot

王金光,杨岑玉,王喆,王庆蒙,宋涛

DOI: https://doi.org/10.3724/sp.j.1218.2010.00034

2010-01-01

ROBOT

Abstract:A measurement and control system based on magnetic field and radio signal is designed,which controls the magnetotactic bacterium-like micro-robot and measures its experimental parameters with wireless method.The measurement and control system consists of micro-robot posture measurement subsystem and micro-robot control subsystem.In the mea-surement subsystem,state of the micro-robot is obtained by processing the signal detected with magnetic sensors array in real time,and is compared with video tracking result.In the control subsystem,the speed of micro-robot is controlled by PWM(pulse-width modulation) signals of radio transmitter,and the orientation of the micro-robot is controlled by guide magnetic field.90° turning movement control is studied experimentally in the system.And results verify that the system can effectively control the bionic micro-robot.
The Design and Implementation of MUAV's Digital Control System Based on RTLinux

方舟,李平,韩波

DOI: https://doi.org/10.3969/j.issn.1001-4551.2004.11.016

2004-01-01

Abstract:This paper accounts for the design problem of on-board digital control system for MUAV based on RTLinux. Specially, an effective approach is presented to solve the problem of collecting data from serial ports using interrupt mechanism in user's realtime threads. A reasonable software structure for the control system is also presented ,and the state estimation part has been implemented under RTLinux successfully. The results of on-board tests prove its effectiveness.
Research on Flow Sensor System Integrated with Wing of Micro Air Vehicle

刘旭东,朱荣,续立军,张福星,刘鹏,周兆英

DOI: https://doi.org/10.3969/j.issn.1004-1699.2009.07.008

2009-01-01

Abstract:The basic theory of the hot wire/ film anemometer and its application in measuring the flight parameters of MAVs (Micro Air Vehicles) are presented.The thin film resistance is selected as the sensitive element and works in the constant-temperature mode.The model of the sensor is identified by using least square approach,and the data acquired through wind tunnel experiment.The measuring accuracy is estimated to be 1m/s for airflow speed with a range of 2~12 m/s;1 degree for angle of attack with a range of 0~20 degree;and 1 degree for angle of sideslip with a range of-16~18 degree,all of which meet the requirements for applications of the flow field measurements on the wing of MAVs.
Micro Air Vehicle. Architecture and Implementation.

HY Wu,D Sun,ZY Zhou,SS Xiong,XH Wang

DOI: https://doi.org/10.1109/robot.2003.1241649

2003-01-01

Abstract:This paper presents the development of an electrically powered micro air vehicle (MAV) with a wingspan of 360 mm. A miniature flight control system including a self-made micro video image system especially suitable for MAV is developed. The aerodynamic performance of several airfoil sections at low chords Reynolds number is analyzed in order to find an optimum airfoil section for the MAV prototype. A small-sized propulsion testing setup is built to measure the performance of the motor-gear-propeller-battery combination so that an efficient propulsion system can be obtained. The TH360 MAV with a payload of a self-made micro color video image system has been successfully tested in the real-time flight, where the real-time images of the ground target can be transmitted from the onboard video camera to the ground.
Design and Implementation of Ground Control Station for Small-scale Unmanned Helicopter

YU Ke,LI Ping,LUO Ping-bo,FANG Zhou,ZHANG Hong

DOI: https://doi.org/10.3969/j.issn.1000-3428.2012.08.071

2012-01-01

Abstract:Through the requirement analysis for the Ground Control Station(GCS) of Small-scale Unmanned Helicopter(SUH),not only the structure and function of GCS are introduced for SUH,but also the solution to the key technologies is analyzed.The GCS is based on VC++ development environment and embedded Matlab technique.The GCS for SUH is applied in a small-scale unmanned helicopter,and the flight experimental results show that it has perfect real-time property,good stability,friendly man-machine interface,strong expandable ability,etc.
Micro Air Vehicle: Configuration, Analysis, Fabrication, and Test

HY Wu,D Sun,ZY Zhou

DOI: https://doi.org/10.1109/tmech.2004.823885

2004-01-01

IEEE/ASME Transactions on Mechatronics

Abstract:This paper presents the development of two electrically powered micro air vehicle (MAV) prototypes with wingspans of 380 and 360 mm, respectively. A miniature flight control system is constructed using small and light components. A vision system consisting of a micro radio frequency (RF) transmitter and a miniature vision-receiving antenna with a low-noise amplifier is designed, which exhibits advantages over commercial ones. The aerodynamics of several airfoil sections at low chord Reynolds numbers are theoretically analyzed, for the layout of on-board components and the airfoil design. A small-sized propulsion/power testing setup is developed to measure and analyze the static performance of the motor/propeller/battery combination used for MAV prototype. The materials and methods used to build MAV prototypes are also presented. Two MAV prototypes, TH380 and TH360, have been successfully tested in the flight, where TH360 MAV with a payload of a home-made micro vision system can acquire the images of objects and transmit them back to the ground station.
Aerial Remote Sensing Automatic Control System for UAV

