Abstract:Electrocardiogram (ECG) is a vital tool used for diagnosing various heart diseases. It is the graphical representation of the electrical activity of the heart. But the electrocardiographic signals are often corrupted by noise from diverse sources. The most significant noises that corrupt ECG signal are power line interference and baseline wanders. It is necessary to reduce the amount of these disturbances from ECG signal for proper identification and interpretation of heart condition. This paper investigates the performance of the different 'Band stop filter-High Pass filter' combinations of window based FIR filter for removing the baseline wander and power line noise present in electrocardiogram. The ECG signal is generated and then noises are added to the ECG signal using MATLAB® where filters are designed and analyzed using Filter Design and Analysis Tool (FDATool). 49 different 'Band stop filter-High Pass filter' combinations are made using seven different FIR windows namely Bartlett, Chebyshev, Hamming, Hann, Kaiser, Rectangular, Triangular. For filter order of 350 and 450, the performance of different window combinations are compared and analyzed in terms of Signal power, Peak-to-peak value, Signal to Noise Ratio (SNR) and Mean Square Error (MSE) of the filtered output. A further analysis of the waveforms of the filtered output show that the combinations where both the bandstop and highpass filters are either Kaiser or Rectangular window i.e. Kaiser-Kaiser, Kaiser-Rectangular, Rectangular-Kaiser and Rectangular-Rectangular windows give the best performance in reducing both the baseline noise and high frequency power line noise. It is also found that the reduction of baseline noise is better if 450 filter order is used instead of 350 order in the above mentioned best four combinations, although the amount of delay for 450 order is slightly higher.

An Efficient ECG Baseline Removal Filter Based on Frequency Response Masking Technique for Wearable Applications

Elimination of ECG Baseline Drift Using Meyer Wavelet

Baseline wander removal methods for ECG signals: A comparative study

A Modiifed Real-time Filtering Method for Removal of Baseline Wander in ECG Signals Based on Zero-phase Filter

DeepFilter: An ECG baseline wander removal filter using deep learning techniques

Baseline Wander Removal of ECG Signals Using Empirical Mode Decomposition and Adaptive Filter

Combinations of Different FIR Windows for Removal of Baseline and Power Line Noise from Electrocardiogram

Electrocardiogram Baseline Wander Suppression Based on the Combination of Morphological and Wavelet Transformation Based Filtering

A de-noising algorithm for ECG signals based on FIR filter and wavelet transform

Kalman Filter Based Electromyographic Signal Suppression of Real-Time ECG Signal

Reconfigurable Architectures with High-Frequency Noise Suppression for Wearable ECG Devices

A New Method for Removal of Baseline Wander and Power Line Interference in Ecg Signals

An Impulsive Noise Rejection Filter for Wearable ECG Signal Processing

A novel low-complexity digital filter design for wearable ECG devices

An error-bounded median filter for correcting ECG baseline wander

A New Method Based on Discrete Cosine Transform for Removal of ECG Baseline Wander

The energy-efficient implementation of an adaptive-filtering-based QRS complex detection method for wearable devices

Application of an EMG interference filtering method to dynamic ECGs based on an adaptive wavelet-Wiener filter and adaptive moving average filter

A New Algorithm For Removal Baseline Wander In Ecg Signal Based On Empirical Mode Decomposition

[Adaptive Removal of Motion Artifact from ECG Based on Impedance Detection].

An Applied Baseline Filtering Algorithm