Abstract:It is relatively difficult to monitor the deformation of slope body in model test. To solve this problem, the optical fiber sensing technique is applied to slope model test. By constructing physical model for slope under artificial rainfall,the deformation in slope body can be monitored by optical fiber sensing technology of Brillouin optical time domain reflectometer(BOTDR);and the deformation on slope surface can be monitored by fiber Bragg grating(FBG). Regarding the fixed point on the model box as the reference point,the variations in slope body can be monitored by the optical fiber preburied in the different locations of slope;and the deformation on slope surface can be achieved by the FBG sensor set on the slope surface. According to the recorded data of deformations before,during and after rainfalls,it can be found that the deformation of slope is not obvious in initial period of rainfall,but as the time goes on,there is a sudden growth of the deformation in the slope body and surface. The part of the slope closer to the surface has the larger deformation,but the part at the bottom of the slope has the least deformation. The overall law is that the influence of rainfall on slope body diminishes gradually with increase of depth of slope body. That can explain why the homogeneous soil-slope′s failure induced by rainfall is easy to occur in shallow strata. In the slope surface,the maximum deformation appears in the trailing edge of slope,and the minimum one appears in the front edge. After the rainfall,a part of the deformations in the slope reduces to a lower value. The experimental result has proven that the optical fiber sensing technologies of BOTDR and FBG have many advantages in the monitoring of geotechnical engineering,and they can offer practical references and prospects on application.

Internal Deformation Monitoring of Slope Based on Botdr

APPLICATION OF OPTICAL FIBER SENSING TECHNOLOGY TO SLOPE MODEL TEST

APPLICATION OF FBG SENSOR TO INTERNAL DISPLACEMENT MONITORING OF SURROUDING ROCK

Application of Surface Deformation Monitoring of Slope Using BOTDR Technology

STUDY ON DISTRIBUTED OPTICAL FIBER SENSOR-BASED MONITORING FOR SLOPE ENGINEERING

A Study On Botdr-Based Distributed Monitoring For Slope Engineering

Distributive monitoring of the slope engineering

Distributed Fiber Monitoring Test and Its Application to Slope Deformation

Monitoring of Lateral Displacements of a Slope Using a Series of Special Fibre Bragg Grating-Based In-Place Inclinometers

In-situ Monitoring of Displacements and Stability Evaluation of Slope Based on Fiber Bragg Grating Sensing Technology

Application of BOTDR into structural bending monitoring

A feasibility research on foundation pit monitoring using BOTDR

Application of CCD Micro-Deformation Monitoring Technology to Slope Remote Monitoring

A Study on Tunnel Deformation Monitoring Based on BOTDA

Experimental Study of Foundation Pit Monitoring Using BOTDR-based on Distributed Optical Fiber Sensor

A study on BOTDR application in monitoring deformation of a tunnel

Study on the Fixation Technique of Optical Fiber Based on BOTDR

Theoretical and Experimental Study on the Fiber Bragg Grating-Based Inclinometer for Slope Displacement Monitoring

Development and Application of an Optical Fiber Sensor Based In-Place Inclinometer for Geotechnical Monitoring

Analysis of the strain process of soil slope model during infiltration using BOTDA

A New Distributed Optical Fiber Sensor For Structural Health Monitoring - Botdr