Pengqi Gao,Lei Yan,Hongying Zhao

DOI: https://doi.org/10.1117/12.757368

2008-01-01

Abstract:With maturation of UAV (Unmanned Aerial Vehicle) key techniques, the UAV aviation is more stable than before. That shows us the possibility of reconnaissance in atrocious environment. Here the structure of an UAV remote sensing platform is given out first. Then the control system modules of aerial remote sensing and their functions with each realization are discussed in detail. The experiments show that the system can satisfy the needs for aerial remote sensing task.
Thermomechanical Behavior in Continuous Bloom Casting with Different Mold Tapers

Fu Xu,Zhou Zhaoying,Xiong Wei,Guo Qi

DOI: https://doi.org/10.1016/s1007-0214(08)70098-1

2008-01-01

Abstract:Small unmanned air vehicles （UAVs） can be used for various kinds of surveillance and data collec-tion missions. The UAV flight control system is the key to a successful mission. This paper describes a low-cost micro-electro mechanical system-based flight control system for small UAVs. The integrated hard-ware flight control system weighs only 24 g. The system includes a highly-integrated wireless transmission link, which is lighter than traditional links. The flight control provides altitude hold control and global posi-tioning system navigation based on gain scheduling proportional-integral-derivative control. Flight tests to survey the grass quality of a large lawn show that the small UAV can fly autonomously according to a series of pre-arranged waypoints with a controlled altitude while the wireless video system transmits images of the surveillance target to a ground control station.
Research On Wireless Networks Of Data Transmission For Micro Aerial Vehicles

Ly Suo,Zy Zhou,Xh Wang,W Qiang

2003-01-01

Abstract:In general, the technology of communication of a Micro Aerial Vehicle (MAV) is of crucial importance of the control and remote sensing of a MAV. Now the special communications device on MAVs can transmit data with good reliability within 1.5 km, but the point-to-point transmitting mode of communication system is not appropriate for the further distance transmission.The article focuses on a new method of MAVs' communication technology - the cluster communication mode. We designed and realized data sharing and transmitting in further distance by wireless networks.In the wireless networks key points of the communication include command identity, data reliability, transmission security, system micromation, and low power consumption. The stability of the terminals and base control stations of the network system is also important to wireless transmission.In order to apply the wireless networks to MAVs, an application sample with system micromation, command identity, reliability and logic control is given. The sample described here is mainly depended on Global System for Mobile Communication (GSM). The hardware and software of the terminal for GPS data collection are designed and executed, also a base ground station that consists of computer and communication devices is built. The system can work within effective radius of 100km, including receiving, saving and processing data, and it also can transmit GPS data to the control center station on the ground and be controlled by the station in further distance.

Signal Measurement and Control System in Micro Air Vehicle

Survey of Wide Area Measurement System

Miniature Wireless Data Communication System for Micro Air Vehicles

Research on multi-parameter measure and control technology based on wireless communication in combined environment testing

Design and Hardware-in-the-loop Simulation of MUAV's Flight Control System

Microphotography and Wireless Transmission System for Micro Aerial Vehicles

Design of Ground Control Station for Mini Unmanned Aerocraft Vehicle

Flight Control System for Micro Aerial Vehicles Based on MEMS Sensors

The Water Detection System for Mini Unmanned Aerial Vehicles

A Miniature Integrated Navigation System for Rotary-Wing Unmanned Aerial Vehicles

Vision System for Mini Unmanned Aerial Vehicles Based on DSP

Micro Air Speedometer for Mavs

Wireless Measurement and Control System for a Novel Bionic Micro-Robot

The Design and Implementation of MUAV's Digital Control System Based on RTLinux

Research on Flow Sensor System Integrated with Wing of Micro Air Vehicle

Micro Air Vehicle. Architecture and Implementation.

Design and Implementation of Ground Control Station for Small-scale Unmanned Helicopter

Micro Air Vehicle: Configuration, Analysis, Fabrication, and Test

Aerial Remote Sensing Automatic Control System for UAV

Thermomechanical Behavior in Continuous Bloom Casting with Different Mold Tapers

Research On Wireless Networks Of Data Transmission For Micro Aerial Vehicles